ADJ Design Series Manual de usuario
Design Series
DS4T
User Guide
ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, Netherlands
2
©2018 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions
herein are subject to change without notice. ADJ Products, LLC logo, and identifying product names and
numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and
matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter
granted. Product names used in this document may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged. All non-ADJ Products, LLC brands and product names are
trademarks or registered trademarks of their respective companies.
ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment,
building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with
the use or reliance of any information contained within this document, and/or as a result of the improper,
unsafe, insufficient, and negligent assembly, installation, rigging, and operation of this product.
ADJ PRODUCTS LLC USA
6122 S. Eastern Ave. Los Angeles, CA. 90040
ADJ SUPPLY Europe B.V
Junostraat 2 6468 EW Kerkrade, The Netherlands
+31 (0)45 546 85 00 | Fax +31 45 546 85 99 | www.adj.eu | [email protected]
ADJ PRODUCTS GROUP Mexico
AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000
+52 (728) 282-7070
DOCUMENT VERSION
Please check www.adj.com for the latest revision/update of this guide.
Date
Document
Version
Notes
09/06/18
1
Initial release
11/26/19
1.5
Update specifications
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the environment. Please turn off all electrical
products when they are not in use. To avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, Netherlands
3
CONTENTS
General Information
4
Limited Warranty (USA Only)
5
Safety Guidelines
6
Maintenance Guidelines
8
Panel Overview
9
Handling and Transportation
12
Installation
13
Technical Specifications
16
Optional Components & Accessories
18
ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, Netherlands
4
GENERAL INFORMATION
The DS4T LED Video Panels and connectors are composed of lightweight nanocomposite materials
(nanotechnology polymer), and feature multiple rigging points to connect panels in conventional,
offset, or staggered (3D) configurations. This innovative system can easily be linked, rigged, and
transported using numerous accessories. An injection molded unibody construction comprises the
integral aluminum alloy heatsink and power supply, which significantly improves heat dissipation. And
because of its high refresh rate, up to 3840Hz, images displayed on the LED Video Panel can be
photographed flicker free. With an expansive screen size potential, high brightness, and curved
installation options, our DS4T LED Video Panels allow manifold applications for stage, exhibitions,
shows, and commercial advertising.
ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, Netherlands
5
LIMITED WARRANTY (USA ONLY)
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of
manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific
warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of
America, including possessions and territories. It is the owner’s responsibility to establish the date and place of
purchase by acceptable evidence, at the time service is sought.
B. For warranty service, you must obtain a Return Authorization number (RA#) before sending the product back—
please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products,
LLC factory. All shipping charges must be prepaid. If the requested repairs or service (including parts replacement)
are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point
within the United States. If the entire instrument is sent, it must be shipped in its original package and packaging
material. No accessories should be shipped with the product. If any accessories are shipped with the product, ADJ
Products, LLC shall incur no liability whatsoever for loss of or damage to any such accessories, nor for the safe
return thereof.
C. This warranty is void if the product serial number and/or labels are altered or removed; if the product is modified in
any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product
has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization
was issued to purchaser by ADJ Products, LLC; if the product is damaged because it was not properly maintained as
set forth in the product instructions, guidelines and/or user manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning, or periodic checkup. During
the period specified above, ADJ Products, LLC will replace defective parts at its expense with new or refurbished
parts, and will absorb all expenses for warranty service and repair labor by reason of defects in material or
workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the
product, or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by
this warranty were manufactured after August 15, 2012, and bear identifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any
obligation to include these changes in any products theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products
described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products,
LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the
warranty period set forth above. And all warranties, whether expressed or implied, including warranties of
merchantability or fitness, are limited in duration to the warranty period set forth above. The consumer’s and/or
dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no
circumstances shall ADJ Product, LLC be liable for any loss and/or damage, direct and/or consequential arising out
of the use of, and/or inability to use this product.
G. This warranty is the only written warranty applicable to ADJ Products, LLC products, and supersedes all prior
warranties and written descriptions of warranty terms and conditions heretofore published.
MANUFACTURER’S LIMITED WARRANTY PERIODS:
Non-LED Lighting Products = 1-Year (365 Days) (Including Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog
Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands, Power/Data Distribution, etc. excluding LED and lamps)
Laser Products = 1-Year (365 Days) (excluding laser diodes which have a 6-Month Limited Warranty)
LED Products = 2-Year (730 Days) (excluding batteries which have a 180 Day Limited Warranty)
NOTE: 2-Year (730 Days) Limited Warranty ONLY applies to product purchased within the United States.
StarTec Series = 1-Year (365 Days) (excluding batteries which have a 180 Day Limited Warranty)
ADJ DMX Controllers = 2 Year (730 Days)
American Audio Products = 1 Year (365 Days)
CUSTOMER SUPPORT INFORMATION
Contact ADJ Service for any product related service and support needs.
Also visit forums.adj.com with questions, comments or suggestions.
ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, Netherlands
6
SAFETY GUIDELINES
This panel is a sophisticated piece of electronic equipment. To guarantee a smooth operation, it is
important to follow all instructions and guidelines in this manual. ADJ is not responsible for injury
and/or damages resulting from the misuse of this panel due to the disregard of the information printed
in this manual. Only qualified and/or certified personnel should perform the installation of this panel
and all included and/or rigging accessories. Only the original included rigging parts and/or rigging
accessories for this panel should be used for proper installation. Any modifications to the panel,
included and/or rigging accessories will void the original manufactures warranty and increase the risk
of damage and/or personal injury.
PROTECTION CLASS 1 - PANEL MUST BE PROPERLY GROUNDED
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS PANEL.
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR
MANUFACTURES WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO
THIS PANEL AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND
GUIDELINES IN THIS MANUAL VOID THE MANUFACTURES WARRANTY AND ARE
NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS. DO NOT PLUG
PANEL INTO A DIMMER PACK! NEVER OPEN THIS PANEL WHILE IN USE! UNPLUG
POWER BEFORE SERVICING PANEL! NEVER TOUCH FRONT OF PANEL DURING
OPERATION, AS IT MAY BE HOT! KEEP FLAMMABLE MATERIALS AWAY FROM
PANEL.
INDOOR / DRY LOCATIONS USE ONLY!
DO NOT EXPOSE PANEL TO RAIN AND/OR MOISTURE!
DO NOT SPILL WATER AND/OR LIQUIDS ON OR INTO THE PANEL!
DO NOT touch panel housing during operation. Turn OFF power and allow approximately 15 minutes
for panel to cool down before serving.
DO NOT: Operate a panel if any cover is open and/or removed.
DO NOT shake panel, avoid brute force when installing and/or operating panel.
DO NOT: Expose any part of the panel to open flame or smoke. Keep panel away from heat sources
such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
DO NOT: Install/use panel in extreme hot/humid environments, or handle without ESD precautions.
DO NOT: Exceed an operation temperature of 40°C (104°F), doing so will damage the panel.
DO NOT operate panel if power cord is frayed, crimped, damaged and/or if any of the power cord
connectors are damaged and do not insert into the panel securely with ease. NEVER force a power
cord connector into the panel. If the power cord or any of its connectors are damaged, replace it
immediately with a new one of similar power rating.
DO NOT block air ventilation slots/vents. All fan and air inlets must remain clean and never blocked.
Allow approximately 6” (15cm) between panel and other devices or a wall for proper cooling.
ALWAYS disconnect panel from main power source before performing any type of service and/or
cleaning procedure. Only handle the power cord by the plug end, never pull out the plug by tugging the
wire portion of the cord.
ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, Netherlands
7
SAFETY GUIDELINES
ONLY use the original packaging materials and/or case to transport the panel in for service.
PLEASE recycle shipping boxes and packaging whenever possible.
CAUTION: To avoid physical damage, read the installation instructions carefully before installation.
CAUTION: Panels should only be installed/operated by qualified and trained professionals ONLY.
CAUTION: Always mount panels in a safe and stable manner.
CAUTION: INDOOR / DRY location use ONLY! Outdoor use will void the warranty.
CAUTION: Wear appropriate safety equipment during panel installation.
CAUTION: Turn OFF power to panel, computers, servers, system boxes, and monitors before
making any type of power or data connections and performing any maintenance work.
CAUTION: Read user manual carefully to ensure normal operation and lifespan of the panel.
CAUTION: Electronics used in this panel are ESD (Electrostatic Discharge) sensitive. To protect
device from ESD, wear a grounded ESD wrist strap or similar grounding device when handling panel.
CAUTION: Panel must be properly grounded before operating. (resistance must be less than 4Ω)
CAUTION: Ensure all power is disconnected from panel before unplugging any data cables from the
panel, especially serial line ports.
CAUTION: Route power and data cables so that they are NOT likely to be walked on or pinched.
CAUTION: Air conditioning is required if operating environment temperature exceeds 30°C (86°F).
CAUTION: Test panel for 2-hours per week, if not used regularly or for an extended period of time.
CAUTION: Cases used to transport panel must me properly waterproofed for transportation.
ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, Netherlands
8
MAINTENANCE GUIDELINES
Careful and regular maintenance is necessary to optimize the potential functional lifespan of the DS4
LED Video Panels.
1. Read the installation and operation instructions for correct operation of the DS4QC LED Video
Panels.
2. Although the DS4QC LED Video Panels are designed and built to withstand some impact forces
when installed correctly, take care to avoid impact damage when handling or transporting them,
especially corners and edges which are particularly frangible during transportation.
3. The fixture should be serviced by a qualified service technician when:
A. Objects have fallen, or liquid has been spilled into the fixture.
B. The fixture has been exposed to rain or water.
C. The fixture does not appear to operate normally or exhibits a marked change in performance.
D. The fixture has fallen and/or subjected to extreme handling.
4. Check each DS4QC LED Video Panel for loose screws and other fasteners.
5. If the DS4QC LED Video Panel installation is fixed or displayed for a lengthy time, regularly
inspect all rigging and installation equipment, and replace or repair it as necessary, and during
long periods of non-use, disconnect the main power to the unit.
6. Because the nanocomposite material comprising the DS4QC LED Video Panel frames is
susceptible to damage caused from exposure to oil, acid, and other corrosive substance, bar any
exposure of the DS4QC panel and frame structures to those substances.
7. Use necessary ESD (electrostatic discharge) precautions when handling DS4QC LED Video
Panels, especially the LED screens, as they are ESD sensitive and easily damaged from ESD
exposure.
8. The Null Line and Live Line connections from the computer and control system cannot be
reversed, and should therefore only be connected in original layout order.
9. If the GFI (Ground Fault Interrupt) breaker-switch trips often, check the display or replace the
power-supply switch.
10. When operating the DS4QC LED Video Panels, power the computer before powering the LED
Video Screens; conversely, when shutting down after operation, turn the LED Video Panels off
before turning off the computer. If the PC is turned off first, a high intensity brightness might
appear, causing catastrophic failure to those LEDs.
11. If while conducting an electrical test a circuit shorts, a breaker-switch trips, wires burn, and or any
other abnormality appears, discontinue testing and troubleshoot units to find the problem before
continuing with any testing or operation.
12. To ensure consistent operation, it might be necessary to learn operating parameters for
installation, data recovery, backup, controller settings, and basic data preset modification.
13. Regularly check computer for any viruses, and remove any irrelevant data.
14. Only a qualified technician should operate software system.
15. Remove any moisture found inside or outside of any DS4QC LED Video Panels before
dismantling video installation, and returning them to their respective flight cases. Ensure flight
cases are free of any moisture, using a fan to dry them if necessary, and avoid ESD generating
friction when returning DS4QC LED Video Panels.
16. Because the DS4QC LED Video Panels are strictly designed for indoor usage, limit or remove
any unit exposure to moisture, condensation, or humidity, and consider using air conditioning
where available.
17. When not in use, store DS4QC LED Video Panels in a dry, well ventilated facility.
ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, Netherlands
9
PANEL OVERVIEW
The DS4T Triangle LED Video Panel
includes a power supply, modules, and receiver card. The cover of the power supply box can be
secured to protect all internal accessories and components. Instead of traditional die cast aluminum
alloy or steel, the panel of the DS4 Triangle panels are comprised of a special lightweight industrial
nanocomposite material (nanotechnology polymer) to greatly reduce panel weight. Because of the
specific quarter panel orientation and how the video signal is sent, and consequently displayed, all
four DS4T Triangle Panels are used to form a circle.
Dimensions: 19.7” x 19.7” x 2 .9” (500x500x73mm).
DS4T4
(Top Left)
DS4T1
(Top Right)
DS4T3
(Bottom Left)
DS4T2
(Bottom Right)
DS4T1
ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, Netherlands
10
PANEL OVERVIEW
DS4T1
(Top Right)
DS4T2
(Bottom Right)
DS4T3
(Bottom Left)
DS4T4
(Top Left)
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Monitor de ADJ
