Acer LS830 Manual de usuario
USER MANUAL
4G FIXED WIRELESS PHONE
Model No.: LS830
It is strongly recommended reading user manual before using this device.
Index
Safety, regulatory and legal information
Start to use
First look
Home screen, apps, and notification
Make a call
Operations during a call
Contacts
Settings-Network
Settings-Device
Trouble shooting and tips
Safety, regulatory and legal information
Thanks for choosing LS830, a Fixed Wireless phone support LTE/UMTS/GSM network and Android
smart OS enriching the diversified desktop applications. A valid SIM card from your network operator
is required before you enjoy it.
Battery:
The device contains a Li-on Polymer battery of 4000mAh capacity.
Don’t try to open the battery yourself. Attempting to disassemble the battery may cause burning and
injury.
Don’t crush, bend, or expose the battery to heat or liquid. This may damage the battery and may
cause burning and injury.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Power Adaptor:
Always use original power adaptor with the device. Unqualified 3rd party power adaptor may damage
this device and may cause burning and injury.
Operating Environments:
Respect special regulations in force in any area, and always switch off your device when its use is
prohibited, or if it could cause danger. When connecting the phone or any accessory to another
device, read the user manual for detailed safety instructions. Do not connect incompatible products. It
is recommended that the equipment should only be used in the normal position for proper operation
and personnel safety.
The device operates at the environment temperature -10℃~ +45 ℃ or 14℉~ 113℉. The usage out
of this temperature range may damage the device and may meet device auto power off.
Medical Devices:
Most medical devices can be protected from the RF signal of LS830, but not all of them. If you have
any questions or need more information, consult your doctor or the manufacturer of your medical
device.
High Volume Usage:
Exposure to loud noise from any source for extended periods of time may affect your hearing. The
louder the sound, the less time is required before your hearing could be affected. To protect your
hearing:
Limit the amount of time you use handsets or headphones at high volume.
Avoid turning up the volume to block out noisy surroundings.
Turn the volume down if you can’t hear people speaking near you.
If you experience hearing discomfort, including the sensation of pressure or fullness in your
ears, ringing in your ears, or muffled speech, you should stop listening to the device through
the handset or headphones and have your hearing checked.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Start to use
Follow the steps shown below
1. Turn LS830 device upside down.
2. Push the button and pull out battery door as the picture shown.
3. Insert SIM card.
Follow the arrow indication to open the connector;
Insert SIM card;
Push connector the opposite direction to lock.
4. Insert an optional memory card.
5. Put in battery and lock battery door to its original position.
6. Insert power adaptor till you see blue color LED light indication.
7. Insert curly cable in the device as well as handset.
First look
Front View
Rear View
Part list
Home screen, apps and notification
The home screen is what user see firstly when the device is turned on. From here, User may
access frequently used apps and the quick settings.
Press and hold the screen to change favorite apps,wallpapers and widgets.
Make a call
User may make a call through three optional activities:
Press ‘Dial Key’
Press ‘Number Keys’
Press ‘Handsfree Key’
A dial pad will appear on the screen. In case of error number input, User may press ‘ ’ to
correct.
Be noted that the user need to press ‘Dial Key’ after finishing numbers input to make a call.
Call from handset:
On home screen, the user may pick up handset directly to enter dial pad. There will be
ringing notice from handset earpiece till User press any key. After finish numbers input, User
need to press ‘Dial key’ to make a call.
Call in Handsfree mode:
Once User press any ‘Number Key’, ‘Dial Key’ or ‘Handsfree Key’, the device will enter
dial pad in handsfree mode. There will be ringing notice from loud speaker till User press any key.
After finish numbers input, User need to press ‘Dial key’ to make a call.
Answer an incoming call:
Once there is an incoming call, User may answer the call by taking handset or pressing ‘Dial
Key’ to answer the call. User may reject the call by pressing ‘End Call Key’.
Operations during a call
.
Call interaction in application progress
Once a call incomes in progress of some application, for example Internet Radio, notification will
appear on the screen.
Reject call:
Press ‘End Call key’ or the ‘DISMISS’ icon on the screen.
Call will be rejected and on hold application will resume.
Some applications will be in pause status for user to activate again.
Accept call
User press ‘Dial key’, ‘ANSWER’ icon on the screen, or pick up ‘Handset’. Incoming
call will be accepted and application will be put on hold.
Some applications will resume as soon as call ending while other applications request user to
activate again.
End a call
After finish a call , User press ‘End Call key’ or put down Handset to end the call process.
In some VOIP application, example SKYPE, does not recognize LS830 hard keys. Once User
press ‘End Call key’ or put down Handset, VOIP call will be put to background instead of
ending this VOIP call. User should press ‘End Call Icon’ on the application screen interface.
Call modes
LS830 device supports Handset, Handsfree, Headset and Bluetooth mode for voice
communication. Please note that User should have a CTIA standard cable headset or Bluetooth
headset, which is excluded from sales box, to use the optional Headset mode or Bluetooth mode.
Handset switch to Handsfree:
During a call in Handset mode, press ‘Handsfree key’ and put down the Handset. This call will
switch to Handsfree mode.
User takes up the Handset again then this call will switch from Handsfree to Handset mode.
Handsfree switch to Handset:
During a call in Handsfree mode, the device will switch to Handset mode once User takes up the
Handset.
Headset mode switch:
During a call in Headset mode, the device will change to Handset mode once User plugs out the
headset. User need to pick up the Handset to continue this call or press ‘Handsfree key’ to
switch to Handsfree mode.
Contacts
User may get contact list directly in the home screen by pressing the icon ‘Contacts’.
To add contacts to a new device may choose two options:
Contacts Synchronization
Press the icon ‘ADD ACCOUNT’ to synchronize contacts saved in cloud server, for example
Google account or MS Exchange server account.
Import Contacts file from Memory
Press the icon ‘IMPORT CONACTS’ to import contacts file from the device storage.
Import Single Contact
Press the icon to add a single Contact.
After fill in the Contact information, press the icon on top of screen to finish.
Tabla de contenidos
