MES9000 series −Instruction manual v1.1 3
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
Contents
1 General information about documentation...............................................................................5
1.1 General information 5
1.2 Explanation of safety instructions 5
1.2.1 Structure of safety instructions 5
1.2.2 Explanation of signal words 6
1.3 Relevant device documentation 7
1.4 Symbols 7
1.5 Data, figures and modifications 7
1.6 Trademarks 8
1.7 Copyright 8
2 General device information ......................................................................................................9
2.1 Manufacturer and contact details 9
2.2 Intended use 9
2.3 Improper use 10
2.4 Environmental conditions 11
2.4.1 Vibration/shock resistance 12
2.5 Conformity 13
2.6 Warranty / repairs 14
2.7 Limitation of liability 14
2.8 Treatment and disposal of batteries 15
3 Scope of delivery....................................................................................................................16
4 Mechanical installation ..........................................................................................................17
4.1 Requirements 17
4.2 Attaching to a VESA 100 interface 17
4.3 Attaching using a tube adapter 18
4.4 Attaching the IP65 kit 22
4.4.1 Dimensions of the grommets 22
4.4.2 Dimensions of the retainer 23
4.4.3 Attaching the grommets 23
4.5 Attaching accessories 25
5 Electrical connections.............................................................................................................26
5.1 Requirements 26
5.2 Earthing concept 27
5.3 Interfaces 28
5.3.1 Overview of the rear side (service slot) 28
5.3.2 Overview of the front side 29
5.3.3 Devices with 24 VDC power supply 30
5.3.4 Devices with an AC voltage supply 30
5.3.5 Digital input and output on 24-VDC devices 31
5.3.6 Digital input on AC devices 31
5.4 Maximum cable lengths 32
