AEG LloydCombo 15 Manual de instrucciones

QUICK USER GUIDE

CORDLESS

TELEPHONE

Lloyd Combo15

PTESITNLFRDEUK

P1 P2

P4 P5

11 12 5 6

8910

14 15 1617

1 BECAUSE WE CARE

Thank you for purchasing this product. This product has been designed

and assembled with utmost care for you and the environment. This is

why we supply this product with a quick installation guide to reduce

the number of paper (pages) and therefor save trees to be cut for

making this paper. A full and detailed user guide with all the features

descripted can be found on our website www.aegtelephones.eu.

Please download the full user guide in case you want to make use of

all the advanced features of your product. To save the environment we

ask you not to print this full user guide. Thank you for supporting us to

protect our environment.

2 IMPORTANT SAFETY INSTRUCTIONS

Please follow these safety instructions when using your telephone

equipment to reduce risk of ﬁre, electric shock and injury:

• Read and understand all the instructions.

• Follow all warnings and instructions marked on the product.

• Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

• Keep this product away from hot, humid conditions or strong

sunlight, and don’t let it get wet or use it near water (for example,

near a bath tub, kitchen sink, and swimming pool).

• Do not overload wall outlets and extension cords as this can result in

the risk of ﬁre or electric shock.

• Unplug this product from the wall outlet under the following

conditions:

>When the power supply cord or plug is damaged.

>If the product fails to operate normally despite following the

operating instructions.

>If the product has been dropped and the cabinet has been

damaged.

>If the product exhibits a distinct change in performance.

• NEVER use your phone outdoors during a thunderstorm. Unplug the

base from the telephone line and the mains socket when there are

storms in your area. Damage caused by lightning is not covered by

the guarantee.

• Do not use the telephone to report a gas leak in the vicinity of the

leak.

• Use only the supplied NiMH (Nickel Metal Hydride) batteries that

came with your phone or an authorized replacement recommended

by the manufacturer. There is a risk of explosion if you replace the

battery with an incorrect battery type. The use of other battery types

or non-rechargeable batteries/primary cells can be dangerous. They

may cause interference and/or damage to the unit or surroundings.

The manufacturer will not be held liable for damage arising from

such non-compliance.

• Do not use third party charging pods. Damage may be caused to

the batteries.

• Please ensure that the batteries are inserted in the correct polarity.

Dispose of batteries safely. Do not burn, immerse them in water,

disassemble, or puncture the batteries.

3 INTENDED USE

This telephone is intended to be connected to a public analogue

telephone network or to an analogue extension of a compatible PBX

system.

4 INSTALLING YOUR PHONE

4.1 Connecting the Base Station (See P5)

• Plug the mains power cable and telephone line cord into the base

station.

• Plug the power adapter into a 100 - 240Vac, 50 - 60Hz mains power

socket and the telephone line cord into a telephone line socket.

Warning: Always use the cables provided in the box. Use only the

supplied adaptor. Using other power adapter may damage the unit.

Note: Place the base unit within easy reach of the mains power socket.

Never try to lengthen the mains power cable. The base station needs

mains power for normal operation and the cordless handsets will not

work without it.

4.2 Installing and Charging the Rechargeable Batteries(see P3)

• Insert the 2 supplied batteries into the battery compartment,

observing the correct polarity (see markings inside battery

compartment).

Warning: Use only the supplied NiMH rechargeable batteries.

• Place the back cover over the back of the handset and press down

until it clicks into place.

• Place the handset on the base and charge for 15 hours before using

the handset for the ﬁrst time.

>The handset will give a double beep when it is properly

placed on the base and the battery charging indicator

on the base lights up to indicate charging.

Note:

The handset may become warm when the batteries are being charged

or during prolonged periods of use. This is normal and does not

indicate a fault.

CAUTION

Risk of explosion if the battery is replaced by an incorrect type. Dispose

of used batteries according to the instructions.

5 SET THE HANDSET LANGUAGE

• Press M and .to select HS SETTINGS.

• Press M and .to select LANGUAGE.

• Press M and .to select the desired language.

• Press M to conﬁrm.

6 GET TO KNOW YOUR PHONE

6.1 Handset Overview(see P1)

• In idle mode: Press to access the main menu.

• In sub-menu mode: Press to conﬁrm the

selection.

• During a call: Press to access Intercom/

Phonebook/Redial List/ Call List.

• In idle mode: Press to initiate an intercom call.

• In main menu mode: Press to go back to the idle

screen.

• In sub-menu mode: Press to go back to the

previous option, or press and hold to go back to

the idle screen.

• In editing / pre-dial mode: Press to delete a

character / digit, or press and hold to delete all

the characters / digits.

• During a call: Press to mute / unmute the

microphone.

• In idle mode: Press to access the call list.

• In menus and lists: Press to move up the options.

During a call: Press to increase the volume.

• During ringing: Press to increase the handset

ringer volume.

• In idle mode: Press to access the redial list.

• In menus and lists: Press to move down the

options.

• During a call: Press to decrease the volume.

• During ringing: Press to decrease the handset

ringer volume.

• In idle mode / predialling mode / Redial list /

Call List / Phonebook List: Press to make a call.

• During ringing: Press to answer a call.

• During a call: Press to turn on / off the

speakerphone.

• During a call: Press to end a call and go back to

the idle screen.

• In menu / editing mode: Press to go back to the

previous menu, or press and hold to go back to

the idle screen.

• In idle mode: Press and hold to power on/off the

handset.

ALPHA-

NUMERIC

KEYPAD,

*, #

• Press to insert a digit / character / * / #

• * key in idle mode: Press and hold to enable or

disable the keypad lock.

• # key in idle mode: Press and hold to turn on / off

the handset ringer.

• # key in predialling / number editing mode:

Press and hold to insert a pause.

• * key in Call List mode: Press to view more digits

of the caller’s number if applicable.

8F• During a call press to send a Recall signal (also

called Flash) for network services.

9• Microphone

10 • Speaker

11 • Call blocker

6.2 Base Station Overview(see P4)

ALPHA-

NUMERIC

KEYPAD

During dialling or storing a number: Press to

enter digits.

2During dialling or storing a number: Press to

insert a #. Press and hold to insert a pause (P).

3In idle mode: Press to dial to the last number

dialled.

4During a call: Mute/unmute the microphone.

During a call: Press to increase the volume.

When ringing: Press to increase the corded base

ringer volume.

6During a call: Press to decrease the volume.

When ringing: Press to decrease the corded

base ringer volume.

7In idle: Press to access the line in speakerphone

mode.

8During dialling or storing a number: Press to insert

a *.

9During a call: Press to send a Recall signal

(also called Flash).

10 In idle/During a call: Press to access the

intercom list or make an intercom call

directly if only one handset is registered.

11 In idle mode: Press to ﬁnd/page

all registered cordless handsets.

Press and hold to enter registration mode.

12 In use

LED

Steadily ON: During a call.

Flashing: During ringing or new TAM

message is received.

13 Charge

LED Steadily on while the handset is charging.

14 ANS ON/OFF - Press to turn the answering

machine on or off.

15 PLAY/STOP - Press to start or stop

message playback.

DELETE - Press to delete the playing message.

When the phone is not in use, press and hold to

delete all previously reviewed messages.

On when the answering machine (TAM) is ON.

Flashes if new TAM messages are recorded, or

when the TAM is being used.

6.3 Handset LCD Display Icons and Symbols(see P2)

The LCD display gives you information on the current status of the

telephone.

Displays when the handset is registered and within range

of the base station, with more blocks indicating a stronger

signal.

Indicates the handset is on a call.

Flashes when there is an incoming call.

Indicates the handset ringer is switched off.

Indicates an alarm is set. Flashes when the alarm is

sounding.

Indicates the keypad is locked.

Indicates the battery is fully charged.

Battery segments cycle during charging.

Indicates the battery needs charging. Flashes when

low battery power level is detected. (Note: the handset

backlight will not turn on when the battery is low.)

Indicates a new TAM message is playing or a new call is

being viewed in the calls list.

Indicates the speakerphone is turned on.

Indicates you have a new voicemail message. (This is a

caller display service and is not usually available from UK

network providers.)

Indicates the answering machine (TAM) is turned on.

Flashes if there is a new TAM message.

Indicates when any block mode is turned on.

6.4 Text and Digit Entry

In editing mode, a cursor is displayed to indicate the current text entry

position. It is positioned at the right of the last character entered.

Writing Tips:

Once a character is selected, the cursor will move to the next position

after a short pause.

You can move the cursor within the text by.to amend the text

entry.

• Press to delete the last character.

• Press and hold to delete the entire text string.

7 USE YOUR PHONE

7.1 Make a Call

7.1.1 Preparatory Dialing

• Enter the phone number, maximum 24 digits. If you make a mistake,

press to delete the last digit.

• Press to dial the number.

7.1.2 Direct Dialing

• Press to take the line.

• Enter the phone number to dial.

7.1.3 Call from the Phonebook

• Press M then . to select PHONEBOOK. Press M to

show ALL CONTACTS.

• Press M again to access phonebook.

NOTE

The ﬁrst phonebook entry will be displayed. If there is no entry in the

phonebook, it will show EMPTY.

• Press . to select the desired phonebook entry.

• Press to dial the number.

Tabla de contenidos

Idiomas:

Otros manuales de Teléfono inalámbrico de AEG

AEG

AEG Voxtel D570 twin Guía

AEG

AEG Voxtel D205 Manual de usuario

AEG

AEG Voxtel Smart 3 Manual de usuario

AEG

AEG Voxtel Smart 3 Manual de usuario

AEG

AEG voxtel D550BT Manual de usuario

AEG

AEG LLOYD 15 Manual de instrucciones

AEG

AEG voxtel D550BT Manual de instrucciones

AEG

AEG Thor15 Manual de instrucciones

AEG

AEG Voxtel S110 Combo Manual de usuario

AEG

AEG Voxtel D555 twin Manual de instrucciones

AEG

AEG Voxtel S100 Manual de usuario

AEG

AEG Voxtel S120 Manual de usuario

AEG

AEG VOXTEL D500 Manual de usuario

AEG

AEG Smart 64 Manual de instrucciones

AEG

AEG Boomerang 10 Manual de usuario

AEG

AEG Voxtel D200 Manual de usuario

AEG

AEG Voxtel M310 Manual de usuario

AEG

AEG Thor 15 Manual de instrucciones

AEG

AEG Birdy Manual de usuario

AEG

AEG Voxtel D550 Manual de instrucciones

AEG

AEG LOOP Manual de usuario

AEG

AEG Voxtel D85 twin Manual de usuario

AEG

AEG Voxtel S100 Manual de usuario

AEG

AEG Beat 15 Manual de usuario

Manuales populares de Teléfono inalámbrico de otras marcas

3Com

3Com NBX Manual de usuario

Panasonic

Panasonic KX-TGK210HK Manual de usuario

Panasonic

Panasonic KX-TCA181EX Manual de usuario

BT FREESTYLE 3200 Manual de usuario

AT&T

AT&T CL84102 Manual de usuario

BREZZICNI

BREZZICNI CL-3622 Manual de usuario

Panasonic

Panasonic KX-TG1831NZ Manual de usuario

Panasonic

Panasonic KX-TG7301E Manual de usuario

Furuno

Furuno FM-4721 Manual de usuario

Sanyo

Sanyo CLT-J70 Manual de usuario

Amplicomms

Amplicomms BigTel 201 Manual de usuario

GE 26992 Manual de usuario

AT&T

AT&T E1812B Manual de usuario

Sanyo

Sanyo CLT-670 Manual de usuario

GE 15432970 Manual de usuario

Curtis

Curtis TC595 Manual de usuario

Gigaset

Gigaset Gigaset 3000 Micro Manual de usuario

Poly

Poly VVX D230 Guía de configuración