Acoustic Energy AELITE THREE Manual de usuario

Congratulations on choosing the Acoustic Energy AELITE

Three, a powerful floor standing, three-way loudspeaker

which features metal diaphragm technology and is capable

of outstanding performance. Please take a few moments

to read this manual. The advice it contains will enable you

to get the very best performance out of your Acoustic

Energy loudspeakers.

The AELITE Three utilises metal cone mid-bass drive unit

technology, proven in the AE Reference Series. The rigid anodised

alloy conesensure pure piston action and also acts as a heat sink

for the bonded voice coil. These features provide exceptional

clarity, transparency, dynamics and power handling. The units are

housed within vented aluminium chassis reducing stray magnetic

flux to a minimum and increasing power handling.

The tweeter - or treble driver - is a high-quality neodymium unit

with a silk fabric dome integrating smoothly with the rest of the

system.

All drive units are fully magnetically shielded so that the speakers

can be used in close proximity to a TV screen or monitor for AV

applications.

The Acoustic Energy AELITE Three loudspeaker uses quality OFC

internal wiring, which enhances detail and transparency.

The AELITE Threes are best heard with the tweeters at, or just

below, ear height when the listener is seated. For serious listening

the grilles are best removed.

Rigid support is essential for the speaker to develop its full detail

and dynamic performance. It is essential that the plinth supplied

is fitted using the four screws provided. This is best acheived by

standing the speaker on its top giving good access to the pre-

Closeness to room boundaries has a major impact on the low

frequency performance. The speakers should be kept away from

corners (which will produce booming). The speakers can be

positioned fairly close to a back or side wall but should not be the

same distance off the ground as they are from the rear or side wall.

Positioning

Introduction

spikes to make sure the speaker is as stable as possible. Once achieved

are from the listening position.

Trust your own ears for the best listening position.

Carefully turn the speaker over so it is in its correct orientation

spikes (with lock nut on) should be threaded in to each corner.

drilled pilot holes. Once the plinth is attached then the supplied

For best stereo imaging the speakers should be as far apart as they

When the best position has been established then use the adjustable

and place in the desired position.

fix spikes in place using the locknuts

Bi-amping

Bi-amping adds a second amplifier to the system. One power

amplifier drives the treble section of both loudspeakers; a second

drives the mid/bass sections. Note that the shorting links

must be removed. Failure to do so will result in damaging

the amplifiers.

As regards the loudspeakers, wiring for bi-amping is achieved in

much the same way as bi-wiring. Treble

amplifier positive (red)

terminals should be connected via the

ribbed cable to the positive (red) HF

terminal on the speaker. Similarly, treble

amplifier negative is connected to the

negative (black) HF terminal on the

speaker. Repeat this process with the

mid/bass amplifier and LF terminal pair.

After wiring up

Lower the volume to the

minimum, switch on the

amplifier, select the signal

source and then raise the

volume to the listening

level required.

AMPLIFIER

LEFT SPEAKER

RETAIN LINKS

FOR FUTURE USE

MAIN

Check that your amplifier is switched off before installing your

loudspeakers. Failure to do so may result in speaker or amplifier

damage. The diagram illustrates one loudspeaker only.

Conventional

Normal passive wiring requires shorting links to be in place

between the treble and mid/bass sections. The positive (ribbed)

cable from the amplifier positive (or red) terminal should connect

with the positive (red) terminal on the loudspeaker. Similarly the

negative (smooth) cable should connect the amplifier negative

terminal (black) to the negative terminal (black) on the loudspeaker.

Bi-wiring

Bi-wiring separates the bass and treble ground paths in the

loudspeaker and offers sound quality advantages. An extra set of

cables is required. Note that the shorting links are removed between

the treble and mid/bass sections and should be stored for later use if

conventional, passive driving is required.

Two pairs of cables are connected to the amplifier terminals. One

cable of each pair should connect to the treble section and one to

the mid/bass section. The positive (ribbed) cables from the

amplifier positive (or red) terminal should connect with the positive

(red) terminals on the loudspeaker. Similarly the negative (smooth)

cables in each pair should connect the amplifier negative terminal

(black) to the negative terminals (black) on the loudspeaker.

Connection

HF unit

Neodynium tweeter with high

dispersion 25mm diaphragm.

Ferro fluid cooled and damped.

Magnetically shielded. Exclusively

profiled aluminium front plate.

LF units

Twin Pure piston 110 mm drivers

with 32mm voice coils, Die-cast

aluminium chassis, high power,

long-throw magnet systems and

alloy cones. Magnetically shielded.

Crossover

@ 3.3 kHz, 3rd order, high power.

Power Handling

175W max (undistorted program

drive)

Frequency response ±6dB

34Hz to 27kH

Frequency response ±3dB

40Hz to 24kHz

Sensitivity

89 dB/W/M

Impedance

8 ohm

Cabinet

Real wood veneered. 15 mm MDF

wall. Twin vented vertical bracing.

High power, back firing, low

turbulence bass reflex port. 22 mm

MDF front baffle.

Terminals

Gold-plated, Bi-wireable.

Weight (excl. packaging

)18 kg each

Dimensions

(WxHxD) 230 x 920 x 297 mm

Your Acoustic Energy loudspeakers are guaranteed against original defects in

materials, manufacture and workmanship for 3 years from the date of

purchase. Please retain all original packaging materials for possible future use.

We suggest that you complete details of purchase now and keep this

information in a safe place for future reference.

Under this warranty Acoustic Energy agrees to repair any defect or, at the

company’s discretion, replace the faulty component(s) without charge for parts

or labour. This warranty does not imply any acceptance by Acoustic Energy or

its agents for consequential loss or damage and specifically excludes fair wear

and tear, accident, misuse or unauthorised modification.

This warranty is applicable in the United Kingdom only and does not in any

way limit the customer’s legal rights. Claims and enquiries under the warranty

for AE products purchased outside the UK should be addressed to the local

importers or distributors.

If you have reason to claim under the warranty please contact your dealer in

the first instance.

Dealer’s name:........................................................................................................

Address:.........................................................................................................

.....................................................................................................................

Date of purchase:....................................................................................................

Serial numbers:.......................................................................................................

Acoustic Energy Limited

16 Bridge Road, Cirencester

Gloucestershire GL7 1NJ

Tel +44(0)1285 654432

Fax +44(0)1285 654430

Web: www.acoustic-energy.co.uk

Specifications Warranty

MF units

Pure piston 110mm driver with

a 32mm short-throw voice coil,

Die-cast aluminium chassis, high

power, shielded magnet system.

Tabla de contenidos

Otros manuales de Oradores de Acoustic Energy

Acoustic Energy

Acoustic Energy 100 Series Manual de usuario

Acoustic Energy

Acoustic Energy AEG05/P5 Manual de usuario

Acoustic Energy

Acoustic Energy Radiance 1 Manual de usuario

Acoustic Energy

Acoustic Energy Aego P5 Manual de usuario

Acoustic Energy

Acoustic Energy 3 Series Manual de usuario

Acoustic Energy

Acoustic Energy 500 Series Manual de usuario

Acoustic Energy

Acoustic Energy Compact-1 Manual de usuario

Acoustic Energy

Acoustic Energy Aego M Manual de usuario

Acoustic Energy

Acoustic Energy Aelite Two Manual de usuario

Acoustic Energy

Acoustic Energy AEGIS TWO Manual de usuario

Acoustic Energy

Acoustic Energy Aegis Evo Series Manual de usuario

Acoustic Energy

Acoustic Energy AE1 Classic Manual de usuario

Acoustic Energy

Acoustic Energy AESPRIT 307 Manual de usuario

Acoustic Energy

Acoustic Energy Linear One Manual de usuario

Acoustic Energy

Acoustic Energy Professional Series AE22 Manual de usuario

Acoustic Energy

Acoustic Energy AE1 Classic Manual de usuario

Acoustic Energy

Acoustic Energy AELITE on-wall Manual de usuario

Acoustic Energy

Acoustic Energy Aelite Instrucciones de instalación

Acoustic Energy

Acoustic Energy 101 Manual de usuario

Acoustic Energy

Acoustic Energy AE29-06C Instrucciones de funcionamiento

Acoustic Energy

Acoustic Energy 100 Series Manual de usuario

Acoustic Energy

Acoustic Energy AEGIS CENTRE Manual de usuario

Acoustic Energy

Acoustic Energy AE1 Classic Manual de usuario

Acoustic Energy

Acoustic Energy Aegis Neo One Manual de usuario

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario