ADT Pulse RC8326 Manual de usuario

ADT Pulse

Interactive Solutions

RC8326

Wireless Indoor Day/Night HD Camera

Quick Installation Guide

RC8326 Wireless Indoor Day/Night HD Camera Installation Guide

Table of Contents

CHAPTER 1 INTRODUCTION ............................................................................ 3

Overview............................................................................................................... 3

Physical Details ................................................................................................... 4

Package Contents............................................................................................... 6

CHAPTER 2 BASIC SETUP................................................................................. 7

Installation............................................................................................................ 7

CHAPTER 3 ADT PULSE ENROLLMENT ......................................................... 9

Using WPS with PIN to Enroll the Camera .................................................... 9

Smart IR Function .............................................................................................14

If the Camera Continually Goes Offline ........................................................14

CHAPTER 4 WALL MOUNTING ......................................................................15

APPENDIX A SPECIFICATIONS ......................................................................17

RC8326 Wireless Day/Night HD Camera....................................................17

Regulatory Approvals ......................................................................................18

Property of ADT, LLC. Information accurate as of published date and is provided “as is”

without warranty of any kind.

ADT.ASAP and the product/service names listed in this document are marks and/or

registered marks. Unauthorized use is strictly prohibited.

RC8326-QIG-01 (03/17)

RC8326 Wireless Indoor Day/Night HD Camera Installation Guide

Chapter 1

Introduction

This section provides information about the RC8326 HD Camera's

features, components and capabilities.

Overview

The RC8326 is a true day/night wireless camera with HD resolution, 802.11n

Wi-Fi connectivity and Wi-Fi Protected Setup (WPS) support. This camera is

intended for use with ADT Pulse®.

Features

•Standalone Design. The wireless HD camera is a standalone system

with built-in CPU and video encoder. It requires only a power source and

a connection to the ADT Pulse gateway.

•Dual Video Support. The RC8326 supports H.264 and MJEPG video

compression.

Wireless Features

•Supports 802.11n Wireless Standard. The 802.11n standard

provides backward compatibility with the 802.11b and g standards.

•Supports WPS. Wi-Fi Protected Setup (WPS) can simplify the process

of connecting the wireless HD camera to the wireless network by using

the push button configuration.

•Wired Network. The RC8326 connects to the Pulse network

wirelessly.

Chapter 1 Introduction

RC8326 Wireless Indoor Day/Night HD Camera Installation Guide

Physical Details

Front

Figure 1: Front Panel

Light

Sensor

This is a hardware sensor to detect lux.

Lens

The lens cannot be adjusted. Please ensure that the lens

cover remains clean. The image quality is degraded if the

lens cover is dirty or smudged.

Rear

Figure 2: Rear Panel

Light

Sensor

Lens

WPS/Reset Button

Network/WPS LED

DC Power Jack

Power LED

Chapter 1 Introduction

RC8326 Wireless Indoor Day/Night HD Camera Installation Guide

Network/WPS

LED

(Green, Amber)

Off. Wireless network is not connected or camera is

not sending/receiving data.

On (Green).Wireless network connection is

available.

Blinking (Green).Data is being transmitted or

received via the wireless connection.

On (Amber).If the LED is on for 5 seconds and then

turns off, the WPS function has failed.

Blinking (Amber).The WPS connection is

processing.

Power LED

(Green)

Off. No power.

On.Power on. Power on. Also, prior to enrollment,

indicates start up mode (approximately 1 minute).

Blinking.Prior to enrollment, the Power LED blinks

after start up to indicate no network.

DC Power

Input

Connect the supplied 12V power adapter here. Do

not use other power adapters; doing so may damage

the camera.

WPS/Reset

Button

This button serves two functions on the camera.

•WPS PIN Code Mode. When pressed and held

for 5 seconds during the Pulse enrollment

process, the camera creates an encryption-

secured wireless connection.

•Reset. When pressed and held over 15 seconds,

the camera reboots and the settings are restored

to default values.

Chapter 1 Introduction

RC8326 Wireless Indoor Day/Night HD Camera Installation Guide

Package Contents

The following items are included in the package.

Figure 3: What’s in the Box

Camera

Stand

Screws /

Anchors (x2)

Power Adapter

RC8326 Wireless Indoor Day/Night HD Camera Installation Guide

Chapter 2

Basic Setup

This section provides information on how to assemble and configure the

RC8326 HD Camera for enrollment.

Installation

1. Assemble the Camera

Temporarily locate the camera close to the enrollment computer and

attach the Camera Stand to the camera.

2. Power Up

Connect the supplied 12V power adapter to the camera and power up.

Use only the power adapter provided. Using a different one may cause

hardware damage.

CAUTION: Use only the power adapter provided. Using a

different one can result in hardware damage.

Figure 4: Power Connection

The Power LED lights up solid green during startup, which takes about

one minute. After startup is completed, and prior to enrollment, the

Power LED blinks green.

Chapter 2 Basic Setup

RC8326 Wireless Indoor Day/Night HD Camera Installation Guide

4. Check the LEDs

•Power LED. The Power LED lights up solid green during startup,

which takes about one minute. After startup is completed, and prior

to enrollment, the Power LED blinks green.

•Network/WPS LED. At power up, the Network/WPS LED is off.

(The Network/WPS LED will flash amber when the camera attempts

to connect wirelessly to the gateway. The Network/WPS LED will

turn solid green when the wireless connection is successful.)

5. Enroll the Camera in ADT Pulse

This process is described in the next chapter, ADT Pulse Enrollment.

6. Mount the Camera

Place the camera in its final permanent location near a power source.

For mounting on a wall using the mounting plate, see Chapter 4 Wall

Mounting.

SD Card Slot (Future Enhancement)

On the side of the camera is a small plate held in place with a retaining

screw. Beneath this cover is a SD card slot that will be used in a future

software release.

Note: As the SD card slot is not functional at this time, please do not

remove this protective cover.

Figure 5: Future SD Card Slot Location

RC8326 Wireless Indoor Day/Night HD Camera Installation Guide

Chapter 3

ADT Pulse Enrollment

This section provides instructions for wirelessly enrolling the RC8326 HD

Camera into the ADT Pulse network. This process uses the Wi-Fi Protected

Setup (WPS) with PIN method to wirelessly enroll the camera to the

gateway via the ADT Pulse Portal or TS Installer App.

Using WPS with PIN to Enroll the Camera

1. Set up the camera, as described in Chapter 2.

2. Launch an Internet browser and log in to the Pulse portal or TS installer

app.

3. Enter the Manage Devices screen using one of these methods:

•For the Pulse portal, select the System tab and click Manage

Devices.

•For the TS installer app, click the Pulse Devices link.

The Manage Devices screen displays.

4. In the Manage Devices screen, click Cameras.

5. Click the Add Using WPS button at the bottom of the screen.

Chapter 3 ADT Pulse Enrollment

RC8326 Wireless Indoor Day/Night HD Camera Installation Guide

6. Locate the PIN number located on the label on the rear of the camera.

7. On the Add Camera Using WPS screen, enter the PIN number in the

WPS PIN field.

8. Ensure that the camera is powered on and that the Power LED is

flashing green.

9. Click the Continue button to initiate the WPS process.

Tabla de contenidos

Otros manuales de Cámara IP de ADT Pulse

ADT Pulse

ADT Pulse RC8025 Manual de usuario

ADT Pulse

ADT Pulse RC8021W-ADT Manual de usuario

ADT Pulse

ADT Pulse RC8325-ADT Manual de usuario

ADT Pulse

ADT Pulse DBC835 Manual de usuario

ADT Pulse

ADT Pulse OC835-ADT Manual de usuario

ADT Pulse

ADT Pulse iCamera-1000 Manual de usuario

Manuales populares de Cámara IP de otras marcas

FLIR

FLIR Exx series Manual de usuario

Avigilon

Avigilon H4A-BO1-IR Manual de usuario

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manual de usuario

ShareTech

ShareTech AV1 Manual de usuario

Ezviz

Ezviz C6C Manual de usuario

Melchioni

Melchioni UCAM 2015 Manual de usuario

Geutebruck

Geutebruck G-Cam/ESD-4630 Manual de usuario

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manual de usuario

Mitel

Mitel 6800i Series Manual de servicio

Vitek

Vitek VTC-IR403-212NP Manual de usuario

THOMSON

THOMSON DSC - 323W Manual de usuario

AVer

AVer FB2027 Manual de usuario

ENFORCER

ENFORCER EV-T5105-N2SQ Manual de usuario

Wansview

Wansview NC543 Manual de usuario

Eneo

Eneo MCB-64A0003M0A Manual de usuario

deView electronics

deView electronics CBDNI36F Manual de usuario

Swann

Swann SwannEye Manual de usuario

LevelOne

LevelOne IP CamSecure Manual de usuario