ADJ STARSHIP Manual de usuario

User Instructions

STARSHIP

instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying

product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection

claimed includes all forms and matters of copyrightable materials and information now allowed by

statutory or judicial law or hereinafter granted. Product names used in this document may be

trademarks or registered trademarks of their respective companies and are hereby acknowledged.

All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of

their respective companies.

ADJ Products, LLC and all aliated companies hereby disclaim any and all liabilities for property,

equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic

loss associated with the use or reliance of any information contained within this document, and/or as

a result of the improper, unsafe, unsucient and negligent assembly, installation, rigging, and opera-

tion of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment. Please turn o all electrical products when

they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power

when not in use. Thank you!

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS

This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installa-

tion. This device uses and can radiate radio frequency energy and, if not installed and used in accordance

with the included instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this device does cause harmful

interference to radio or television reception, which can be determined by turning the device off and on, the

user is encouraged to try to correct the interference by one or more of the following methods:

· Reorient or relocate the device.

· Increase the separation between the device and the receiver.

· Connect the device to an electrical outlet on a circuit different from which the radio receiver is

connected.

· Consult the dealer or an experienced radio/TV technician for help.

DOCUMENT VERSION

Due to additional product features and/or enhancements, an updated version of this document

may be available online.

Please check www.adj.com for the latest revision/update of this manual before beginning

installation and/or programming.

08/02/19 1 1.1 22/120 Initial Version

Date Document

Version

Software

Version >

DMX Channel

Mode Notes

ADJ Products, LLC - www.adj.com - Starship User Manual Page 2

Starship Table of Contents

Introduction

Features I Warranty Registration

Safety Guidelines

Overview

Installation

DMX Set Up

DMX Addressing

DMX Channel Modes

System Menu

Auto Mode I Master-Slave Conguration

Pixel Zone Layout

Dimmer Curve Chart

Dimensional Drawings

Power Linking I Fuse Replacement

Trouble Shooting I Cleaning

Limited Warranty (USA Only)

Technical Specications

ADJ Products, LLC - www.adj.com - Starship User Manual Page 3

Starship Introduction

Unpacking: Thank you for purchasing the Starship by ADJ Products, LLC. Every Starship has been

thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping

carton for damage that may have occurred during shipping. If the carton appears to be damaged,

carefully inspect your xture for any damage and be sure all accessories necessary to operate the unit

has arrived intact. In the case damage has been found or parts are missing, please contact our toll free

customer support number for further instructions. Do not return this unit to your dealer without rst

contacting customer support.

Introduction: The ADJ Starship is a DMX intelligent, centerpiece effect light. To optimize the performance

of this product, please read these operating instructions carefully to familiarize yourself with the basic

operations of this unit.This product is intended to be used by professionally trained personnel only

and is not suitable for private use.

These instructions contain important safety information regarding the use and maintenance of this

unit. Please keep this manual with the unit, for future reference.

Customer Support: Contact ADJ Service for any product related service and support needs. Also visit

forums.adj.com with questions, comments or suggestions.

Parts: To purchase parts online visit:

http://parts.adj.com (US)

http://www.adjparts.eu (EU)

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

Voice: 800-322-6337 | Fax: 323-832-2941 | [email protected]

ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

Voice: +31 45 546 85 60 | Fax: +31 45 546 85 96 | [email protected]

ADJ PRODUCTS LLC USA

6122 S. Eastern Ave. Los Angeles, CA. 90040

323-582-2650 | Fax 323-532-2941 | www.adj.com | info@adj.com

ADJ SUPPLY Europe B.V

Junostraat 2 6468 EW Kerkrade, The Netherlands

+31 (0)45 546 85 00 | Fax +31 45 546 85 99

www.adj.eu | [email protected]

ADJ PRODUCTS GROUP Mexico

AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000

+52 (728) 282-7070

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself,

doing so will void your manufactures warranty. In the unlikely event your unit may require service

please contact ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

Starship Features

• Multi-Colors

• Multiple Operating Modes

• Electronic Dimming 0-100%

• Built in Microphone

• DMX-512 protocol

• 3-Pin DMX Connection

• 2 DMX Modes: 22 Channel Mode and 120 Channel Mode

• Multiple Unit Power Linking (See page 28

Included:

1 x Twist Lock Power Cable

2 x Omega Brackets

Starship Warranty Registration

The Starship carries a 2 year limited warranty. Please fill out the enclosed warranty card to validate

your purchase. All returned service items whether under warranty or not, must be freight pre-paid and

accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the out-

side of the return package. A brief description of the problem as well as the R.A. number must also

be written down on a piece of paper included in the shipping carton. If the unit is under warranty, you

must provide a copy of your proof of purchase invoice. You may obtain a R.A. number by contacting

our customer support team on our customer support number. All packages returned to the service

department not displaying a R.A. number on the outside of the package will be returned to the ship-

per.

ADJ Products, LLC - www.adj.com - Starship User Manual Page 4

ADJ Products, LLC - www.adj.com - Starship User Manual Page 5

Starship Safety Guidelines

• To reduce the risk of electrical shock or re, do not expose this unit rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to

remove or break o the ground prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6”

(15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product outdoors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by

items placed upon or against them, paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 28

for cleaning details.

• Heat -The appliance should be situated away from heat sources such as radiators, heat registers,

stoves, or other appliances (including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the fixture.

C. The fixture has been exposed to rain or water.

D. The fixture does not appear to operate normally or exhibits a marked change in performance.

E. The fixture has fallen and/or subjected to extreme handling.

CAUTION! DO NOT TOUCH LED BARS WHILE FIXTURE IS IN USE OR POWERED. HOT!

LED BARS

ADJ Products, LLC - www.adj.com - Starship User Manual Page 6

Starship Overview

1. DMX Signal Indicator

2. LED Display

3. MENU Button

4. UP Button

5. DOWN Button

6. ENTER Button

7. Microphone

8. Twist Lock Power Out

9. Twist Lock Power In

10. Fuse (5A)

11. 3-Pin DMX Out

12. 3-Pin DMX In

1 2 3 4 5 6 7

12 11 10 9

ADJ Products, LLC - www.adj.com - Starship User Manual Page 7

Starship Installation

CLAMP INSTALLATION

Screw one clamp via a M12 screw and nut into the Omega holder. Insert the quick-lock fasteners of

the Omega holder into the respective holes of the mounting plate. Tighten the quick-lock fasteners

fully clockwise. Pull the safety-cable through the two rigging points located on the bottom of the unit

and over the trussing system or a safe xation spot. Insert the end in the carabine and tighten the

safety screw.

OVERHEAD RIGGING

The Starship is fully operational in three dierent mounting positions, hanging upside-down,

mounted sideways on trussing, or set on a at level surface. Be sure this xture is kept at least 12m

(40ft) away from any ammable materials (decoration etc.). Always use and install the supplied safety

cable as a safety measure to prevent accidental damage and/or injury in the event the clamp fails

(see next page). Never use the carrying handles for secondary attachment. When installing the unit,

the trussing or area of installation must be able to hold 10 times the weight without any deformation. When

installing the unit must be secured with a secondary safety attachment, e.g. and appropriate safety

cable. Never stand directly below the unit when mounting, removing, or servicing the unit.

Overhead mounting requires extensive experience, including calculating working load limits, installation

material being used, and perodic safety inspection of all installation material and unit. If you lack

these qualications, do not attempt the installation yourself.

These installaiton should be checked by a skilled person once a year.

ADJ Products, LLC - www.adj.com - Starship User Manual Page 8

Starship Installation

SAFETY CABLE ATTACHMENT POINTS

SAFETY CABLE (NOT INCLUDED)

CLAMP (NOT INCLUDED)

QUICK-LOCK FASTENER

OMEGA BRACKET

ADJ Products, LLC - www.adj.com - Starship User Manual Page 9

Starship DMX Set Up

DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used as a form of communication

between intelligent fixtures and controllers. A DMX controller sends DMX data instructions from

the controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the

DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a

DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of dierent manufactures to be

linked together and operate from a single controller, as long as all xtures and the controller are DMX

compliant. To ensure proper DMX data transmission, when using several DMX fixtures try to use

the shortest cable path possible. The order in which fixtures are connected in a DMX line does not

influence the DMX addressing. For example; a fixture assigned a DMX address of 1 may be placed

anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is

assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that

unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX Operation): The Starship can be controlled via

DMX-512 protocol. The DMX address is set on the top panel of the unit. Your unit and your DMX controller

require a standard 3-pin XLR connector for data input and data output (Figure 1). We recommend Accu-

Cable DMX cables. If you are making your own cables, be sure to use standard 110-120 Ohm shielded

cable (This cable may be purchased at almost all pro lighting stores). Your cables should be made with

a male and female XLR connector on either end of the cable. Also remember that

DMX cable must be daisy chained and cannot be split.

Notice: Be sure to follow gures two and three when making your own cables. Do

not use the ground lug on the XLR connector. Do not connect the cable’s shield

conductor to the ground lug or allow the shield conductor to come in contact

with the XLR’s outer casing. Grounding the shield could cause a short circuit and

erratic behavior.

Figure 1

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OT

3-PIN XLR

Figure 2

Figure 3

1 Ground 1 Ground

XLR Male Socket XLR Pin Conguration

3 Hot

2 Cold 2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Tabla de contenidos

Otros manuales de Equipo de DJ de ADJ

ADJ

ADJ ENCORE PROFILE MINI COLOR Manual de usuario

ADJ

ADJ HEX700 Manual de usuario

ADJ

ADJ Focus Spot Three Z Manual de usuario

ADJ

ADJ MB DMX II Manual de usuario

ADJ

ADJ Gobo Motion LED Instrucciones de instalación

ADJ

ADJ HEX206 Manual de usuario

ADJ

ADJ HYD320 Manual de usuario

ADJ

ADJ THEATRIX PRO 48 LED Manual de usuario

ADJ

ADJ AV6XS Manual de usuario

ADJ

ADJ VIZI CMY300 Manual de usuario

ADJ

ADJ Mega QPlus GO Manual de usuario

ADJ

ADJ POCKET PRO Manual de usuario

ADJ

ADJ Focus Spot 5Z Manual de usuario

ADJ

ADJ SABER SPOT WW Manual de usuario

ADJ

ADJ Par Z Move RGBW Manual de usuario

ADJ

ADJ MDF2-9SYS Manual de usuario

ADJ

ADJ Mega GO Bar 50 RGBA Manual de usuario

ADJ

ADJ Jolt Bar FX Manual de usuario

ADJ

ADJ DOTZ PAR 100 Manual de usuario

ADJ

ADJ Flat Par Tri18 Manual de usuario

ADJ

ADJ M-101HD Manual de usuario

ADJ

ADJ LINK Manual de usuario

ADJ

ADJ 32 HEX PANEL IP Manual de usuario

ADJ

ADJ PAR Z120 RGBW Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario