11. CONTROLLER
G12 REMOTE CONTROLLER
Temperature Setting
xTo set the desired room
temperature, press the button to
increase or decrease the set
temperature.
xThe temperature setting range is
from 16qC to 30qC
xPress both buttons simultaneously
to toggle the temperature setting
between qC and qF
Turbo Mode
xPress the TURBO button to
achieve the required set
temperature in a short time.
ON Timer Setting
xPress the SET button will activate
the on timer function.
xSet the desired on time by pressing
the SET button continuously.
xPress the CLR button to cancel the
off timer setting
Sleep Mode
xPress the button to activate sleep
mode. This function is available
under COOL, HEAT & AUTO
mode.
xWhen it is activated in COOL
mode, the set temperature will be
increased 0.5qC after 30mins, 1qC
after 1 hour and 2qC after 2 hours.
xWhen it is activated in HEAT
mode, the set temperature will be
decreased 1qC after 30mins, 2qC
after 1 hour and 3qC after 2 hours.
Personalised Setting
xPress and hold the button for 3s to
initiate personalized setting.
xSet the individual setting e.g.
MODE, SET TEMP or FAN SPEED
and leave for 4s to save
x2 groups of settings are allowed to
stored in the handset
Fan Speed Selection
xPress the button until the desired
fan speed is achieved.
Operating Mode
xPress the MODE button to select
the type of operating mode.
xFor Cooling only unit, the available
modes are: COOL, DRY & FAN.
xFor Heatpump unit, the available
modes are: AUTO, COOL, DRY,
FAN & HEAT.
OFF Timer Setting
xPress the SET button will activate
the off timer function.
xSet the desired off time by
pressing the SET button
continuously.
xPress the CLR button to cancel the
off timer setting
Automatic Air Awing
xPress the SWING button to activate
the automatic air swing function.
xTo distribute the air to a specific
direction, press the SWING button
and wait until the louver move to
the desired direction and press the
button once again.
On/Off Button
xPress Once to start the air
conditioner
xPress again to stop the unit
Clock Time Setting
xPress button + or - to increase or
decrease the clock time.
Ionizer
xPress the button to activate the
negative Ion function, which will
refresh the indoor air effectively.
8
