Advantech PCI-1761 Manual de usuario

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

User Manual

PCI-1761

8-ch Relay & 8-ch Isolated

Digital Input PCI Card

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCI-1761 User Manual ii

The documentation and the software included with this product are copyrighted 2011

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. 2003176101 Edition 2

Printed in Taiwan April 2015

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

iii PCI-1761 User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from being damaged by ESD (Electrostatic Discharge)

and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-

sure products.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

Warnings, Cautions and Notes

Warning! Warnings indicate conditions, which if not observed, can cause personal

injury!

Caution! Cautions are included to help you avoid damaging hardware or losing

data. e.g.

There is a danger of a new battery exploding if it is incorrectly installed.

Do not attempt to recharge, force open, or heat the battery. Replace the

battery only with the same or equivalent type recommended by the man-

ufacturer. Discard used batteries according to the manufacturer's

instructions.

Note! Notes provide optional additional information.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCI-1761 User Manual iv

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

15. The power cord or plug is damaged.

16. Liquid has penetrated into the equipment.

17. The equipment has been exposed to moisture.

18. The equipment does not work well, or you cannot get it to work according to the

user's manual.

19. The equipment has been dropped and damaged.

20. The equipment has obvious signs of breakage.

21. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C

(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT

SHOULD BE IN A CONTROLLED ENVIRONMENT.

22. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

23. The sound pressure level at the operator's position according to IEC 704-1:1982

is no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

v PCI-1761 User Manual

Contents

Chapter 1 Overview...............................................1

1.1 Introduction ............................................................................................... 2

1.2 Features .................................................................................................... 2

1.3 Applications............................................................................................... 3

1.4 Installation Guide ...................................................................................... 3

Figure 1.1 Installation Flow Chart ................................................ 4

1.5 Software Overview .................................................................................... 4

1.6 Accessories............................................................................................... 5

Chapter 2 Installation............................................7

2.1 Unpacking ................................................................................................. 8

2.2 Switch and Jumper Settings...................................................................... 8

Figure 2.1 Card Connector, Jumper and Switch Locations ......... 8

Table 2.1: Summary of Jumper Settings ..................................... 8

Table 2.2: Board ID Setting (SW1) .............................................. 9

2.3 I/O Connectors ........................................................................................ 10

Figure 2.2 I/O Connector Pin Assignments ............................... 10

2.4 Hardware Installation .............................................................................. 11

2.5 Device Setup & Configuration ................................................................. 12

Chapter 3 Signal Connections ..........................13

3.1 Overview ................................................................................................. 14

3.2 Isolated Digital Input Connections........................................................... 14

Figure 3.1 Isolated Digital Input Connections ............................ 14

3.3 Relay Connections .................................................................................. 15

Figure 3.2 Relay Output Connection ......................................... 15

Appendix A Specifications ....................................17

A.1 Specifications .......................................................................................... 18

Table A.1: Isolated Digital Input ................................................. 18

Table A.2: Relay Output............................................................. 18

Table A.3: General Specifications.............................................. 19

Appendix B Block Diagram ...................................21

B.1 Block Diagram......................................................................................... 22

Appendix C Register Structure and Format......23

C.1 Overview ................................................................................................. 24

C.2 I/O Port Address Map.............................................................................. 24

Table C.1: Register Functions.................................................... 24

C.3 C.3 Relay I/O Registers - BASE+0H ...................................................... 25

Table C.2: Register for Relay Output Status.............................. 25

Table C.3: Register for Relay Output ......................................... 25

C.4 Isolated Digital Input Registers - BASE+1H ............................................ 25

C.5 Board ID - BASE+2H .............................................................................. 25

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCI-1761 User Manual vi

Table C.4: Register for Board ID................................................ 25

C.6 Interrupt Status Register - BASE+3H/4H/5H .......................................... 26

Table C.5: Register for Interrupt Status ..................................... 26

C.7 Interrupt Control Register - BASE+3H/4H/5H ......................................... 27

Table C.6: Register for Interrupt Control.................................... 27

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Chapter 1

1Overview

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCI-1761 User Manual 2

1.1 Introduction

Thank you for buying the Advantech PCI-1761. The Advantech PCI-1761 is a 8-

channel relay actuator and 8-channel isolated digital input card for the PCI bus. Its

eight on-board SPDT relays are ideal for applications such as device ON/OFF control

or small power switched. For easy monitoring, each relay is equipped with one red

LED to show its ON/OFF status.

The PCI-1761's eight optically-isolated digital input channels are ideal for digital input

in noisy environments or with floating potentials. The following sections of this chap-

ter will provide further information about features, installation guide, together with

some brief information on software and accessories for the PCI-1761 card.

1.2 Features

8 relay output channels and 8 isolated digital input channels

LED indicators to show activated relays

4 Form A-type and 4 Form C-type relay output channels

Output status read-back

Keep relay output values when hot system reset

High-voltage isolation on input channels (2,500 VDC)

High ESD protection (2,000 VDC)

High over-voltage protection (70 VDC)

Wide input range (10 ~ 50 VDC)

Interrupt handling capability

Board ID

The Advantech PCI-1761 offers the following main features:

Robust Protection

The PCI-1761 digital input channels feature a robust isolation protection for indus-

trial, lab and machinery automation applications. It durably withstands voltage up to

2,500 VDC, preventing your host system from any incidental harms. If connected to

an external input source with surge-protection, the PCI-1761 can offer up to a maxi-

mum of 2,000 VDC ESD (Electrostatic Discharge) protection. Even with an input volt-

age rising up to 70 VDC, the PCI-1761 can still manage to work properly albeit only

for short period of time.

Wide Input Range

The PCI-1761 has a wide range of input voltage from 10 to 50 VDC, and it is suitable

for most industrial applications with 12 VDC, 24 VDC and 48 VDC input voltage.

Reset Protection Fulfills Requirement for Industrial Applications

When the system has undergone a hot reset (i.e. without turning off the system

power), the PCI-1761 can either retain outputs values of each channel, or return to its

default configuration as open status, depending on its on-board jumper setting. This

function protects the system from wrong operations during unexpected system

resets.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

3 PCI-1761 User Manual

Chapter 1 Overview

Plug-and-Play Functionality

The PCI-1761 is a Plug-and-Play device, which fully complies with PCI Specification

Rev 2.2. During card installation, there is no need to set jumpers or DIP switches.

Instead, all bus-related configurations such as base I/O address and interrupt are

automatically done by the Plug-and-Play function.

Board ID

The PCI-1761 has a built-in DIP Switch that helps define each card's ID when multi-

ple PCI-1761 cards have been installed on the same PC chassis. The board ID set-

ting function is very useful when users build their system with multiple PCI-1761

cards. With correct Board ID settings, you can easily identify and access each card

during hardware configuration and software programming.

1.3 Applications

Industrial On/Off control

Switch status sensing

Digital I/O control

Industrial and lab automation

SMT/PCB machinery

Semi-conductor machinery

PC-based Industrial Machinery

Testing & Measurement

Laboratory & Education

External relay driving

1.4 Installation Guide

Before you install your PCI-1761 card, please make sure you have the following nec-

essary components:

PCI-1761 card

PCI-1761 User's Manual

Driver software - Advantech DLL drivers (included in the companion CD-ROM)

Wiring cable - PCL-10137 (optional)

Wiring board - ADAM-3937 (optional)

Personal computer or workstation with a PCI interface (running Windows 8

(desktop mode), 7 and XP)

Application software - DAQ Navi, LabView or other 3rd-party software

After you get the necessary components and maybe some of the accessories for

enhanced operation of your Multifunction card, you can then begin the Installation

procedures.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Otros manuales para PCI-1761

Tabla de contenidos

Otros manuales de Tarjeta PCI de Advantech

Advantech

Advantech PCLD-8811 Manual de instalación y operación

Advantech

Advantech MIC-3401 Manual de usuario

Advantech

Advantech PCI-1240 Manual de usuario

Advantech

Advantech PCA-5650 Manual de instalación y operación

Advantech

Advantech UNO-P166 Manual de instalación y operación

Advantech

Advantech PCI-1751U Manual de usuario

Advantech

Advantech PCI-1753 Manual de usuario

Advantech

Advantech RIO-3302 Manual de usuario

Advantech

Advantech DVP-7637HE Manual de usuario

Advantech

Advantech PCI-1750 Manual de usuario

Advantech

Advantech PCI-1671UP Manual de instalación y operación

Advantech

Advantech PCIE-1805 Manual de usuario

Advantech

Advantech DVP-7635HE Manual de usuario

Advantech

Advantech PCI-1723 Manual de usuario

Advantech

Advantech PCI-1710 Manual de usuario

Advantech

Advantech DSPC-8661-PCXE Manual de usuario

Advantech

Advantech PCI-1601 Manual de usuario

Advantech

Advantech PCA-6005-B Manual de usuario

Advantech

Advantech DVP-7020BE Manual de usuario

Advantech

Advantech PCE-3132 Manual de instalación y operación

Advantech

Advantech PCI-1752USO Manual de usuario

Advantech

Advantech PCI-1712 Manual de instalación y operación

Advantech

Advantech PCIE-1758 Series Manual de usuario

Advantech

Advantech PCI-1718 Series Manual de usuario

Manuales populares de Tarjeta PCI de otras marcas

ERMA

ERMA SSI 1417 Manual de usuario

SIIG

SIIG CyberSerial Dual PCI Instrucciones de montaje

Moxa Technologies

Moxa Technologies CP-102E Manual de usuario

I-Bus

I-Bus IBC2602 Manual de usuario

Exsys

Exsys EX-60102 Manual de usuario

Chelsio Communications

Chelsio Communications T5 Series Manual de usuario

Conrad Electronic

Conrad Electronic 97 46 71 Manual de usuario

Micro Innovations

Micro Innovations USB650A Manual de usuario

KTI Networks

KTI Networks KF-310 Manual de usuario

Asus

Asus SpaceLink WL230 Manual de usuario

SIIG

SIIG SC2475 Manual de usuario

TRENDnet

TRENDnet TEW-703PI Manual de usuario

Belkin

Belkin F5D7000F Manual de usuario

Pericom

Pericom PI7C7100 Manual de usuario

ADLINK Technology

ADLINK Technology cPCI-3548 Manual de usuario

Digium

Digium TE200 Series Manual de usuario

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manual de usuario

Western Digital

Western Digital FireWire PCI Adapter Manual de usuario