3) Connect the adapter into an electrical outlet. Plug the adapter’s connector into
charging port.
4) While charging, the amber indicator will stay on, green indicator means the unit is fully
charged. Re-charge time after first use usually takes approximately 2 hours.
Pairing and establish a connection:
Please make sure you have paired the product with Bluetooth AV sources before you
start to use. Kindly follow the instructions below for pairing:
1) Turn your ABT-SPK-A Bluetooth Wireless Speakers on by press and hold the
「 」
button until indicators blink rapidly. At this moment, the product is in pairing mode.
2) At this time, you need to activate your other Bluetooth devices for searching the
ABT-SPK-A Bluetooth Wireless Speaker, please follows the original instruction of your
other Bluetooth devices. Choose the device name and enter「
「「
「1234」
」」
」on your keyboard
to establish a pairing connection.
3) The ABT-SPK-A Bluetooth Wireless Speakers supports two audio connections.
Please select HEADSET/HANDSFREE profile if you like to connect to the mobile phone.
Or A2DP/AVRCP profile for stereo sound effect to your audio sourcing.
4) After successful connection, the indicators will turn to regular blinking at twice every
second.
Note: f the pairing can not be established within 60 seconds, the blue
indicator turns to regular blinking once every 2 second automatically. A
re-pairing procedure is needed to establish connections again. Please repeat
pairing procedure listed above.
6. Connect ABT-SPK-A8 to PC or Notebook Computers with Bluetooth Capabilities.
(Please check if your PC or Notebook computers have Bluetooth ability or not. If not, you can purchase Advantek Networks
ABT-02U (USB Bluetooth Dongle) to make your computers Bluetooth compatible. Detail specification for ABT-02U can be
found on-line at: http://www.advanteknetworks.com/products/bluetooth/abt02u.html)
6.1 To play music via a Bluetooth connection with your computer, please make sure the
ABT-SPK-A Bluetooth Wireless Speaker has been paired with your PC or Notebook
computer. (Refer to Pairing and establish a connection section of this manual for
instructions for pairing.)
Note: The device did not support “remote control” function when connecting
with a Bluetooth AV Transmitter; button will act as “mute” function.
6.2 To play music via a Bluetooth USB Dongle, please complete AV pairing and then activate
intended audio player interface. When completed, the music will be transmitted to the
speaker automatically.
Note: The Bluetooth USB Dongle should support AVRCP profile to activate
