aee.com
-7-
Preparations
Before using the SD23 video camera, complete the following preparations:
① Power on the SD23 video camera and check the power level
Turn the power switch to the “ON” position to initiate the system. After the red indicator is on, the corresponding
symbols on the LCD screen turns on and then the system enters the preview state. On the LCD segment screen, you can
find the following information:
A A ” “ Recording mode: The current recording mode is displayed on the LCD segmen screen. The icon indicates the
video mode, whereas the icon ” “ indicates audio mode.
B Photo mode: The ” “ (shooting) icon is displayed on the screen. This icon blinks once for each shooting.
C Power symbol: The ” “(power supply) icon is displayed in the upper-right corner. When the system is working, this
icon is constantly on. If this icon disappears, it indicates the SD23 video camera is in power-off or standby state.
video, for example, ”005:20“. In the preview state, press the ““key once to display the duration of the video
recording, and press the “Stop“key once to hide the duration. .
Note: The duration for video recording on the LCD segment screen is synchronously displayed with that on the TFT screen.
E Battery capacity indication: The” ”(battery capacity) icon is displayed in the bottom-left corner. This icon indicates
the battery level when the video camera is powered on. The more bars the power indicator has, the more power the
battery has.
Note: When the video camera is in the standby or power-off state, the power icon is not displayed.
F USB connection mode: The “ ”(USB mode) icon indicates whether the video camera has been connected to a
computer. When the video camera is powered on and connected to a computer, this icon is lit with the green indicator
on the left side blinking slowly. When the video camera is not connected to a computer, this icon is not displayed.
TF card capacity indication: The ” “(TF card capacity) icon is displayed in the bottom-right corner, indicating the
available space of the TF card. The more bars the power indicator has, the more free space you have. If the TF card is
full, the green indicator on the left side is constantly on.
At this time, on the TFT screen, you can find the following information:
camera is ready for video recording.
