Acer Liquid Leap Manual de usuario
User’s Manual
2 -
© 2014 All Rights Reserved
Acer Liquid Leap User’s Manual
Model: W1
This revision: October 2014
Acer Liquid Leap
Model number: _______________________________________________
Serial number: _______________________________________________
Date of purchase: ____________________________________________
Place of purchase: ___________________________________________
Google Play is a trademark of Google Inc.
For more information, please visit: http://go.acer.com/liquidleap.
Important
This manual contains proprietary information that is protected by
copyright laws. The information contained in this manual is subject to
change without notice. Images provided herein are for reference only
and may contain information or features that do not apply to your
device. Acer Group shall not be liable for technical or editorial errors or
omissions contained in this manual.
Table of contents - 3
TABLE OF CONTENTS
Setting up 4
Unpack your Liquid Leap......................... 4
Charge the battery ...................................... 4
Securing the wristband ............................ 6
Care and wearing tips ................................. 7
Use with an Android phone 8
Install Acer Leap Manager....................... 8
Download the app ....................................... 8
Set up the app............................................. 8
Pair your Leap and phone ....................... 9
Sync with the app...................................... 10
Change notification settings...................... 11
Use with an iPhone 12
Install Acer Leap Manager..................... 12
Download the app ..................................... 12
Set up the app........................................... 12
Pairing your Leap and phone................. 13
Sync with the app ..................................... 14
Changing notification settings................... 15
Using the Liquid Leap armband 16
Onscreen information ............................... 16
Troubleshooting 18
Specifications......................................... 20
Display ...................................................... 20
Waterproof certification............................. 20
Sensor ...................................................... 20
Battery ...................................................... 20
System requirements................................ 20
Dimensions ............................................... 20
Weight....................................................... 20
End User License Agreement 21
4 - Setting up
SETTING UP
Unpack your Liquid Leap
Your new smartphone accessory comes packed in a protective box.
Carefully unpack the box and remove the contents. If any of the
following items is missing or damaged, contact your dealer
immediately:
• Your new Acer Liquid Leap
• Charging cradle
•QuickGuide
• Safety leaflet
• Warranty card
• USB cable
Charge the battery
For initial use, you need to charge your Leap fully. It takes
approximately four hours to fully charge the Leap. Once it has
charged for the first time, you can charge it as necessary.
1. Open the charging cradle and place the Leap into the cradle, lining
up the charging connectors.
Setting up - 5
2. Close the cradle.
3. Connect the cradle to your computer using the supplied USB cable.
You can keep track of the charge progress on the screen.
1
2
Note
Double-tap the screen to see the charge level.
6 - Setting up
Securing the wristband
1. Put on the wristband as illustrated.
2. Align both ends of the wristband so they are directly overlapping
each other with the clasp over the two holes that best fit your wrist.
Setting up - 7
3. Squeeze both the clasp and the wristband between your thumb and
forefinger until the wristband is properly secured.
You’ll know your Leap wristband is securely fastened if both tabs on
the clasp are fully inserted into the wristband.
Care and wearing tips
Keep the following tips in mind when caring for your Leap:
• Clean and dry the device regularly, particularly under the band.
• Wear it loosely enough to allow air circulation.
• Use skin care products sparingly on the areas of the wrist covered
by the device.
• If you notice any signs of skin irritation or experience any discomfort,
please discontinue use.
Note
The metallic band below the screen should be facing towards you
when looking at the screen.
8 - Use with an Android phone
USE WITH AN ANDROID PHONE
Install Acer Leap Manager
Download the app
Open Google Play and search for Acer Leap Manager. Download
and install the app.
Set up the app
Once you have installed the app, you will need to create an account to
complete setup. You can either log in using your Facebook username
and password, or create a new account.
Sign in using Facebook credentials
1. Tap Connect with Facebook.
2. Enter your Facebook login details.
Note
The Leap requires a smartphone that supports Bluetooth 4.0 and Android
4.4. Check that your phone meets these requirements before downloading
and installing the app.
Acer does not guarantee that the Leap will work correctly with devices that
have not been tested by Acer. A list of tested devices is available on the Acer
website, which can be viewed by scanning the QR code on the Leap box.
Note
Unlike most Bluetooth accessories, like headsets, your Leap must be paired
directly through the app, not through your device’s Bluetooth Settings.
Use with an Android phone - 9
Create a new account
1. Tap Sign Up for New Users.
2. Enter a username and password and the other details requested.
Pair your Leap and phone
Once you have set up the app, you will need to pair it with your Leap.
1. Turn on your phone’s Bluetooth from Settings> Bluetooth.
2. Connect your Leap to its charger cradle.
3. Turn on Acer Leap Manager.
4. Tap Device from the menu (accessible by tapping the Menu icon in
the upper left-hand corner).
5. Acer Leap Manager will search for available devices.
10 - Use with an Android phone
6. Four characters will be displayed on the Leap screen, enter these
characters into Acer Leap Manager when requested.
Once Acer Leap Manager has connected to your Leap and any
necessary updates completed, you will see the main screen.
How do I set my goals?
To change your goals, open the menu from the Leap Manager home
screen and tap Goals. Tap the goal you wish to set, enter the new
value, and then tap Done.
Sync with the app
Your Leap can sync directly via Bluetooth. Syncing will occur
automatically when you open Acer Leap Manager, as long as
Bluetooth is enabled in the Android device settings.
Note
If necessary, your Leap firmware will be updated. This may take some time.
Be careful to keep your Leap close to your smartphone until the update is
complete.
Otros manuales para Liquid Leap
1
Tabla de contenidos
Idiomas:
Otros manuales de Rastreador de actividad física de Acer
