ADJ FS3000LED Manual de usuario

User Manual

FS3000LED

US SKU#: FS3000

EU SKU#: 1237000304

UPC#: 818651028256

instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying

product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection

claimed includes all forms and matters of copyrightable materials and information now allowed by

statutory or judicial law or hereinafter granted. Product names used in this document may be

trademarks or registered trademarks of their respective companies and are hereby acknowledged.

All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of

their respective companies.

ADJ Products, LLC and all aliated companies hereby disclaim any and all liabilities for property,

equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic

loss associated with the use or reliance of any information contained within this document, and/or as

a result of the improper, unsafe, insucient and negligent assembly, installation, rigging, and opera-

tion of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment. Please turn o all electrical products when

they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power

when not in use. Thank you!

DOCUMENT VERSION

Due to additional product features and/or enhancements, an updated version of

this document may be available online.

Please check www.adj.com for the latest revision/update of this manual

before beginning installation and/or programming.

08/11/20 1.0 1.0 1 / 3 / 6 Channels Initial Release

Date Document

Version

Software

Version > DMX Channel Mode Notes

ADJ Products, LLC - www.adj.com - FS3000LED User Manual Page 2

ADJ Products, LLC - www.adj.com - FS3000LED User Manual Page 3

FS3000LED Table of Contents

Introduction 4

Features | Warranty Registration 5

Safety Guidelines 6

Overview 7

Installation 8

Gobo Installation 10

4-slot Boomerang 11

System Menu 12

DMX Traits 15

Manual Mode 21

Dimensional Drawings 22

Specications 23

Limited Warranty (USA Only) 24

ADJ Products, LLC - www.adj.com - FS3000LED User Manual Page 4

Introduction: Congratulations on your purchase of the ADJ FS3000LED! This device is a powerful

and feature-packed follow spot powered by a 300W white C.O.B. (Chip On Board) LED with a color

temperature of 6000K. The FS3000LED has been designed to perform reliably for years when the

guidelines in this booklet are followed. Please read and understand the instructions in this manual

carefully and thoroughly before attempting to operate this device. These instructions contain impor-

tant information regarding safety during use and maintenance.

Please keep this manual with the device for future reference.

Customer Support: Contact ADJ Service for any product related service and support needs. Also visit

forums.adj.com with questions, comments or suggestions.

Parts: To purchase parts online visit:

http://parts.adj.com (US)

http://www.adjparts.eu (EU)

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

Voice: 800-322-6337 | Fax: 323-582-2941 | [email protected]

ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

Voice: +31 45 546 85 60 | Fax: +31 45 546 85 96 | [email protected]

ADJ PRODUCTS LLC USA

6122 S. Eastern Ave. Los Angeles, CA. 90040

323-582-2650 | Fax 323-532-2941 | www.adj.com | info@adj.com

ADJ SUPPLY Europe B.V

Junostraat 2 6468 EW Kerkrade, The Netherlands

+31 (0)45 546 85 00 | Fax +31 45 546 85 99

www.adj.eu | [email protected]

ADJ PRODUCTS GROUP Mexico

AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000

+52 (728) 282-7070

WARNING! To prevent or reduce the risk of electrical shock or re, do not expose this unit to rain or

moisture.

CAUTION! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself,

doing so will void your manufacturer’s warranty. In the unlikely event your unit may require service,

please contact ADJ Products, LLC.

Do not discard the shipping cartoon in the trash. Please recycle when ever possible.

FS3000LED Introduction

FS3000LED Features

• Beam angle: 12~32-degree manually adjustable

• Color touch screen display with selectable settings

• Manual Dimming Potentiometer

• Manual Zoom

• Manual Focus

• Manual Iris

• Fan cooling

• Hanging Bracket

• Compatible with ADJ UC IR wireless remote

Included Items:

• Power cable with locking IP connector (x1)

• 4-slot Boomerang (x1)

• Wireless remote control (x1)

• “B” size gobo holder (x1)

• Glass gobo (x1)

• Donut (x1)

• Thumb screws (x4)

FS3000LED Warranty Registration

The FS3000LED carries a 2 year limited warranty. Please fill out the enclosed warranty card to vali-

date your purchase. All returned service items,whether under warranty or not, must be freight pre-

paid and accompanied by a return authorization (R.A.) number. The R.A. number must be clearly written

on the outside of the return package. A brief description of the problem as well as the R.A. number

must also be written down on a piece of paper included in the shipping carton. If the unit is under

warranty, you must provide a copy of your proof of purchase invoice. You may obtain anR.A. number

by contacting our customer support team. All packages returned to the service department not dis-

playing anR.A. number on the outside of the package will be returned to the shipper.

ADJ Products, LLC - www.adj.com - FS3000LED User Manual Page 5

ADJ Products, LLC - www.adj.com - FS3000LED User Manual Page 6

FS3000LED Safety Guidelines

For Your Own Personal Safety, Please Read and Understand This Manual Completely Before

You Attempt To Install Or Operate This Unit!

• Be sure to save the packing carton in the unlikely event the device may have to be returned for

service

• Do not spill water or other liquids into or on to the device

• Be sure that the local power outlet matches the required voltage for the device

• Do not open up the device under any conditions. There are no user serviceable parts inside

• Disconnect the device’s main power when left unused for long periods of time

• Never connect this device to a dimmer pack

• Do not attempt to operate this device if it has been damaged in any way

• Never operate this device with the cover removed

• To reduce the risk of electrical shock or re, do not expose this device to rain or moisture

• Do not attempt to operate this device if the power cord has been frayed or broken. Do not attempt

to remove or break o the ground prong from the electrical cord. This prong is used to reduce the

risk of electrical shock and re in case of an internal short

• Disconnect from main power before making any type of connection

• Never block the ventilation holes. Always be sure to mount this device in an area that will allow

proper ventilation. Allow about 6” (15cm) between this device and a wall

• This unit is intended for indoor use only. Use of this product outdoors voids all warranties

• Always mount this unit in a safe and stable matter

• Please route your power cord out of the way of foot trac. Power cords should be routed so they

are not likely to be walked on, or pinched by items placed upon or against them

• Ambient operating temperature ranges is from 14°F to 113°F (-10°C to 45°C). Do not operate

this device when ambient temperature falls outside of this range!

• Keep ammable materials away from this xture!

• FIXTURE IS DESIGNED FOR INDOOR USE ONLY! DO NOT EXPOSE TO RAIN OR MOISTURE!

• The device should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen on, or liquid has been spilled into, the device.

C. The device has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a marked change in performance.

ADJ Products, LLC - www.adj.com - FS3000LED User Manual Page 7

FS3000LED Overview

1. Iris Adjustment

2. Gobo Holder

3. Zoom Adjustment

4. Focus Adjustment

5. 4-slot Boomerang

6. Side Handle

7. Bracket Adjustment

8. Mounting Bracket

9. Mounting Clamp Attachment Point

10. Rear Handles

11. Safety Cable Attachment Point

12. 5-pin DMX In

13. 3-pin DMX In

14. IR Signal Receiver

15. Service Port

16. 3-pin DMX Out

17. 5-pin DMX Out

18. Power Out

19. Power In

20. Fuse 250V/3A

21. Intensity Adjustment

22. Display Screen

ADJ Products, LLC - www.adj.com - FS3000LED User Manual Page 8

FS3000LED Installation

FLAMMABLE MATERIAL WARNING!

Keep drive a minimum of 5.0 feet (1.5m) away from ammable material and/or pyrotechnics.

ELECTRICAL CONNECTIONS

A qualied electrician should be used for all electrical connections and/or installations.

DO NOT INSTALL THE DEVICE IF YOU ARE NOT QUALIFIED TO DO SO!

The unit MUST be installed following all local, national, and country commercial electrical and con-

struction codes and regulations.

Before installing or mounting any device, a professional equipment installer MUST be consulted to

determine whether the mounting structure or surface is properly certied to safely support the com-

bined weight of the xture, clamps, cables, and accessories.

Overhead xture installations must always be secured with a secondary safety attachment, such as

an appropriately rated safety cable that meets all local, national, and country codes and regulations.

Ambient operating temperature range is from 14°F to 113°F (-10°C to 45°C). Do not operate this

device when ambient temperature falls outside this range.

This xture should be installed in areas outside walking paths, seating areas, or away from areas

where unauthorized personnel might be able to reach the device by hand.

NEVER stand directly below the xture when rigging, removing, or servicing.

Allow approximately 15 minutes for the xture to cool down before servicing.

ADJ Products, LLC - www.adj.com - FS3000LED User Manual Page 9

FS3000LED Installation

CLAMP INSTALLATION

This xture features a mounting clamp attachment point, which is located on the mounting yoke,

as well as a safety cable rigging point, located near the display screen (see the illustration below).

When mounting the xture to a truss or any other suspended or overhead installation, be sure to

secure an appropriately rated clamp (not included) to the clamp attachment point and attach a

separate SAFETY CABLE of the appropriate safety rating to the safety cable rigging point.

SAFETY CABLE

ALWAYS ATTACH A SAFETY

CABLE WHENEVER INSTALLING

THIS FIXTURE IN A SUSPENDED

ENVIRONMENT TO ENSURE

THAT THE FIXTURE WILL NOT

FALL IF THE CLAMP FAILS.

RIGGING

Overhead rigging requires extensive experience, including but not limited to: calculating working

load limits, understanding the installation material being used, and periodic safety inspection of all

installation material and the xture itself. If you lack these qualications, do not attempt to perform

the installation yourself. Improper installation can result in bodily injury.

FS3000LED Gobo Installation

ADJ Products, LLC - www.adj.com - FS3000LED User Manual Page 10

In order to install and use the included Gobo Holder, follow the directions shown below:

2. Unscrew the retainer screw from the Gobo Holder.

3. Open up the Gobo Holder. Slide the Glass Gobo between the two halves of the Gobo Holder,

making sure that the Glass Gobo has been placed securely in its cutout.

4. Close the Gobo Holder. Replace and tighten the retainer screw.

1. Remove the Gobo Holder from its slot. The Gobo Holder handle is the ring-shaped item located

just aft of the Iris Adjustment lever.

5. Re-insert the Gobo Holder back into its slot on the xture. Make sure that the retainer screw on

the Gobo Holder is facing backwards (towards the control screen).

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de DJ de ADJ

ADJ

ADJ penta pix Manual de usuario

ADJ

ADJ 1226100374 Manual de usuario

ADJ

ADJ HYDRO WASH X7 Manual de usuario

ADJ

ADJ PAR Z120 RGBW Manual de usuario

ADJ

ADJ VIZ870 Manual de usuario

ADJ

ADJ Mega Go Bar 50 Manual de uso y cuidado

ADJ

ADJ ENCORE LP18IP Manual de usuario

ADJ

ADJ stinger ii Manual de usuario

ADJ

ADJ VIZI CMY300 Manual de usuario

ADJ

ADJ VF SNOW FLURRY HO Manual de usuario

ADJ

ADJ 3D Vision Manual de usuario

ADJ

ADJ 32 HEX PANEL IP Manual de usuario

ADJ

ADJ BOOM BOX FX3 Manual de usuario

ADJ

ADJ Startec RAYZER Manual de usuario

ADJ

ADJ Focus Spot 5Z Manual de usuario

ADJ

ADJ FREQ Matrix Manual de usuario

ADJ

ADJ VIZI CMY300 Manual de usuario

ADJ

ADJ ELEMENT QA Manual de usuario

ADJ

ADJ ENCORE BURST RGBW IP Manual de usuario

ADJ

ADJ M-1616 Manual de usuario

ADJ

ADJ MDF2PSUX117 Guía del usuario

ADJ

ADJ Color Stand LED Manual de usuario

ADJ

ADJ 18P HEX IP Manual de usuario

ADJ

ADJ Hydro Profile Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario