4S002475 Magnetic Rowing Machine
Warnings
To reduce the risk of serious injury, read the entire manual before you assemble or
operate this rowing machine. In particular, please note the following safety precautions.
Please keep this manual in a safe place for future reference. Any defective components
should be replaced or repaired immediately and the rowing machine should not be used
until the repair has occurred.
WARNING: It is strongly recommended that you consult your physician prior to
beginning an exercise program. If dizziness, nausea, chest pains, or any other
abnormal symptoms are experienced while using this rowing machine, stop the
workout at once and consult a physician immediately.
1. It is the responsibility of the owner to ensure that all users of this rowing machine
are adequately informed of all warnings and precautions. This rowing machine is not
intended for use by persons with reduced physical, sensory or mental capabilities;
or lack of experience and knowledge unless they are being supervised by the person
responsible for their safety.
2. Keep children and pets away from this rowing machine at all times.
3. This rowing machine is not suitable for persons under the age of 15.
4. The maximum user weight for this rowing machine is 120kg, Class HC, speed-
independent system.
5. This rowing machine should be assembled by an adult. During assembly, keep
children away from the work area as this rowing machine contains small parts that
may cause a choking hazard.
6. Only use this rowing machine as described in this manual.
7. Place this rowing machine on a level surface with at least a 2m diameter of clear
space surrounding the unit. To protect your floor, it is recommended that you place an
anti-slip mat underneath the rower.
8. Keep the rowing machine indoors, away from moisture and dust. Do not put the
rowing machine in a garage, outbuilding, covered patio or near water.
9. Never allow more than one person to use the rowing machine at any time.
10. Always examine your rowing machine before use to ensure all parts are in working
order and all of the hardware is fitted tightly.
