Actxa Spark+ Series 2 Manual de usuario
Model No: AX-H210-00
User Guide
Activity Tracker With
Advanced Fitness
& Sleep Tracking
‹Series 2 ›
01› Introducing The Actxa Spark+
The Actxa Spark+ is an all-day activity tracker with continuous
heart rate monitoring and heart rate zone indication markers. It
measures VO2 Max and Fitness Age and also tracks your sleep
using advanced SleepTrackTM algorithm.
02 › Turning On
All new Actxa Spark+ activity trackers are pre-packaged on
hibernation mode for battery conservation purposes. On your
first use, place the Actxa Spark+ on the magnetic charging
cable, before switching on the power either from an adapter
or standard USB port.
Please allow a minimum of two-hours charge up before
attempting to pair the Actxa Spark+ to your smartphone.
03 › Optimum Fit
For the best heart rate tracking results, position the Actxa
Spark+ approximately one finger-width away from your wrist
bone, and ensure the buckle is secured for a tight, but
breathable fit.
05 › Syncing On The Actxa App
Launch the Actxa App and follow the on-screen instructions to
activate your Actxa Spark+ activity tracker and pair the device
with your smartphone. Once successfully paired, you will be
able to sync all daily activity statistics from the tracker to the
Actxa App.
04 › Set Up With The Actxa App
Download the Actxa App to set up your personal account and to
activate the Actxa Spark+ activity tracker. The Actxa App can
be installed from the App Store or Google Play.
Daily Use
A gentle tap on the touch button located below the screen
will activate the display. Continue tapping to toggle between
the various screens to view different activity information.
Alternatively, simply raise your wrist to activate the
display automatically.
Intensity MinutesActivityHome Screen
Real-Time
HR Monitoring
Move Alert
Workout
Call/Message
Alert
Silent Alarm
Workout
To turn on Workout mode, tap and hold the touch button at the
workout screen to enter the workout submenu. Tap to select
the workout activity. Tap and hold again to start the workout.
To end the workout, tap and hold the touch button again for
3 seconds. Your workout summary will be displayed.
To record on a workout session with connected GPS,start the
workout using the Actxa App.
Note: The Spark+ activity tracker is able to monitor your
Intensity Minutes automatically throughout the day.
Find out your VO2 Max fitness level and Fitness Age by using
the VO2 Max feature. Find an outdoor venue where you can
brisk walk continuously without stopping or interruption.
Launch Actxa App and select VO2 Max measurement on
dashboard or device page. Follow the guidance provided by
the app to complete the VO2 Max measurement.
Note: This feature requires connected GPS. You may also get a
VO2 Max reading during an Outdoor Walk/Run workout if it
meets the VO2 Max measurement criteria.
VO2 Max & Fitness Age Test
If you cannot get a VO2 Max and Fitness Age reading,
try these tips:
• Brisk walk with a natural but consistent stride. You do
not need to deliberately take longer or shorter strides.
• Swing your arms naturally.
• Walk continuously on flat ground.
• Wear the Spark+ correctly (see Optimum Fit section).
No VO2 Max Reading?
Your Activity In A Flash
Sync your daily stats with Actxa App and view your activity in
a flash on the Dashboard.
Tabla de contenidos
Otros manuales de Rastreador de actividad física de Actxa
