ADTRAN T3SU 300 Manual de usuario

T3SU 300 User Manual

61202217L1-1B

June 2004

1202217L1 DC Version Including AC Mains Power Supply

1200218L1 HSSI DTE Interface Card

1200219L1 V.35 DTE Interface Card

1200284L1 Quad DSX-1 Interface Card

1200655L1 Quad Bridge Module

1202217L2 AC Version

1202217L4 DC Version

2 T3SU 300 User Manual 61202217L1-1B

Trademark Information:

OpenView is a trademark of Hewlett-Packard Company.

Spectrum is a registered trademark of Cabletron.

Netview is a registered trademark of IBM.

901 Explorer Boulevard

P.O. Box 140000

Huntsville, AL 35814-4000

(256) 963-8000

Printed in U.S.A.

61202217L1-1B T3SU 300 User Manual 3

About this Manual

This manual is arranged so you can quickly and easily find the information you need.

The following is an overview of the contents of this manual:

• Chapter 1, Introduction, familiarizes you with fiber networks and T3SU 300

highlights and gives a brief explanation of the option cards that may be purchased

for use with the T3SU 300.

• Chapter 2, Installation and Operation, describes the T3SU 300 connectors (pin

assignments are given in Appendix A), provides installation instructions, and

explains how to operate your T3SU 300 using the terminal interface.

• Chapter 3, Configuration, explains how to access the T3SU 300 Configuration

menu, describes selections made in the Configuration menus, and provides a

menu tree of Configuration options.

• Chapter 4, Status, describes each field of the Status menu.

• Chapter 5, Statistics, explains how to access statistical information for the T3SU

300 and describes each field.

• Chapter 6, Diagnostics, explains how to diagnose problems using loopback and

BERT tests.

• Appendix A provides pinouts for the T3SU 300 connectors.

• Appendix B contains product specifications.

• Appendix C lists the acronyms and abbreviations used in this document.

• Appendix D is a glossary.

4 T3SU 300 User Manual 61202217L1-1B

Safety Instructions

When using your telephone equipment, please follow these basic safety precautions

to reduce the risk of fire, electrical shock, or personal injury:

1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool.

2. Avoid using a telephone (other than a cordless-type) during an electrical storm.

There is a remote risk of shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord, power supply, and/or batteries indicated in the manual.

Do not dispose of batteries in a fire. They may explode. Check with local codes for

special disposal instructions.

Save These Important Safety Instructions

Notes provide additional useful information.

Cautions signify information that could prevent service interruption.

Warnings provide information that could prevent damage to the

equipment or endangerment to human life.

61202217L1-1B T3SU 300 User Manual 5

Affidavit Requirements for Connection to Digital Services

• An affidavit is required to be given to the telephone company whenever digital

terminal equipment without encoded analog content and billing protection is used

to transmit digital signals containing encoded analog content which are intended

for eventual conversion into voiceband analog signals and transmitted on the

network.

• The affidavit shall affirm that either no encoded analog content or billing

information is being transmitted or that the output of the device meets Part 68

encoded analog content or billing protection specifications.

• End user/customer will be responsible for filing an affidavit with the local

exchangecarrierwhenconnectingunprotectedcustomerpremiseequipment(CPE)

to 1.544 Mbps or subrate digital services.

Until such time as subrate digital terminal equipment is registered for voice

applications, the affidavit requirement for subrate services is waived.

6 T3SU 300 User Manual 61202217L1-1B

Affidavit for Connection of Customer Premises Equipment

to 1.544 Mbps and/or Subrate Digital Services

For the work to be performed in the certified territory of ___________________

(telco name)

State of ________________

County of ________________

I, _______________________ (name), ____________________________________

(business address),

____________________ (telephone number) being duly sworn, state:

I have responsibility for the operation and maintenance of the terminal

equipment to be connected to 1.544 Mbps and/or ________ subrate digital

services. The terminal equipment to be connected complies with Part 68 of the

FCC rules except for the encoded analog content and billing protection

specifications. With respect to encoded analog content and billing protection:

( ) I attest that all operations associated with the establishment, maintenance, and

adjustment of the digital CPE with respect to analog content and encoded billing

protection information continuously complies with Part 68 of the FCC Rules and

Regulations.

( ) The digital CPE does not transmit digital signals containing encoded analog

content or billing information which is intended to be decoded within the

telecommunications network.

( ) The encoded analog content and billing protection is factory set and is not under

the control of the customer.

I attest that the operator(s)/maintainer(s) of the digital CPE responsible for the

establishment, maintenance, and adjustment of the encoded analog content and

billing information has (have) been trained to perform these functions by

successfully having completed one of the following (check appropriate blocks):

61202217L1-1B T3SU 300 User Manual 7

( ) A training course provided by the manufacturer/grantee of the equipment used to

encode analog signals; or

( ) A training course provided by the customer or authorized representative, using

training materials and instructions provided by the manufacturer/grantee of the

equipment used to encode analog signals; or

( ) An independent training course (e.g., trade school or technical institution)

recognized by the manufacturer/grantee of the equipment used to encode analog

signals; or

( ) In lieu of the preceding training requirements, the operator(s)/maintainer(s) is

(are) under the control of a supervisor trained in accordance with _________

(circle one) above.

I agree to provide ______________________ (telco’s name) with proper

documentation to demonstrate compliance with the information as provided in

the preceding paragraph, if so requested.

_________________________________Signature

_________________________________Title

_________________________________ Date

Transcribed and sworn to before me

This ________ day of _______________, _______

_________________________________

Notary Public

My commission expires:

_________________________________

8 T3SU 300 User Manual 61202217L1-1B

FCC regulations require that the following information be provided in this manual:

1. This equipment complies with Part 68 of FCC rules. On the back of the equipment

housing is a label showing the FCC registration number and ringer equivalence

number (REN). If requested, provide this information to the telephone company.

2. If this equipment causes harm to the telephone network, the telephone company

may temporarily discontinue service. If possible, advance notification is given;

otherwise, notification is given as soon as possible. The telephone company will

advise the customer of the right to file a complaint with the FCC.

3. The telephone company may make changes in its facilities, equipment,

operations, or procedures that could affect the proper operation of this

equipment. Advance notification and the opportunity to maintain uninterrupted

service are given.

4. If experiencing difficulty with this equipment, please contact ADTRAN for repair

and warranty information. The telephone company may require this equipment

to be disconnected from the network until the problem is corrected or it is certain

the equipment is not malfunctioning.

5. This unit contains no user-serviceable parts.

6. An FCC compliant telephone cord with a modular plug is provided with this

equipment. This equipment is designed to be connected to the telephone network

or premises wiring using an FCC compatible modular jack, which is Part 68

compliant.

7. The following information may be required when applying to the local telephone

company for a dial-up line for the V.34 modem:

8. The REN is useful in determining the quantity of devices you may connect to

your telephone line and still have all of those devices ring when your number is

called. In most areas, the sum of the RENs of all devices should not exceed five. To

be certain of the number of devices you may connect to your line as determined

by the REN, call your telephone company to determine the maximum REN for

your calling area.

Service Type REN FIC USOC

1.544 Mbps - SF 04DU9-BN 6.0N RJ-48C

1.544 Mbps - SF and B8ZS 04DU9-DN 6.0N RJ-48C

1.544 Mbps - ESF 04DU9-1KN 6.0N RJ-48C

1.544 Mbps - ESF and B8ZS 04DU9-1SN 6.0N RJ-48C

61202217L1-1B T3SU 300 User Manual 9

9. This equipment may not be used on coin service provided by the telephone

company. Connection to party lines is subject to state tariffs. Contact your state

public utility commission or corporation commission for information.

10 T3SU 300 User Manual 61202217L1-1B

Federal Communications Commission Radio Frequency

Interference Statement

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio frequencies. Operation of

this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

Shielded cables must be used with this unit to ensure compliance with

Class A FCC limits.

Changes or modifications to this unit not expressly approved by

the party responsible for compliance could void the user’s

authority to operate the equipment.

Otros manuales para T3SU 300

Tabla de contenidos

Otros manuales de Multiplexor de ADTRAN

ADTRAN

ADTRAN TSU 600 Instrucciones de instalación

ADTRAN

ADTRAN MX3216 Manual de usuario

ADTRAN

ADTRAN OPTI-6100 LMX Manual de usuario

ADTRAN

ADTRAN Total Access 3000 Manual de instrucciones

ADTRAN

ADTRAN ISU 512 Manual de usuario

ADTRAN

ADTRAN TSU 120 Manual de usuario

ADTRAN

ADTRAN TOTAL ACCESS MX2800 Manual de usuario

ADTRAN

ADTRAN MX2820 Guía del usuario

ADTRAN

ADTRAN MX2800 STS-1 Instrucciones de instalación

ADTRAN

ADTRAN ISU 512E Manual de usuario

ADTRAN

ADTRAN 1202076L1 Manual de usuario

ADTRAN

ADTRAN OPTI-6100 LMX Manual de usuario

ADTRAN

ADTRAN MX2820 M13 MUX Manual del propietario

ADTRAN

ADTRAN Total Access 1248 Manual de instrucciones

ADTRAN

ADTRAN Total Access OC-3 L3 Manual de instrucciones

ADTRAN

ADTRAN TSU 610 Manual de usuario

ADTRAN

ADTRAN MX2800 M13 Manual de usuario

ADTRAN

ADTRAN 1200287L1 Manual de usuario

ADTRAN

ADTRAN TDU 120e Manual de usuario

ADTRAN

ADTRAN OC-3 Instrucciones de instalación

ADTRAN

ADTRAN Frameport 768 Manual de usuario

ADTRAN

ADTRAN TSU LT Manual de usuario

ADTRAN

ADTRAN T3SU 300 Manual de usuario

ADTRAN

ADTRAN 1200 Manual de usuario

Manuales populares de Multiplexor de otras marcas

Campbell

Campbell AM416 Manual de usuario

Paradyne

Paradyne SIM2000 Manual de usuario

Panasonic

Panasonic WJFS616 - SWITCHER Manual de usuario

Lanex

Lanex TM-77 Manual de usuario

Bosch

Bosch VSS8394/01T Manual de usuario

Quark-Elec

Quark-Elec QK-A035 Manual de usuario

Elo TouchSystems

Elo TouchSystems E247 Manual de usuario

Paradyne

Paradyne Hotwire 8786 Manual de usuario

RFL Electronics

RFL Electronics 9508D UCC Manual de usuario

Miranda

Miranda AMX-101i Manual de instrucciones

ShipModul

ShipModul MiniPlex-AIX NMEA-0183 Manual de usuario

GE StoreSafe SDVR-10 Manual de usuario

Pickering

Pickering 40-613 Manual de usuario

Pickering

Pickering 40-667C Manual de usuario

American Fibertek

American Fibertek MTX-8410C Manual de usuario

ADC

ADC HiGain ELU-319 5E Manual de usuario

Paradyne

Paradyne Hotwire 8774 Manual de usuario

American Fibertek

American Fibertek MTX-8810C-SL Manual de usuario