Advantech IPPC-8151S Series Manual de usuario

IPPC-8151S Series

15" XGA TFT LCD Celeron M

Fanless Industrial Panel PC with

Stainless Steel Chassis

User Manual

IPPC-8151S User Manual ii

The documentation and the software included with this product are copy-

righted 2009 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

Part No. 2003815100 1st Edition

Printed in Taiwan June 2009

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

IPPC-8151S User Manual iv

Declaration of Conformity

This product has passed the CE test for environmental specifications. Test

conditions for passing included the equipment being operated within an

industrial enclosure. In order to protect the product from being damaged

by ESD (Electrostatic Discharge) and EMI leakage, we strongly recom-

mend the use of CE-compliant industrial enclosure products.

FCC Class A

Note: This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful inter-

ference in which case the user will be required to correct the interference

at his own expense.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (OS, version, software, etc.)

- A complete description of the problem

- The exact wording of any error messages

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning.

Use a damp cloth. Do not use liquid or spray detergents for clean-

ing.

4. For plug-in equipment, the power outlet socket must be located

near the equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Drop-

ping it or letting it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before con-

necting the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or elec-

trical shock.

13. Never open the equipment. For safety reasons, the equipment

should be opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked

by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work

according to the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

IPPC-8151S User Manual vi

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

WHERE THE STORAGE TEMPERATURE MAY GO BELOW

-40° C OR ABOVE 85° C. THIS COULD DAMAGE THE

EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CON-

TROLLED ENVIRONMENT.

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the

products from damage.

1. To avoid electrical shock, always disconnect the power from your

PC chassis before you work on it. Don't touch any components on

the CPU card or other cards while the PC is on.

2. Disconnect power before making any configuration changes. The

sudden rush of power as you connect a jumper or install a card may

damage sensitive electronic components.

vii Table of Contents

Contents

Chapter 1 General Information ....................................... 2

1.1 Introduction ....................................................................... 2

1.2 Specifications .................................................................... 3

1.2.1 General ........................................................................... 3

1.2.3 LCD Specifications ........................................................ 4

1.3 I/O View............................................................................ 4

1.4 Dimensions........................................................................ 5

Chapter 2 System Setup.................................................... 8

2.2 Stand Kit............................................................................ 9

2.3 VESA Arm Kit.................................................................. 9

2.4 Install Panel Mount ......................................................... 10

2.5 Installing I/O Cables........................................................ 10

2.6 Install a 2.5" SATA HDD ............................................... 10

2.7 Installing a PCI Expansion Card ..................................... 11

2.8 Installing a Power Connector .......................................... 11

Chapter 3 I/O Connector & Setting Mode ................... 14

3.1 IPPC-8151S..................................................................... 14

3.1.1 COM1,COM3,COM4 : Serial port RS232 .................. 17

Chapter 4 Software Configuration ................................ 20

4.1 Overview ......................................................................... 20

4.2 Utilities and Drivers ........................................................ 20

4.2.1 Touchscreen Gesture Introduction ............................... 22

4.2.2 Touch Gesture Utility .................................................. 22

Appendix A WDT Programming ...................................... 26

A.1 Overview ......................................................................... 26

A.2 Watchdog Timer Programming....................................... 27

Table A.1:Watchdog Runtime Registers ..................... 27

A.3 Example Programs .......................................................... 28

IPPC-8151S User Manual viii

CHAPTER

General Information

Sections include:

• Introduction

• Specifications

• Dimensions

IPPC-8151S User Manual 2

Chapter 1 General Information

1.1 Introduction

The IPPC-8151S is designed with a fully sealed stainless steel enclosure

and uses a special tapered & food safe rubber seal between the bezel and

the touchscreen. This allows it to satisfy the stringent standards required

in food processing, clinical, chemical or pharmaceutical laboratories. Its

fully enclosed design without ventilation slots and external fans makes its

completely protected against splashed water, achieving a NEMA4 (IP66)

grade of protection.

IP66 Grade Protection

The IP66 rating guarantees waterproof and dustproof protection, ensuring

reliable operation in any hazardous environment. Front model to support

front IP66 protection grade. All-around model supports IP66 protection

grade for all sides including I/O

Anti-corrosive Chassis with Chemical Resistant Touchscreen

Stainless steel chassis' are a great fit for many industrial applications due

to their ability to minimize contamination and maintain strict hygienic

requirements. 316L stainless steel is more resistant to corrosion than 304,

and IP66 protection provides waterproof protection, making them easy to

clean or disinfect even with high pressure water. Furthermore the dust-

proof capabilities make them exceptionally suitable for applications in

hazardous environments. The FDA Food-Standard Sealing Materials

meet high hygienic requirements and the touchscreen is resistant to chem-

ical, detergents and disinfectants.

High Performance, Fanless Design

IPPC-8151S is equipped with a 15" LCD screen and a bright and sharp

display. The embedded Intel Celeron M 1GHz, 1MB L2 cache and 1GB

DDR2 memory satisfy most application computing needs. The fanless

design extends operation life, with enhanced anti-shock and anti-vibra-

tion properties suitable for harsh environments. Furthermore, with one

CompactFlash slot, one PCI expansion and one SATA HDD, IPPC-8151S

provides flexibility and meets high capacity demands.

Tabla de contenidos

Otros manuales de Panel táctil de Advantech

Advantech

Advantech POC-W211 Manual de instrucciones

Advantech

Advantech TPC-1250H Manual de usuario

Advantech

Advantech IPPC-6152A Manual de usuario

Advantech

Advantech PPC-6151C Manual de usuario

Advantech

Advantech PPC-3150SW-PN4A Manual de usuario

Advantech

Advantech UTC-W101E Manual de usuario

Advantech

Advantech SPC-821-6 Series Manual de usuario

Advantech

Advantech PPC-6121 Manual de usuario

Advantech

Advantech Intel XScale PXA Touch Panel Computer TPC-66... Manual de usuario

Advantech

Advantech PPC-3100-RE9A Manual de instalación y operación

Advantech

Advantech TPC-B610 Manual de usuario

Advantech

Advantech HMI-640S Manual de usuario

Advantech

Advantech PPC-L62T Manual de usuario

Advantech

Advantech PPC-612 Manual de usuario

Advantech

Advantech TPC-300 Elkhart Lake Series Manual de usuario

Advantech

Advantech PPC-310-RJ60A Manual de instalación y operación

Advantech

Advantech POC-174 Manual de usuario

Advantech

Advantech COASTIPC PPC-412 Manual de instalación y operación

Advantech

Advantech PPC-150T-RT Manual de usuario

Advantech

Advantech RUGGED PENTIUM IPPC-9120 Manual de usuario

Advantech

Advantech TPC-1270 Manual de usuario

Advantech

Advantech PPC-3150 Manual de usuario

Advantech

Advantech ITA-8100 Manual de usuario

Advantech

Advantech IPPC-5211WS Series Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

B&R Industries

B&R Industries MAPPC900-ENG Manual de usuario