Accelerated Dial-to-IP 5301-DC Manual de usuario
Accelerated Concepts, Inc. ©2016 Version 20160815 5301-DC User’s Guide
©2016 Accelerated Concepts, Inc. All rights reserved. Accelerated Concepts, the Accelerated
logo and all other Accelerated Concepts marks contained herein are trademarks of Accelerated
Concepts. All other marks contained herein are the property of their respective owners.
Images are shown for illustrative purposes only; individual experience may vary.
Accelerated 5301-DC
Dial-to-IP™Converter
User’s Guide
Connected is Everything™
Accelerated Concepts, Inc. ©2016 5301-DC User’s Guide
ACCELERATED.COM
Preface
Accelerated Concepts reserves the right to revise this publication and
to make changes in the content thereof without obligation to notify
any person or organization of any revisions or changes.
©2016 Accelerated Concepts, Inc. All rights reserved. Accelerated Concepts, the Accelerated
logo and all other Accelerated Concepts marks contained herein are trademarks of Accelerated
Concepts. All other marks contained herein are the property of their respective owners.
Images are shown for illustrative purposes only; individual experience may vary.
Accelerated Concepts, Inc. ©2016 5301-DC User’s Guide
ACCELERATED.COM
WARNING
WARNING
CAUTION
THE UNIT MUST BE POWERED OFF WHERE BLASTING IS IN
PROGRESS, WHERE EXPLOSIVE ATMOSPHERES ARE PRESENT,
OR NEAR MEDICAL OR LIFE SUPPORT EQUIPMENT. DO NOT
POWER ON THE UNIT IN ANY AIRCRAFT.
CA PROP 65 WARNING: THIS PRODUCT CONTAINS CHEMICALS
KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER,
BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
BY PRESSING THE ERASE BUTTON WHEN POWERED UP,
THE CONFIGURATION OF THE 5400-RM IS ERASED AND THE
UNIT IS REVERTED TO FACTORY DEFAULT SETTINGS.
Accelerated Concepts, Inc. ©2016 5301-DC User’s Guide
ACCELERATED.COM
Contents
What’s in the Box................................................................................ 4
Exchanging Power Tips ....................................................................... 5
Inserting in Desktop Stand.................................................................. 6
Setup................................................................................................... 7
Troubleshooting .................................................................................. 8
Configuring Device.............................................................................. 9
Advanced Configuration Using Accelerated View™............................ 10
Viewing & Editing Configuration........................................... 10
Upgrading Firmware.............................................................. 11
Managing Device Locally.................................................................... 12
Connecting to the Device ...................................................... 12
Manually Configuring PC to Connect to Device...13-14
Logging into Device.................................................. 15
Manual Firmware Update...................................................... 16
Configuring a Static IP Address........................................ 17-19
Specifications...................................................................................... 20
Indicator Light Colors.......................................................................... 21
Regulatory Guide................................................................................. 22
End User Agreement.......................................................................23-24
Technical Support................................................................................ 25
Accelerated Concepts, Inc. ©2016 5301-DC User’s Guide 4 of 25
ACCELERATED.COM
Model 5301-DC
Universal Power Supply Unit
with exchangeable tips
Phone Cord Cable
Velcro Strips 5301-DC Welcome Card
Desktop Stand Ethernet Cable
What’s in the Box
Accelerated Concepts, Inc. ©2016 5301-DC User’s Guide 5 of 25
ACCELERATED.COM
Exchanging Power Tips
The 5301-DC comes with a universal power supply unit (PSU) and four interchangeable plug tips that allows the PSU
to operate in most countries. The PSU comes with the United States style plug installed.
To change the plug tip:
Accelerated Concepts, Inc. ©2016 5301-DC User’s Guide 6 of 25
ACCELERATED.COM
Inserting in Desktop Stand
The desktop stand that is included with the 5301-DC will only fit onto the unit one way.
Accelerated Concepts, Inc. ©2016 5301-DC User’s Guide 7 of 25
ACCELERATED.COM
Setup
When setting up the 5301-DC follow these steps:
1. Connect the phone cord from the phone port (OUT) on dial-up device to
the phone port on the 5301-DC.
2. Connect the Ethernet cable from the Ethernet port on 5301-DC to a
Ethernet port on your router or modem, or simply plug your LAN Ethernet
cable into the 5301-DC.
3. Connect the Universal Power Supply unit to the power (PWR) port
of the 5301-DC.
4. During start up the 5301-DC’s indicator light will initially be solid amber
for 30-60 seconds and change to blinking amber for 10-30 seconds while
searching for an Ethernet connection. Once a Ethernet connection is
established the indicator will change to solid green.
5. Turn on your dial-up device and initiate dialing.
6. Once dial out is initiated, the Indicator Light will blink magenta.
7. When the connection is established and the data is being transferred,
the Indicator Light is solid magenta.
8. When the transfer of data is completed, the Indicator Light changes
back to a solid green.
Note: The Phone port of the 5301-DC must never be connected to the public
telephone network and should only be connected to your dial-up device.
5301-DC Converter
Phone line / device
Internet Router
Ethernet Cable
Phone Cord
LINE
Accelerated Concepts, Inc. ©2016 5301-DC User’s Guide 8 of 25
ACCELERATED.COM
Troubleshooting
In the event that you are not able to get a solid green Indicator Light during setup:
1. Check the device has power by confirming that the indicator light is lit in any color.
2. Confirm that the included power supply is being used and the outlet it is plugged into has power.
In the event the Indicator Light continues to blink amber during setup:
1. Confirm the network you are connecting to is active by connecting and testing another Ethernet capable
device (such as your laptop).
section Configuring a Static IP Address for more information.
3. Confirm the router you are connecting to is functioning correctly.
4. Confirm you have the Ethernet cable plugged into the correct ports (see Figure 1)
5. Change to a different Ethernet cable.
6. Turn the 5301-DC off, wait 5 seconds, and then turn the device back on again.
7. As a last resort, to reset the device to factory default settings, use the end of a paperclip to press the
RESET switch on the rear of the device. The reset action does not change the level of firmware installed
on the device.
In the event you are not able to get a blinking magenta light when initiating dial out from the legacy device,
follow these steps:
1. Make sure the phone cord is attached correctly. (see Figure 1)
2. Connect a Telephone to the PHONE Port to verify the 5301-DC simulated dial tone is audible.
3. Change to a different phone cord cable.
4. Reboot the legacy dial device/modem.
If you need additional assistance, please contact technical support or visit www.accelerated.com/support
for more information.
Accelerated Concepts, Inc. ©2016 5301-DC User’s Guide 9 of 25
ACCELERATED.COM
Configuring Device
Network Managed Configuration
Your Accelerated 5301-DC has the capability to automatically sync and receive all settings from a centralized cloud
management tool, Accelerated View™.
In addition to configuration details, the Accelerated View management portal provides the following capabilities for
your Accelerated 5301-DC.
Otros manuales para Dial-to-IP 5301-DC
1
Tabla de contenidos
Otros manuales de Convertidor de medios de Accelerated
