Acqua GY-NE272TM Manual de usuario

REFRIGERATOR

INSTRUCTION MANUAL

GY-NE272TM

Contents

Brief introduction

CE notice

This product has been determined to be in compliance with the Low Voltage

Directive(2006/95/EC),the Electromagnetic Compatibility Directive(2004/108/EC)and

the Eco-Design Directive(2009/125/EC) implemented by Regulation(EC) No

643/2009 of the European Union

capabilities, or lack of experience and

knowledge, unless they have been

given supervision or instruction

concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to

ensure that they do not play with the

appliance.

Do not store explosive substances

such as aerosol cans with a flammable

propellant in this appliance.

WARNING—Keep ventilation openings,

in the appliance enclosure or in the

built-in structure, clear of obstruction.

WARNING—Do not use mechanical

devices or other means to accelerate

the defrosting process, other than those

recommended by the manufacturer.

WARNING—Do not damage the

refrigerant circuit.

WARNING—Do not use electrical

appliances inside the food storage

compartments of the appliance, unless

they are of the type recommended by

the manufacturer.

WARNING—When disposing of the

appliance do so only at an authorized

waste disposal centre. Do not expose to

flame.

WARNING—If the supply cord is

damaged, it must be replaced by the

manufacturer, its service agent or

similarly qualified persons in order to

avoid a hazard.

●

Thank you for your choosing our

products. We are sure you will find

your new appliance a pleasure to use.

Before you use the appliance, we

recommend that you read through

these instructions carefully, which

provides details about its usage and

functions.

Please ensure that all people using

this appliance are familiar with its

operations and safety features. It is

important that you install the appliance

correctly and pay attention to the safety

instructions carefully.

We recommend that you keep this

user's manual with the appliance for

future reference and retain it to any

future users.

This appliance is intended to be used

in household and similar applications

such as:

-Staff kitchen- areas in shops, offices

and other working environments;

-Farmhouses by clients in hotels,

motels and other residential types of

environment;

-Bed and breakfast type of

environments;

-Catering and similar non-retail

applications.

This appliance is not intended for use

by persons (including children) with

reduced physical, sensory or mental

●

Hisense Refrigerator

Brief introduction……………………….2

Important safety instructions…………3

Installing your new appliance………...4

Description of the appliance………….8

Control panel……………………...9

Using your appliance…………………10

Helpful hints and tips……………… 11

Cleaning and care……………………12

Troubleshooting………………………13

Disposal of the appliance……………15

●

Do not store explosive substances

such as aerosol cans with a ammable

propellant in this appliance.

WARNING—Keep ventilation openings,

in the appliance enclosure or in the

built-in structure, clear of obstruction.

WARNING—Do not use mechanical

devices or other means to accelerate

the defrosting process, other than those

recommended by the manufacturer.

WARNING—Do not damage the

refrigerant circuit.

WARNING—Do not use electrical

appliances inside the food storage

compartments of the appliance, unless

they are of the type recommended by

the manufacturer.

WARNING—When disposing of the

appliance do so only at an authorized

waste disposal centre. Do not expose

to ame.

WARNING—If the supply cord is

damaged, it must be replaced by the

manufacturer, its service agent or

similarly qualied persons in order to

avoid a hazard.

Before you use the appliance, we

recommend that you read through these

instructions carefully, which provides

details about its usage and functions.

Please ensure that all people using

this appliance are familiar with its

operations and safety features. It is

important that you install the appliance

correctly and pay attention to the safety

instructions carefully.

We recommend that you keep this

user’s manual with the appliance for

future reference and retain for any

future users.

This appliance is for use in domestic

households.

This appliance is not intended for use

by persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience

and knowledge, unless they have

been given supervision or instruction

concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to

ensure that they do not play with the

appliance.

Safety for children and infirm persons

Safety about electricity

●

Unpack the appliance and check

through the appliance. Should any

damage be evident, don't plug in the

appliance but contact the shop

immediately from which you purchased

it. Keep all packing materials in this

case.

We recommend that you wait for 4

hours before connecting the appliance

to allow the refrigerant to flow back into

the compressor.

The appliance must be applied with

single phase alternating current of

220~240V/50Hz. If the voltage

fluctuates exceeding the upper limit,

A.C. automatic voltage regulator of

more than 350W should be applied to

the refrigerator for safety use.

The mains plug must be accessible

when the appliance is installed.

This appliance must be earthed.

This appliance is fitted with a plug in

accordance with local standard. The

plug should be suitable for use in all

houses fitted with sockets in

accordance with current

specifications.

If the fitted plug is not suitable for

your socket outlets, it should be cut

off and carefully disposed of. To avoid

a possible shock hazard, do not insert

the discarded plug into a socket. If in

doubt contact a qualified, registered

electrician.

recommend that you follow the

guidelines below.

Store any food in accordance with the

storage instructions from the

manufacturer.

Don't try to repair the appliance

yourself. It is dangerous to alter the

specifications or modify this product in

any way. Any damage to the cord may

cause short circuit, fire or electric

shock.

Don't place too much food directly

against the air outlet on the rear wall of

both the refrigerator and freezer

compartment, as it affects sufficient air

circulation.

Don't place hot items near the plastic

components of this appliance.

Frozen food must not be refrozen

once it has been thawed out.

Don't store bottled or canned drinks

(especially carbonated drinks) in the

freezer compartment. Bottles and cans

may explode.

Do not consume ice popsicles or ice

cubes straight from the freezer as this

can cause freezer burn to the mouth

and lips.

●

Keep all packaging away from

children to avoid risk of suffocation.

Protect children from being scalded

by touching the very hot compressor at

This appliance can be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental capabilities

or lack of experience and knowledge if

they have been given supervision or

instruction concerning use of the

appliance in a safe way and

understand the hazards involved.

Children shall not play with the

appliance. Cleaning and user

maintenance shall not be made by

children without supervision.

●

To avoid the risks that are

always present when using an

electric appliance, we recommend that

you pay more attention to the

instructions about electricity below.

Hisense Refrigerator

Important safety instructions

●

It is important to use your

appliance safely. We

General safety and daily use

Don't place items on top of the

appliance as this could cause injury

should they fall off.

Never allow children to play with the

appliance by hanging or standing over

or on the doors, racks, shelves and

the rear bottom of appliance.

Refrigerant

Installing your new appliance

Ventilation of appliance

●

Before using the appliance for the first

time, you should be informed of the

following tips.

In order to improve efficiency

of the cooling system and save

energy, it is necessary to maintain

good ventilation around the appliance

for the dissipation of heat. For this

reason, sufficient clear space should

be available around the refrigerator.

Suggest :It is advisable for there to be

at least 75mm of space from the back

to the wall, at least 100mm from its

top,at last 100mm from its side to the

wall and a clear space in front to allow

the doors to open 135°. As shown in

following diagrams.

The refrigerant isobutene (R600a) is

contained within the refrigerant circuit

of the appliance, a natural gas with a

high level of environmental

compatibility, which is nevertheless

flammable. During transportation and

installation of the appliance, ensure

that none of the components of the

refrigerant circuit becomes damaged.

The refrigerant (R600a) is flammable.

Don't store products which contain

flammable propellants(e.g. spray cans )

or explosive substances in the

appliance.

Avoid opening flames(candles,

lamps etc.) and sources of ignition.

Thoroughly ventilate the room in

which the appliance is situated.

Should the refrigerant circuit be

damaged:

Switch off the appliance and

disconnect it from the mains power

before you clean or move it.

Never unplug the appliance by pulling

on the electrical cord. Always grip the

plug firmly and pull straight out from

the socket to prevent damaging the

power cord.

Do not operate the appliance without

the light cover of interior lighting.

Any electrical component must be

replaced or repaired by a qualified

electrician or authorized service

engineer. Only genuine spares should

be used.

Do not use extension cords or

multiple sockets which could cause

overloading of wiring circuits and could

cause a fire.

Always plug your appliance into its

own individual electrical socket which

has a voltage rating that matched the

rating plate.

Make sure that the plug is not

squashed or damaged. Otherwise, it

may cause short circuit, electric shock

or overheat and even cause a fire.

Do not insert the mains plug if the

socket is loose, there is a risk of

electric shock or fire.

Do not use electrical appliances such

as ice cream makers inside the food

storage compartments of the

Caution: risk of fire

Hisense Refrigerator

appliance, unless they are approved

by the manufacturer.

Do not look direct into the LED light

located in the refrigerator compartment

with optical instruments to avoid eye

injuries. If it is not functioning correctly,

consult a qualified, registered

electrician or replace it in accordance

with the “cleaning and care” chapter.

●

100

740 (C)

1301(A)

960(B)

Note:

This appliance performs well within

the climate class from N to T showed in

the table below.

●

top, at least 100mm from its side to the

wall and a clear space in front to allow

the doors to open 135°. As shown in

following diagrams.

Climate class Ambient temperature

+10°C to +32°C

+16°C to +32°C

+16°C to +38°C

+16°C to +43°C

It may not work properly if being left at

a temperature above or below the

indicated range for a long period.

Stand your appliance in a dry place to

avoid high moisture.

For sufficient leveling and air

circulating in the lower rear section of

the appliance, the bottom feet may

need to be adjusted. You can adjust

them manually by hand or by using a

suitable spanner.

To allow the doors to self-close, tilt

the top backwards by about 10mm.

Keep the appliance out of direct

sunlight rain or frost. Stand the

appliance away from heat sources

such as stoves, fires or heaters.

Leveling of appliance

●

Reversing the door

The side at which the door opens can

be changed, from the right side (as

supplied) to the left side, if the

installation site requires.

8mm socket wrench Cross-shaped screwdriver

8mm wrench

Thin-blade screwdriver

Note: Before you start lay the

refrigerator

gain access to the base you should

rest it on soft foam packaging or

similar material to avoid damaging

the backboard of the refrigerator To

reverse the door the following steps

are generally recommended

1. Stand the refrigerator upright

Open the upper door to take out all

door racks (to avoid rack sdamaged)

and then close the door

on its back in order to

≤10mm

Hisense Refrigerator

Tools you will need

Door racks

2. Stand the refrigerator upright, first

remove the screw cover and loose

the screw and unscrew the upper

hinge cover which is at the top right

corner of the refrigerator, and use a

putty knife or thin-blade screwdriver

to prize the screw hole cover which

is at the top left corner of the

refrigerator.

①

②

③

④

Warning! When reversing the door, the

appliance must not be connected to

the mains. Ensure that the plug is

removed from the mains socket.

Model AB

RT419N4CGN

RT295N4CGN

RT328N4CGN

1301 960

1172

938

740

670

Climate class Ambient temperature

+10°C to +32°C

+16°C to +32°C

+16°C to +38°C

+16°C to +43°C

It may not work properly if being left at

a temperature above or below the

indicated range for a long period.

Stand your appliance in a dry place to

avoid high moisture.

For sufficient leveling and air

circulating in the lower rear section of

the appliance, the bottom feet may

need to be adjusted. You can adjust

them manually by hand or by using a

suitable spanner.

To allow the doors to self-close, tilt

the top backwards by about 10mm.

Keep the appliance out of direct

sunlight rain or frost. Stand the

appliance away from heat sources

such as stoves, fires or heaters.

Leveling of appliance

●

Reversing the door

The side at which the door opens can

be changed, from the right side (as

supplied) to the left side, if the

installation site requires.

8mm socket wrench Cross-shaped screwdriver

8mm wrench

Thin-blade screwdriver

Note: Before you start lay the

refrigerator

gain access to the base you should

rest it on soft foam packaging or

similar material to avoid damaging

the backboard of the refrigerator To

reverse the door the following steps

are generally recommended

1. Stand the refrigerator upright

Open the upper door to take out all

door racks (to avoid rack sdamaged)

and then close the door

on its back in order to

≤10mm

Hisense Refrigerator

Tools you will need

Door racks

2. Stand the refrigerator upright, first

remove the screw cover and loose

the screw and unscrew the upper

hinge cover which is at the top right

corner of the refrigerator, and use a

putty knife or thin-blade screwdriver

to prize the screw hole cover which

is at the top left corner of the

refrigerator.

①

②

③

④

Warning! When reversing the door, the

appliance must not be connected to

the mains. Ensure that the plug is

removed from the mains socket.

Model AB

RT419N4CGN

RT295N4CGN

RT328N4CGN

1301 960

1172

938

740

670

Climate class Ambient temperature

+10°C to +32°C

+16°C to +32°C

+16°C to +38°C

+16°C to +43°C

It may not work properly if being left at

a temperature above or below the

indicated range for a long period.

Stand your appliance in a dry place to

avoid high moisture.

For sufficient leveling and air

circulating in the lower rear section of

the appliance, the bottom feet may

need to be adjusted. You can adjust

them manually by hand or by using a

suitable spanner.

To allow the doors to self-close, tilt

the top backwards by about 10mm.

Keep the appliance out of direct

sunlight rain or frost. Stand the

appliance away from heat sources

such as stoves, fires or heaters.

Leveling of appliance

●

Reversing the door

The side at which the door opens can

be changed, from the right side (as

supplied) to the left side, if the

installation site requires.

8mm socket wrench Cross-shaped screwdriver

8mm wrench

Thin-blade screwdriver

Note: Before you start lay the

refrigerator

gain access to the base you should

rest it on soft foam packaging or

similar material to avoid damaging

the backboard of the refrigerator To

reverse the door the following steps

are generally recommended

1. Stand the refrigerator upright

Open the upper door to take out all

door racks (to avoid rack sdamaged)

and then close the door

on its back in order to

≤10mm

Hisense Refrigerator

Tools you will need

Door racks

2. Stand the refrigerator upright, first

remove the screw cover and loose

the screw and unscrew the upper

hinge cover which is at the top right

corner of the refrigerator, and use a

putty knife or thin-blade screwdriver

to prize the screw hole cover which

is at the top left corner of the

refrigerator.

①

②

③

④

Warning! When reversing the door, the

appliance must not be connected to

the mains. Ensure that the plug is

removed from the mains socket.

Model AB

RT419N4CGN

RT295N4CGN

RT328N4CGN

1301 960

1172

938

740

670

NOTE: It is recommend that a registered

service agent carries out any door hinge

modication at the customers cost. Any

costs or subsequent damage that is

incurred to door modication will not be

covered under warranty.

3. Unscrew the flange screws which

are used for fixing the right upper hinge

part . Lift the upper door and place it

on a padded surface to prevent it from

scratching.

①

②

4. Remove the upper door and place it

on a smooth surface with its panel

upwards. Loose screws , detach

part , then install part to the left

side with screws

②

①①

②.

Note: Please hold the upper door by hand

during step 3 to prevent door dropping.

6. Place the lower door on a smooth

surface with its panel upwards.Loose

screws detach part Then install

part to corresponding position on left

side together with screws

②， ①.

①

②.

5. Loose screws used to fix the middle

hinge and remove middle hinge. Then

remove the lower door.

Hisense Refrigerator

②right upper hinge part

①flange screws

8. Place refrigerator flatwise, remove

part and then loose screws

Remove part and part

③ ④.

② ①.

③Upper hinge cover (right)

②screw

①Screw cover

④Screw hole cover

②-Self tapping screws

①Stop block

①

②

7. Change screw hole covers on

middle cover plate from left to right (as

shown in figure below).

②self-tapping screws

①Door holder

①

②

9. Screw out lower hinge, change it to

the near hole site, and then screw up

and mount washer.

10. Just remount to the step 8,change

part to left and part to right and then

fix them with screws Finally install

part

①②

④.

③.

11. Move the lower door and adjust its

position to align lower hole site and

upper hinge axis. Turn the middle

hinge by 180, change the washer on

the axis to the upper side, adjust the

middle hinge to the appropriate

position and then install it.

12. Screw out The upper hinge axis,

turn the upper hinge over and fix axis

on it. Then place it at side for use.

Hisense Refrigerator

Note: washer may

stick to lower door.

washer

②Front foot fixed board

④Self tapping screws-

③Adjustable bottom feet part

①Lower hinge part right（）

Lower hinge part (left)

Note: washer may

stick to lower door. Washer

13. Just remount to the step 2,change

upper hinge cover to left and fix them

with screws and then install the

screw cover Finally, change screw

hole cover to right .

③

②

①.

④

③Upper hinge cover (left)

②screw

①Screw cover

④Screw hole cover

①

②

③

④

14. Open the upper door, mount door

racks and then close it.

Description of the appliance

Hisense Refrigerator

GY-NE272TM

4. Twist

10.

11.

12.

13.

14. Moisture fresh

15.

16. Freezer door

17. U

18.

21.

23.

24.

25.

26.

Wind channel cover in freezer

Freezer temperature regulator

Freezer shelf

ice maker

Ice storage box

LED light

Fresh zone cover

Fresh zone drawer

Wind channel cover in refrigerator

Temperature controller

(in refrigerator chamber)

Refrigerator shelf

Humidity control sliding block

Crisper cover

crisper

Adjustable feet

pper Door switch

Rack on upper door

19. Freezer door seal

20. Fridge door seal

Upper rack

22.Egg tray (inside)

Small rack

Lower Door switch

Middle rack

Lower rack

27. Fridge door

View 1 of the appliance

Note: Due to unceasing modification of our products, your

refrigerator may be slightly different from this instruction

manual, but its functions and using methods remain the

same.

Control panel

High ambient temperatures (e.g. on hot

summer days) and a colder setting on the

temperature regulator can cause the

compressor to run continuously or even

non-stop!

So we do not advise the user set the

temperature control knob at “Colder”or

“Cold”in normal.

Reason: when the ambient temperature is

high, the compressor must run continuously to

maintain the low temperature in the appliance.

Temperature regulator in freezer

chamber

The temperature regulator allows you to

regulate the temperature inside the Freezer.

●

Use your appliance according to the

following control regulations, your

appliance has the corresponding

functions as the control panels showed

in the pictures below.

In case of too much frozen food or ice

making in chamber.

Please set the temperature control knob at

“Colder” position.

In case of using the refrigerator in usual

condition. Please set the temperature

regulator at “5” .

In case of a little frozen food in chamber.

Please set the temperature controller at

“Cold” position.

●

Important!

So we do not advise the user set the

temperature control knob at “Colder”or

“Cold” in normal.

When you turn the knob to "Cold” which can

lead to the more energy efficiency.

Otherwise, it would result the energy-

consuming.

Don't place too much food directly against

the air outlet of the temperature sensor part

in Wind channel cover of the refrigerator

compartment, as it affects that the

appliance can't operate correctly.

Hisense Refrigerator

Insufficient refrigeration in chamber.

Set the temperature controller at “Colder”.

Using the refrigerator in normal.

Set the temperature controller at “Mid”.

Important!

the air outlet of Temperature

sensor part in wind channel cover

of the refrigerator compartment

If the 4-star and 2-star are labeled inside

the upper door, then the freezer

compartment will consist of 2 sections. One

is the 4-star section and the other one is the

2-star section. As shown in the following

diagrams.

Control panel

High ambient temperatures (e.g. on hot

summer days) and a colder setting on the

temperature regulator can cause the

compressor to run continuously or even

non-stop!

So we do not advise the user set the

temperature control knob at “Colder”or

“Cold”in normal.

Reason: when the ambient temperature is

high, the compressor must run continuously to

maintain the low temperature in the appliance.

Temperature regulator in freezer

chamber

The temperature regulator allows you to

regulate the temperature inside the Freezer.

●

Use your appliance according to the

following control regulations, your

appliance has the corresponding

functions as the control panels showed

in the pictures below.

In case of too much frozen food or ice

making in chamber.

Please set the temperature control knob at

“Colder” position.

In case of using the refrigerator in usual

condition. Please set the temperature

regulator at “5” .

In case of a little frozen food in chamber.

Please set the temperature controller at

“Cold” position.

●

Important!

So we do not advise the user set the

temperature control knob at “Colder”or

“Cold” in normal.

When you turn the knob to "Cold” which can

lead to the more energy efficiency.

Otherwise, it would result the energy-

consuming.

Don't place too much food directly against

the air outlet of the temperature sensor part

in Wind channel cover of the refrigerator

compartment, as it affects that the

appliance can't operate correctly.

Hisense Refrigerator

Insufficient refrigeration in chamber.

Set the temperature controller at “Colder”.

Using the refrigerator in normal.

Set the temperature controller at “Mid”.

Important!

the air outlet of Temperature

sensor part in wind channel cover

of the refrigerator compartment

If the 4-star and 2-star are labeled inside

the upper door, then the freezer

compartment will consist of 2 sections. One

is the 4-star section and the other one is the

2-star section. As shown in the following

diagrams.

High ambient temperatures (e.g. on hot

summer days) and a colder setting on

the temperature regulator can cause

the compressor to run continuously or

even non-stop!

We do not advise the user set the

temperature control knob at “Colder”or

“Cold”in normal conditions.

Reason: when the ambient temperature

is high, the compressor must run

continuously to maintain the low

temperature in the appliance.

• In case of using the refrigerator in usual

condition. Please set the temperature

regulator at “5” .

Control panel

High ambient temperatures (e.g. on hot

summer days) and a colder setting on the

temperature regulator can cause the

compressor to run continuously or even

non-stop!

So we do not advise the user set the

temperature control knob at “Colder”or

“Cold”in normal.

Reason: when the ambient temperature is

high, the compressor must run continuously to

maintain the low temperature in the appliance.

Temperature regulator in freezer

chamber

The temperature regulator allows you to

regulate the temperature inside the Freezer.

●

Use your appliance according to the

following control regulations, your

appliance has the corresponding

functions as the control panels showed

in the pictures below.

In case of too much frozen food or ice

making in chamber.

Please set the temperature control knob at

“Colder” position.

In case of using the refrigerator in usual

condition. Please set the temperature

regulator at “5” .

In case of a little frozen food in chamber.

Please set the temperature controller at

“Cold” position.

●

Important!

So we do not advise the user set the

temperature control knob at “Colder”or

“Cold” in normal.

When you turn the knob to "Cold” which can

lead to the more energy efficiency.

Otherwise, it would result the energy-

consuming.

Don't place too much food directly against

the air outlet of the temperature sensor part

in Wind channel cover of the refrigerator

compartment, as it affects that the

appliance can't operate correctly.

Hisense Refrigerator

Insufficient refrigeration in chamber.

Set the temperature controller at “Colder”.

Using the refrigerator in normal.

Set the temperature controller at “Mid”.

Important!

the air outlet of Temperature

sensor part in wind channel cover

of the refrigerator compartment

If the 4-star and 2-star are labeled inside

the upper door, then the freezer

compartment will consist of 2 sections. One

is the 4-star section and the other one is the

2-star section. As shown in the following

diagrams.

Temperature regulator in freezer

chamber

The temperature regulator allows you

to regulate the temperature inside the

Freezer.

If your unit is full of food or ice making

in chamber. Please set the temperature

control knob at “Colder” position.

If your unit has little frozen food in

chamber. Please set the temperature

controller at “Cold” position.

Important!

So we do not advise the user set the

temperature control knob at “Colder”or

“Cold” in normal conditions.

When you turn the knob to “Cold” it

may lead to the unit being more energy

efcient, otherwise, it may result with

energy consumption.

Important!

Don’t place too much food directly

against the air outlet of the temperature

sensor part in Wind channel cover

of the refrigerator compartment, as it

affects the operation of this appliance.

Humidity control sliding block

Crisper Cover

Crisper

Using your appliance

Your appliance has the accessories as the Description of the

appliance”showed in general with this part instruction you can have the right

way to use them

Door rack

It is suitable for the storage of eggs,

canned liquid, bottled drinks and

packed food, etc. Do not place too

many heavy things in the racks.

Small rack on lower door can be

placed at different heights according to

your requirements. Please take food

out of the shelf before lifting vertically

to reposition.

●

Note:

Shelf in Refrigerator chamber

There are egg trays in the upper

shelf and bottle holder in the lower

shelf.

There are shelves in refrigerator

chamber, and they can be taken out to

be cleaned.

●

Hisense Refrigerator

Fresh zone drawer

The temperature there is about

2~3 lower than other regions in the

℃

refrigerator chamber

It is used to store fish, meat and

other erodible food.

●

Crisper Humidity control

The crisper, mounted on telescopic

extension slides, is for storing

vegetables and fruits. You can adjust

the humidity inside by using the sliding

block.

The sliding block on crisper cover

can slide to left or right and the air hole

become more or less relatively. More

air hole opening means less humidity

and less means more humidity.

We recommend that you store

vegetables with more humidity and

fruits less humidity.

and

It is for controlling the temperature of

the crisper and the avoiding the

vegetable losing moisture.

When you remove the crisper, pull

them forward, then lift the crisper off

the slides. Remember to empty food in

the crisper firstly. Once you have

removed the drawers, ensure the

slides are pushed back fully.

Crisper Cover

Moisture fresh crisper

It is suitable for storage fruits and

vegetable.

The sliding block on crisper cover

can slide to left or right and the air hole

becomes more or less relatively. More

air hole opening means less humidity

and less means more humidity.

Tabla de contenidos

Otros manuales de Refrigerador de Acqua

Acqua

Acqua GY-NE250RF Manual de usuario

Acqua

Acqua GY-NE42RFW Manual de usuario

Acqua

Acqua GY-NE325RFW Manual de usuario

Acqua

Acqua GY-NE42RFS Manual de usuario

Acqua

Acqua GY-NE350RF/01 Manual de usuario

Acqua

Acqua GY-NE42RFW Manual de usuario

Acqua

Acqua GY-NE350RF Manual de usuario

Acqua

Acqua GY-NE255FR Manual de usuario

Acqua

Acqua GY-NE250RF Manual de usuario

Acqua

Acqua GY-NE242RF Manual de usuario

Manuales populares de Refrigerador de otras marcas

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Manual de usuario

Sharp

Sharp SJ-BA31IEXW2-EU Manual de usuario

CORBERO

CORBERO CC2300MCW Manual de usuario

KitchenAid

KitchenAid 2205264 Manual de usuario

Stengel

Stengel KU 1101 A++ Manual de usuario

NEFF

NEFF KI181 Series Manual de usuario

Hoshizaki

Hoshizaki Reach-In Manual de usuario

Amana

Amana ASD2524VES00 Manual de usuario

BOMANN

BOMANN KGC 213 Manual de usuario

Danby

Danby DAR044A1SLDD Instrucciones de montaje

Samsung

Samsung RF323TE Manual de usuario

Beko

Beko CSA31022 Manual de usuario

IKEA

IKEA FROSTIG C 185 E Manual de usuario

Electrolux

Electrolux ER 6821 D Manual de usuario

True

True TS-28 Manual de usuario

Frigidaire

Frigidaire FSC23R5DW9 Manual de usuario

Beko

Beko LSP4579W Manual de usuario