
4
Operation
6. How to set stamps for: Date, Speed, GPS and Driver number
Long press UP for Menu, the press UP & DOWN buttons to select
DATE STAMP, to toggle On / Off.
Long press UP for Menu, the press UP & DOWN buttons to select
SPEED STAMP, to toggle On / Off.
Long press UP for Menu, the press UP & DOWN buttons to select
GPS STAMP, to toggle On / Off.
Long press UP for Menu, the press UP & DOWN buttons to select
DRIVER NUMBER, to set a driver number which will appear on the stamp.
1. Inserting a MicroSD card
Insert a MicroSD card meeting specifications listed on www.4WDsupacentre.com.au
2. Turning on your Camera
Press Power button to turn ON / OFF the camera. Or connect to the car charger
directly; the camera will turn on automatically when it receives 5v USB power.
3. Setting Language
Long press UP for Menu, then press UP & DOWN buttons to select LANGUAGE, set
preferred language (Default: English) then press OK button to confirm.
4. Setting Date and Time
Long press UP for Menu, then press UP & DOWN buttons to select TIME SETUP, set
time (year/month/day – hour : minute : second) then press OK button to confirm.
5. Recycle Settings (Loop Recording)
Long press UP for Menu, the press UP & DOWN buttons to select RECYCLE, set
recycle rate (Off / 1min / 3min / 5min).
OFF MODE:
• The device won’t record automatically and won’t recycle recordings.
• Maximum length of each recorded video file is 3.66GB. When it reaches the
maximum, the recording is automatically split and saved as another file.
•If the storage space is full, previous files will NOT be deleted, screen will show
“Card full” and recording will NOT continue.
1/3/5MIN MODE:
• When power is supplied to the camera the device will start
recording automatically.
• If the storage space if full, the oldest saved file will be overwritten.
DASHcam manual.indd 4 17/08/2016 10:16 AM