Product Description
The Adveco range of EB0025, EB0028 and EB0030 control panels are complete wiring stations for a water
heating installation, providing power to primary and secondary heat sources to ensure a reliable supply of hot
water. Delivered prewired and ready to wall mount in an IP65-rated protective box, the panels include
automatic changeover functions from duty to a backup heat sources in response to a fault, a change in hot water
demand or differential tariff supplies.
All control panels include a system isolator, internal aerial, overload protection and volt-free contacts for BMS
error signal support. Optional heat recovery controls are included within the panels as standard, for use with the
Adveco HR001 Heat Recovery Box and Danfoss condenser units, or Scutts condenser units. Also included in
each panel is a GSM module designed to keep off-site facilities management informed of any appliance faults;
this will automatically send text and/or email alerts to the relevant service contacts immediately upon failure of a
primary heat source, as well as delivering a periodic healthy status report.
Adveco EB0025 Control Panel:
The EB0025 control panel includes a gas to electric auto-changeover function and is designed for use with an
SGE, SGS or BFC condensing gas-fired water heater with an electric backup heating element of up to 9kW
capacity. This produces a highly efficient and reliable water heating solution, with a gas-fired primary heat
source optionally supporting a fridge/freezer heat recovery process with additional electric immersion heater
backup.
Adveco EB0028 Control Panel:
The EB0028 control panel includes an electric to electric changeover function and is designed for use with
systems containing an ITE indirect electric water heater, or an IT indirect tank plus ST storage tank, with an
EB0027 dual-circuit 18kW/9kW electric immersion heater. The primary electric immersion heater can be used
to support an optional heat recovery process or provide the entire heating load, and contains an inbuilt 9kW
backup to ensure a reliable supply of hot water. The control panel also includes a seven-day timeclock and
controls for use with a destratification pump to be used for anti-Legionella purge cycling.
Adveco EB0030 Control Panel:
The EB0030 control panel includes a gas to electric auto-changeover function and is designed for use with a
BFC or SGS condensing gas-fired water heater in addition to an IT indirect tank with backup electric immersion
heater. The primary gas burner serves as a highly efficient source of hot water and can support preheating by
optional fridge/freezer heat recovery processes, with up to 9kW of backup electric heating capacity. The
control panel additionally includes a seven-day timeclock and controls for use with a destratification pump to be
used for anti-Legionella purge cycling.
This system is available as a fully packaged, prefabricated solution, enclosed within purpose-built GRP housing
for rooftop installation.
Available Ancillaries:
Adveco strive to offer a complete range of water heating solutions to meet the needs of an end user. The
following ancillaries are available and are compatible with the EB0028:
PRACTICAL, EFFICIENT & SUSTAINABLE BUILDING SERVICES SOLUTIONS
4
EB0025-EB0028-EB0030 Control Panel - Installation and maintenance manual
