Advantech FPM-7000T Series Manual de usuario

User Manual

FPM-7000T Series

True-flat Industrial Monitor with

5-wire Resistive Touchscreen,

Direct-VGA/DP ports

FPM-7000T Series User Manual ii

The documentation and the software included with this product are copyrighted 2015

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

This Manual Covers the Following Models.

FPM-7061T-XXXX

FPM-7121T-XXXX

FPM-7151T-XXXX

Part No. xxxxxxxxxxxxx Edition 1

Printed in China September 2015

iii FPM-7000T Series User Manual

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

FPM-7000T Series User Manual iv

Declaration of Conformity

This device complies with part 15 of the FCC rules: Operation is subject to the follow-

ing two condition:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that

may cause undesired operation.

FCC Class A

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

v FPM-7000T Series User Manual

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well, or you cannot get it to work according to the

user's manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C

(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT

SHOULD BE IN A CONTROLLED ENVIRONMENT.

16. The sound pressure level at theoperator's position according to IEC 704-1:1982

is no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

FPM-7000T Series User Manual vi

vii FPM-7000T Series User Manual

Contents

Chapter 1 General Information ............................1

1.1 Introduction ...............................................................................................2

1.2 Specifications............................................................................................2

1.2.1 General.........................................................................................2

1.2.2 Touchscreen.................................................................................2

1.3 LCD Specification......................................................................................3

1.4 Power Consumption..................................................................................4

1.5 Connectors................................................................................................4

1.6 Dimensions ...............................................................................................5

Figure 1.1 FPM-7061T Dimensions.............................................5

Figure 1.2 FPM-7121T Dimensions.............................................6

Figure 1.3 FPM-7151T Dimensions.............................................7

1.7 Power Connector Bracket .........................................................................8

Chapter 2 Mounting ..............................................9

2.1 Mounting the Monitor ..............................................................................10

2.1.1 Wall Mounting with FPM-1000T-SMKE ......................................10

Figure 2.1 Wall Mounting...........................................................10

2.1.2 Panel Mounting...........................................................................11

2.1.3 VESA Mount for FPM-7000T......................................................12

Figure 2.2 Desktop Stand..........................................................12

Figure 2.3 VESA mount for FPM-7061T....................................13

Figure 2.4 VESA 100 mount for FPM-7121T/7151T..................14

Figure 2.5 VESA 75 mount for FPM-7121T/7151T....................14

Appendix A OSD Operation Keypad.......................1

A.1 OSD Board Overview (FPM-71x1T)..........................................................2

A.1.1 OSD Key Functions ......................................................................2

A.2 OSD Board Overview (FPM-7061T) .........................................................8

A.2.1 OSD Key Functions ......................................................................9

A.3 Installing Drivers for Windows OS...........................................................13

Appendix B Setting Serial Data for Expansion....15

B.1 Setting Serial Data for Expansion...........................................................16

B.2 Touch screen RS232 Connector Pin Definition.......................................17

FPM-7000T Series User Manual viii

Chapter 1

1General Information

Sections include:

Introduction

Specifications

LCD Specification

Power Consumption

Connectors

Dimensions

FPM-7000T Series User Manual 2

1.1 Introduction

Advantech's FPM-7000T is a true-flat TFT LCD flat panel monitor built specifically for

industrial applications. With the its touchscreen, FPM-7000T is an excellent and

user-friendly system control interface.

In addition to its usual application as an LCD panel monitor, FPM-7000T comes

standard with direct VGA/DP signal inputs, making it compatible with Industrial PCs

and Workstations. Its OSD (On rear cover) function allows you to adjust display fac-

tors such as brightness, contrast, colours and VGA signal information. Functions that

are more and more critical as HMI users become aware of the benefits of flat panel

monitors. The rear cover is of SECC steel, and the front panel is of die-cast magne-

sium alloy with IP66 certification.

With a new system design, this monitor can support operating temperatures from -20

~ 60°C for a variety of environments. Designed with various mounting methods for

users to apply into the system or adopt to the environment easily.

1.2 Specifications

1.2.1 General

Construction: Die-cast Magnesium alloy front bezel and SECC rear cover

Front panel: IP66 certified

Control: OSD control pad on rear

Mounting: Panel, wall, desktop, VESA

Dimensions (W x H x D):

–FPM-7061T: 199.0 x 152.0 x 46.10 mm

–FPM-7121T: 311.8 x 238 x 44.5 mm

–FPM-7151T: 383.2 x 307.3 x 48.0 mm

Weight:

–FPM-7061T: 1.2 kg

–FPM-7121T: 2.6 kg

–FPM-7151T: 4.2 kg

1.2.2 Touchscreen

Type: 5-wire Resistive Touch

Controller:

–USB interface for FPM-7061T

–USB & RS-232 interface for FPM-7121T & FPM-7151T

OS Support: Microsoft® Windows XP, Vista,7,8, and Linux

Linux support version please check PenMount Website:

http://www.penmount.com/down_2_1.php

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor industrial de Advantech

Advantech

Advantech EPD Series Manual de usuario

Advantech

Advantech IDK-1115WP Series Manual de usuario

Advantech

Advantech FPM-5151G Series Manual de usuario

Advantech

Advantech FPM-7181W Series Manual de usuario

Advantech

Advantech IDS31-320W Manual de usuario

Advantech

Advantech IDS-3112 Series Manual de usuario

Advantech

Advantech FPM-7151W Series Manual de usuario

Advantech

Advantech FPM-7211W Series Manual de usuario

Advantech

Advantech IDS-3219 Series Manual de usuario

Advantech

Advantech FPM-2120G Series Manual de usuario

Advantech

Advantech IDS-3319 Series Manual de usuario

Advantech

Advantech IDK-1115WP-45FHA1 Manual de usuario

Advantech

Advantech FPM-3060G Series Manual de usuario

Advantech

Advantech FPM-3190 Series Manual de usuario

Advantech

Advantech FPM-5171G Series Manual de usuario

Advantech

Advantech IDK-1121WP Series Manual de usuario

Advantech

Advantech FPM-3190G Series Manual de usuario

Advantech

Advantech FPM-3150G Series Manual de usuario

Advantech

Advantech FPM-212 Series Manual de usuario

Advantech

Advantech FPM-212 Series Manual de usuario

Advantech

Advantech FPM-3191G Series Manual de usuario

Advantech

Advantech IDS-3315 Series Manual de usuario

Manuales populares de Monitor industrial de otras marcas

JUMO

JUMO mTRON T Manual de usuario

SWEDX

SWEDX SWSS156 Manual de usuario

Saia

Saia PCD7.D410VTCF Manual de usuario

weintek

weintek EasyView MT-608S Manual de usuario

Austin Hughes

Austin Hughes RP-F821 Manual de usuario

WAGO

WAGO WAGO-PERSPECTO 762 Series Guía del producto

HIS

HIS HIS-ML12-Series D Manual de usuario

Acnodes

Acnodes APH 8064 Manual de usuario

Acnodes

Acnodes APW 5400 Manual de usuario

Dynamic Displays

Dynamic Displays QES1500 Progressive Series Manual de usuario

AXIOMTEK

AXIOMTEK Dk3g4PANEL 6153-O/P Manual de usuario

ESA

ESA XM7W7 Manual de usuario

Siemens

Siemens SIMATIC Industrial Flat Panel IFP2200 Manual de usuario

Siemens

Siemens INOX PRO SIMATIC IFP1900 Guía del administrador

Eaton

Eaton XV-152 Series Manual de usuario

bon

bon BSM-153H Manual de usuario

Bartec

Bartec Polaris Remote 15" Manual de usuario

Texas Instruments

Texas Instruments Stellaris IDM-L35 Manual de usuario