ADDAC System ADDAC713 Manual de usuario

February.2023

ADDAC713 Assembly Guide

ADDAC SYSTEM page 2

ADDAC SYSTEM page 3

STEP 1:

Grab the pcb, gently brake it apart and trim the

excess with a cutting plier.

STEP 2:

Locate all TO-92 parts and sepa-

rate them as shown here.

Notice the orientation of the part

printed on the pcb and place them

in their respective places.

Proceed by soldering them and

trim the excess legs.

ADDAC713 Assembly Guide

MC79L05

2N3702

2N3392

ADDAC SYSTEM page 4

STEP 3:

Next place and solder the trimmers as

shown, the golden dials should be facing

outwards.

STEP 4:

Place and solder the 2x8 pinheader.

STEP 5:

Place and solder the 2x5 boxed pinheader.

Notice the indent orientation.

STEP 6:

Place and solder the 2x1 pinheader.

ADDAC713 Assembly Guide

ADDAC SYSTEM page 5

STEP A:

Place and solder the jumpers on the back of

the pcb.

Notice the orientation marked on the pcb.

! NOTICE !

These steps are only necessary for the pcbs

that have the jumpers on the back, in newer

revisions these jumpers were removed.

STEP B:

Place and jumper caps on the pinheaders

facing the “0” marking on the pcb

ADDAC713 Assembly Guide

ADDAC SYSTEM page 6

STEP 7:

Next attach the spacers as shown.

STEP 8:

Grab both pcbs allign them together and

solder the pinheaders on the top pcb.

ADDAC713 Assembly Guide

ADDAC SYSTEM page 7

STEP 10:

Locate the jacks and cut the thinest leg like shown below.

STEP 9:

Next we’ll need to prepare some parts before placing them to the front panel.

Locate all trim pots and flatten out their legs with the help of some pliers, like shown below.

ADDAC713 Assembly Guide

ADDAC SYSTEM page 8

Threaded Jacks Threaded

Jacks

Non-threaded

Jacks Non-threaded

Jacks

B10k = 103

(6 LEGS)

B10k = 103

(TRIM POT)

B10k = 103

(6 LEGS)

B10k = 103

(6 LEGS)

B10k = 103

(TRIM POT)

B10k = 103

(3 LEGS)

B10k = 103

(TRIM POT)

B10k = 103

(6 LEGS)

B10k = 103

(6 LEGS)

DPDT Switch

STEP 11:

Next place all parts on the pcb, notice the values, orientation and jack types like shown below.

ADDAC713 Assembly Guide

ADDAC SYSTEM

STEP 12:

Place the frontpanel and tighten all nuts.

page 9

ADDAC713 Assembly Guide

STEP 14:

Place the 2 back screws.

ADDAC SYSTEM page 10

STEP 13:

Adjust the height of the pcb keeping it parallel to the front panel and proceed to solder all parts.

Keep lines parallel

ADDAC713 Assembly Guide

Otros manuales para ADDAC713

Tabla de contenidos

Otros manuales de Mezclador de música de ADDAC System

ADDAC System

ADDAC System 703 Manual de usuario

ADDAC System

ADDAC System ADDAC216 Sum & Difference Manual de usuario

ADDAC System

ADDAC System ADDAC713 Manual de usuario

Manuales populares de Mezclador de música de otras marcas

Neve

Neve 8816 Manual de usuario

Mackie

Mackie Onyx Analogue Mixer Manual de usuario

Behringer

Behringer EUROPOWER PMP518M Manual de usuario

Peavey

Peavey S-32 Sanctuary Series Manual de usuario

Rane

Rane MP 4 Manual de usuario

True

True T9 Touchscreen Console Manual de usuario

Studiomaster

Studiomaster Air Pro 24 Manual de usuario

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Manual de usuario

Roland

Roland M-160 Manual de usuario

Yamaha

Yamaha MR1642 Manual de usuario

Ecler

Ecler MAC40v Manual de usuario

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Manual de usuario

Veeder-Root

Veeder-Root TLS-350 Series Manual de usuario

Alto

Alto APM80.QUAD Manual de usuario

Omnitronic

Omnitronic PM-211 Manual de usuario

SoundCraft

SoundCraft B400 Manual de usuario

Roland

Roland SoundCanvas SC-8820 Manual de usuario

CARVIN

CARVIN RX 1200 Manual de usuario