TactronikTM Evaluation Kit - User Manual
Table of Contents
1. Introduction 4
2. Inside the Box 5
3. Quick Start (Evaluation Mode) 6
4. Application Interface 7
4.1. Application Interface: Section Guide 7
4.1.1. Application Interface: Section Explanations 7
4.2. How To: Save or delete a haptic effect with a new user preset 9
4.3. How To: Import an effect database 10
4.3.1. How To: Merge an imported effect database 10
5. Evaluation Board 11
5.1. View of TactronikTM Board 11
5.1.1. Arduino Section 12
5.1.2. TactronikTM Section 13
5.2. Configuration 13
5.2.1. Serial Switch 13
5.3. Power Supply 14
5.4. Connection 15
5.4.1. Micro USB Connections 15
5.4.2. External Sensor Modules 15
5.4.3. Actuators 16
5.5. Debugging 16
5.5.1. Measure Current 16
5.5.2. Signal Debugging 17
5.6. Studied Enough? Go Ahead and Start. 17
5.6.1. Connect TactronikTM to PC with/without Sensor Module 17
5.6.2. Connect Using your Own Application 18
6. External Sensor Modules 18
6.1. Force Sensor Module 18
6.2. Trackpad Module 19
7. Actuator Characteristics 20
7.1. Technical Characteristics & Figures 20
7.2. Performance Graphs 21
8. TactronikTM Module 23
