Acnodes FES9300 Manual de usuario
The system comes with various mounting options such as DIN-rail and wall-mount
bracket. DIN-rail mount clip isshipped with FES9300 as standard mounting option.
Two optional mounting brackets, WM-1300V and WM-1300H, are available for wall-
mount applications.
DIN-Rail Mount Clip
FES9300 Mounting Installation Guide
Wall Mount Bracket (WM-1300V)
FES9300 Mounting Installation Guide
Wall Mount Bracket (WM-1300H)
FES9300 Mounting Installation Guide
DIN Rail Installation
The DIN rail iseasy to install and it is a convenient way to position the system. The
Din rail has been proven to be most beneficial in the industrial environment where
space is limited. The mount plate comes with two M4 screws. Please refer to the
illustrationsbelow toinstall the DIN clip/ rail.
1. To install, secure the DIN rail clip onto the rear of the system enclosure using
the M4 screws provided.
FES9300 Mounting Installation Guide
2. To install the mount plate onto the DIN rail, you must come over the top of the
DIN rail, tilting downwards, overlap the top clip edge of the mount plate onto the
DIN rail first, then firmly press the bottom-front of the enclosure to clip the
bottom edge of the mount plate.
3. Confirm the mount plate has indeed clipped onto the DIN rail for proper fit to
complete the installation.
FES9300 Mounting Installation Guide
Wall Mount Bracket Installation (with WM-1300V)
1. To install the full size wall mount bracket, locate a flat surface area (wall, ceiling,
etc.) free from obstructions that meets the following dimensions.
FES9300 Mounting Installation Guide
2. To install, simply secure WM-1300V wall mount bracket with the four M4 screws
supplied onto the enclosure shown below.
3. Once the wall mount bracket has been installed, it is ready to be secured onto
the dedicated location.
FES9300 Mounting Installation Guide
Wall Mount Bracket Installation (with WM-1300H)
1. To install the full size wall mount bracket, locate a flat surface area (wall, ceiling,
etc.) free from obstructions that meets the following dimensions.
FES9300 Mounting Installation Guide
2. To install, simply secure the WM-1300H wall mount bracket with the four M4
screws supplied onto the enclosure shown below.
FES9300 Mounting Installation Guide
3. Once the full size wall mount bracket has been installed, it is ready to be
secured onto the dedicated location.
FES9300 Mounting Installation Guide
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Manuales populares de PC industrial de otras marcas
Dell
Dell Embedded Box PC 5000 Manual de usuario
IBASE Technology
IBASE Technology ASB200-918 Series Manual de usuario
Lenovo
Lenovo ThinkCentre M90q Manual del propietario
IXXAT
IXXAT Econ 100 Manual de usuario
Kontron
Kontron KBox A-151-TGL Manual de usuario
AXIOMTEK
AXIOMTEK ICO500-518 Series Manual de usuario