Action AT-2151HD Manual de usuario
AT-2151HD
PRODUCT MANUAL
COLOR LCD MONITORCOLOR LCD MONITOR
Table
Instruction of knobs and buttons operationr-------------------------------------------- 2
Rear panel function sketch map---------------------------------------------------------- 3
Signal Formats---------------------------------------------------------------------------------4
Functional menu------------------------------------------------------------------------------5
Color calibration setting-------------------------------------------------------------------- 6
Scaling setting-------------------------------------------------------------------------------- 7
Scan mode------------------------------------------------------------------------------------ 8
Mark aspect----------------------------------------------------------------------------------- 9
Safety Setting--------------------------------------------------------------------------------10
Mark-line Options--------------------------------------------------------------------------- 11
Embedded Audio---------------------------------------------------------------------------12
Wave Form------------------------------------------------------------------------------------13
False colors setting ----------------------------------------------------------------------- 14-
Color Only-------------------------------------------------------------------------------------15
GPI connection -----------------------------------------------------------------------------16
Language-------------------------------------------------------------------------------------17
Menu duration-------------------------------------------------------------------------------18
Text color--------------------------------------------------------------------------------------19
Device information------------------------------------------------------------------------- 20
Restore Setting-------------------------------------------------------------------------------21
Accessaries---------------------------------------------------------------------------------- 25
Malfunction detect------------------------------------------------------------------------ 26
Power input----------------------------------------------------------------------------------- 22
Complete set-up----------------------------------------------------------------------------24
Specification---------------------------------------------------------------------------------23
Front panel function sketch map----------------------------------------------------------1
1
Front panel function sketch map
1 Power indicator
8 Table bracket
2 Multiple functions Knob / key
3 Main menu
9 Auto backlight
7 Headphone jack
6 Status lock/unlock / Esc
5 Input source option keys
4 Shortcut keys user-defined
1
2
ÀصñÀصñ
34567
8
9
SOURCE
2
Instruction of knobs and buttons operationr
Press key SOURCE ,switch among selecting input signal formats.
4. SOURCE input signal source switch key
Please see page 8 for the more setting of video input format.
Sharpness
Saturation
Contrast
Brightness
Volume
Image adjustment menu
2. Multiple functions Knob / key
get the menu of Image adjustmentPress the key to .
key to .select the item based on your demand
the knob to enter the main menu ,and pTurn ress the
the knob to adjust theTurn image parameter.
Press key to work as confirmation key when operating the main menu.
3. MENU main menu key
Press key MENU to get the main menu.
the knob to change the function in the main menu.Turn
F1~F3 is the system default shortcut key , the functions as below
5. Shortcut keys
F1----WAVE FORM F2---- FALSE COLORS F3---- MARK
The former setup will be invalid after you set up the Fast Key for a new function,
please see to Page 10 for more setting about Short-cut Key.
Press the Short-cut Key repeatedly to cycle in the options.
it again ,he monitor can switch between Working---Standby the loudspeakers closes
automatically.
1. ower switch keyP
Press the key for 3 second,the monitor will turn off to Standby,press
ÀصñÀصñ
6. ESC/LOCK Lock up buttons and knobs
LOCKPress the button ESC/ and hold it for three seconds, it will show KEY LOCK
On on the screen, and the green light on front panel will turn on, it means LOCK UP
function is open.
In stated of LOCK UP, all the buttons and knobs are invalid. It will still keep LOCK UP
state, even though restart the power.
In state of LOCK UP function, press ESC/LOCK button and hold it for three seconds,
it will show KEY LOCK OFF on the screen, it means unlocked.
During the menu operation, press ESC/LOCK button to exit menu.
3
Rear panel function sketch map
18 HDMI input
13 Install Battery adaptor
12 VESAmounting hole
19 3G/HD/SD-SDI I/O
16 Power switch
17 GPI control port
10 Handle
14 Soft portware updates
11 Speakers
15 DC 12V power input
10
12
13
ÀصñÀصñ
11
141516
17
18
19
HDMIHDMI
3G SDI3G SDI
1
2
4
Signal format
Format
SD-SDI
HDMI 1080/24p/24psf/25p/30p/50i/60i/50p/60p
720/50p / 60p 480i / 480p 576i / 576p
HD-SDI
480i / 576i
1080/24p / 24psf / 25p / 30p / 50i / 60i
720/50p / 60p
1080/ 50p / 60p
Video Signal
3G-SDI
5
Functional menu
Remark:the function in grey word can not work
FUNCTIONS
SYSTEM
LANGUAGE ENGLISH
SYSTEM INFOR
OSD TIME 30S
TEXT COLOR WHITE
SYSTEM RESTORE
CURRENT
SATURATION 32
CONTRAST 20
BRIGHTNESS 32
COLOR -TEMP D65
CALIBARATION
ITU-R BT.709
FORMAT NO SIGNAL
SOURCE SDI
GAMMA 2.4
IMAGE ADJ.
MARKER
MARK ON
SAFETY1
ASPECT 4:3
MARK BG TRANSLU.
LINE COLOR
WHITE
LINE WIDE MIDDLE
CENTER ON
95%
SAFETY2 80%
WAVE FORM
POSITION
DISP BG BLACK
SCALE UNIT IRE
WAVE FORM OFF
OVER LIMIT 100%
UNDER LIMIT 0%
RIGHT-UP
AUDIO
CALIBRATIONS ON
CHANNEL DISPLAY AUTO
RIGHT CHANNEL AUTO
DISPLAYTRPY HORIZONTAL
LEFT CHANNEL AUTO
UNDER LIMIT -18dB
OVER LIMIT -6dB
POSITION
SOURCE SDI
VOLUME 15
LEFT-DOWN
FUNCTIONS
Waveform options is only LUMIN.
TALLY & UMD
COLOR ONLY OFF
HV DELAY OFF
BATTERY CHECK OFF
F KEY SETTING
FALSE COLORS
OFF
PEAKING FOCUS
OFF
TIME CODE OFF
FREEZE OFF
OFF
GPI CONTROL
SOURCE SETTING
ZEBRA STRIPE
PIP/PBP OFF
OFF
CVBS SELECT CVBS
SCALING AUTO
COLOR-TEMP
BRIGHTNESS
CONTRAST
SATURATION
SHARPNESS
D65
32
20
32
3
LUMINACE
CALIBRATION
STANDARD
ITU-R BT.709
GAMMA 2.4
DISPLAY RANGE
STANDARE
IMAGE ADJ OFF
AUTO BACKLIGHT OFF
INPUT RANGE LIMITED2(64-1023)
SAMPLE FORM AUTO
6
Color Calibration Setting
After entering IMAGE ADJ inter-
face, turn the (MENU) knob to select
the IMAGE ADJ. and press the knob to
turn the setting ON .
Press the (MENU) knob to enter the
main menu,turn the knob to select MENU ,
and then press the knob to enter the
IMAGE ADJ interface.
Turn the (MENU) knob to select USER ,
press it again to confirm,and turn the knob to
select R G B-GAIN for adjusting.
DEVICE SYSTEM DEFAULT OFF
OFF
ON
IMAGE ADJ.
MARKER
AUDIO
WAVES
SYSTEM
CURRENT
RETURN
FUNCTIONS
IMAGE ADJ.
MARKER
AUDIO
WAVES
SYSTEM
CURRENT
RETURN
FUNCTIONS
COLOR-TEMP D65
BRIGHTNESS 32
CONTRAST 20
SATURATION 32
SOURCE SDI
FORMAT NOSYNC
CALIBRATION
ITU-R BT.709
Gamma 2.4
IMAGE ADJ.
MARKER
AUDIO
WAVES
SYSTEM
CURRENT
RETURN
FUNCTIONS
COLOR-TEMP USER
R-GAIN 256
RETURN
G-GAIN 256
B-GAIN 256
COPY-CT. D65
Turn the (MENU) knob to select the
COLOR-TEMP. and press the knob to
enter the COLOR-TEMP. Interface.
DISPLAY RANGE
STANDARD
BRIGHTNESS
32
CONTRAST 20
COLOR-TEMP
D65
RETURN
SCALING AUTO
CALIBRATION
ITU-R BT.709
Gamma 2.4
LUMINACE
STANDARD
IMAGE ADJUST OFF
SATURATION 32
SHARPNESS 3
SAMPLE FORM
AUTO
INPUT RANGE
LIMITED2
DISPLAY RANGE
STANDARD
BRIGHTNESS
32
CONTRAST 20
COLOR-TEMP
D65
RETURN
SCALING AUTO
CALIBRATION
ITU-R BT.709
Gamma 2.4
LUMINACE
STANDARD
IMAGE ADJUST ON
SATURATION 32
SHARPNESS 3
SAMPLE FORM
AUTO
INPUT RANGE
LIMITED2
7
Scaling setting
After entering the IMAGE ADJ
interface, Turn the knob to select the
SCALING .Then press the knob
to enter the SCALING interface.
SCALING MODE CAN BE ADJUSTED ONLY BASED ON USER
Press the (MENU) knob to enter the
main menu.
Turn the (MENU) knob to select the
required item , then press the knob to
confirm.
DEVICE SYSTEM DEFAULT IS AUTO
IMAGE ADJ.
MARKER
AUDIO
WAVES
SYSTEM
CURRENT
RETURN
FUNCTIONS
IMAGE ADJ.
MARKER
AUDIO
WAVES
SYSTEM
CURRENT
RETURN
FUNCTIONS
16:9
AUTO
4:3
IMAGE ADJ.
MARKER
AUDIO
WAVES
SYSTEM
CURRENT
RETURN
FUNCTIONS
IMAGE ADJ.
MARKER
AUDIO
WAVES
SYSTEM
CURRENT
RETURN
FUNCTIONS
Turn the knob to select IMAGE ADJ ,
Then press the knobto enter the IMAGE
ADJ interface.
LET BOX
PTP
OVER SCAN
COLOR-TEMP D65
BRIGHTNESS 32
CONTRAST 20
SATURATION 32
SOURCE SDI
FORMAT NOSYNC
CALIBRATION
ITU-R BT.709
Gamma 2.4
DISPLAY RANGE
STANDARD
BRIGHTNESS
32
CONTRAST 20
COLOR-TEMP
D65
RETURN
SCALING AUTO
CALIBRATION
ITU-R BT.709
Gamma 2.4
LUMINACE
STANDARD
IMAGE ADJUST OFF
SATURATION 32
SHARPNESS 3
SAMPLE FORM
AUTO
INPUT RANGE
LIMITED2
DISPLAY RANGE
STANDARD
BRIGHTNESS
32
CONTRAST 20
COLOR-TEMP
D65
RETURN
SCALING AUTO
CALIBRATION
ITU-R BT.709
Gamma 2.4
LUMINACE
STANDARD
IMAGE ADJUST OFF
SATURATION 32
SHARPNESS 3
SAMPLE FORM
AUTO
INPUT RANGE
LIMITED2
FULL SCEEN
CINE 1.3x
CINE 2x
DISPLAY RANGE
STANDARD
BRIGHTNESS
32
CONTRAST 20
COLOR-TEMP
D65
RETURN
SCALING LETBOX
CALIBRATION
ITU-R BT.709
Gamma 2.4
LUMINACE
STANDARD
IMAGE ADJUST OFF
SATURATION 32
SHARPNESS 3
SAMPLE FORM
AUTO
INPUT RANGE
LIMITED2
8
Scan mode
After entering SCALING interface,
turn the (MENU) knob to select SCALING
and press the knob to enter the SCALING
interface.
Press the (MENU) knob to enter the
main menu and turn the knob to select
the IMAGE ADJ .
Turn the (MENU) knob to select
the PAN & SCAN press the MENU)
knob to confirm.
IMAGE ADJ.
MARKER
AUDIO
WAVES
SYSTEM
CURRENT
RETURN
FUNCTIONS
IMAGE ADJ.
MARKER
AUDIO
WAVES
SYSTEM
CURRENT
RETURN
FUNCTIONS
IMAGE ADJ.
MARKER
AUDIO
WAVES
SYSTEM
CURRENT
RETURN
FUNCTIONS
IMAGE ADJ.
MARKER
AUDIO
WAVES
SYSTEM
CURRENT
RETURN
FUNCTIONS
COLOR-TEMP D65
BRIGHTNESS 32
CONTRAST 20
SATURATION 32
SOURCE SDI
FORMAT NOSYNC
CALIBRATION
ITU-R BT.709
Gamma 2.4
DISPLAY RANGE
STANDARD
BRIGHTNESS
32
CONTRAST 20
COLOR-TEMP
D65
RETURN
SCALING AUTO
CALIBRATION
ITU-R BT.709
Gamma 2.4
LUMINACE
STANDARD
IMAGE ADJUST OFF
SATURATION 32
SHARPNESS 3
SAMPLE FORM
AUTO
INPUT RANGE
LIMITED2
DISPLAY RANGE
STANDARD
BRIGHTNESS
32
CONTRAST 20
COLOR-TEMP
D65
RETURN
SCALING AUTO
CALIBRATION
ITU-R BT.709
Gamma 2.4
LUMINACE
STANDARD
IMAGE ADJUST OFF
SATURATION 32
SHARPNESS 3
SAMPLE FORM
AUTO
INPUT RANGE
LIMITED2
16:9
AUTO
4:3
LET BOX
PTP
OVER SCAN
FULL SCEEN
CINE 1.3x
CINE 2x
DISPLAY RANGE
STANDARD
BRIGHTNESS
32
CONTRAST 20
COLOR-TEMP
D65
RETURN
SCALING
OVER SCAN
CALIBRATION
ITU-R BT.709
Gamma 2.4
LUMINACE
STANDARD
IMAGE ADJUST OFF
SATURATION 32
SHARPNESS 3
SAMPLE FORM
AUTO
INPUT RANGE
LIMITED2
Tabla de contenidos
Otros manuales de Monitor de Action
