Abov E-PGM+ Manual de usuario
Leader of Microcontroller Technology
Global Top Smart MCU Innovation Company
Leader of Microcontroller Technology
Global Top Smart MCU Innovation Company
Leader of Microcontroller Technology
Global Top Smart MCU Innovation Company
E-PGM+
E-GANG4/E-GANG6
E-PGM Serial
User Manual
Version 1.0.0
Jun. 28, 2019
For additional information or inquiry, please contact ABOV Semiconductor
or visit its website at www.abov.co.kr.
Revision History
Date Version Description
Jun. 28, 2019 1.0.0 Document created.
Date Version Description
Jun. 28, 2019 1.0.0 Document created.
E-PGM+ E-GANG4/E-GANG6 E-PGM Serial Page 2 / 33 Version 1.0.0
Contents
Chapter 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 2. Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.2. Functional comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3. Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.3.1. E-PGM+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.3.2. E-GANG4/E-GANG6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.3.3. E-PGM Serial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.4. 40-pin DIP TEXTOOL socket pin configuration . . . . . . . . . . . . . . . . . . 12
2.5. 10-pin connector pin configuration . . . . . . . . . . . . . . . . . . . . . . . . 13
Chapter 3. Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.1. Software releases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.2. Software installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.3. Software UI descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.4. Device selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3.5. Programming error messages . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3.6. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3.6.1. Error message: “The program can’t start because WDAPI1010.dll is
missing from your computer. Try reinstalling the program to fix this problem.” . . . . 25
3.6.2. Error message: “No firmware found” or “Device file not found!” . . . . . . . 26
3.6.3. Error message: “No valid license” or “Received an invalid 32bit LOCTL” . . 26
Chapter 4. Connection to handler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4.1. E-PGM+ handler connections . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4.2. E-GANG4 handler connections . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4.3. E-GANG6 handler connections . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Chapter 5. Connecting multiple E-PGM+ units. . . . . . . . . . . . . . . . . . . . . . . . . . 31
Chapter 6. For MC97F1104S/1204S/1316S only . . . . . . . . . . . . . . . . . . . . . . . . . 32
List of Figures
Figure 1 E-PGM+ with target socket module . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 2 E-PGM+ top and side views for function description . . . . . . . . . . . . . . . . . 8
Figure3 E-GANG4exteriorview ................................. 9
Figure4 E-GANG6exteriorview ................................. 9
Figure 5 E-GANG6 exterior view for function description . . . . . . . . . . . . . . . . . . . . 10
Version 1.0.0 Page 3 / 33 E-PGM+ E-GANG4/E-GANG6 E-PGM Serial
Figure 6 E-PGM serial exterior view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 7 E-PGM Serial top and side views for function description . . . . . . . . . . . . . . . 12
Figure 8 40-pin DIP TEXTOOL socket and programming pin assignment . . . . . . . . . . . 13
Figure 9 10-pin IDC connector pin assignment . . . . . . . . . . . . . . . . . . . . . . . . . 14
Figure 10 An example connection of multiple E-PGM+ units . . . . . . . . . . . . . . . . . . . 31
Figure 11 Internal step-up power selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Figure 12 Insertion of a 200 ohm resistor in VPP line . . . . . . . . . . . . . . . . . . . . . . . 33
List of Tables
Table 1 Comparison between E-PGM+, E-GANG4/6, and E-PGM Serial . . . . . . . . . . . 7
Table 2 Pin name and assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table 3 10-pin IDC connector pin configuration for each device group . . . . . . . . . . . . 14
E-PGM+ E-GANG4/E-GANG6 E-PGM Serial Page 4 / 33 Version 1.0.0
Introduction
Chapter 1. Introducon
E-PGM+, E-GANG4/6 and E-PGM Serial series are universal programming equipment for the ABOV
Semiconductor’s MCU series, delivering superior performance and reliability. This products line has the
following features:
• Deliver high programming speed for mass manufacturing
• Standalone programming and automated programming
• Support USB (2.0 full-speed) interface with Microsoft Windows
• Built-in protection circuit for the programmer and target device
• Data port inputs are protected against ESD up to 15 kV
• Support single chip programming mode via the device socket (except for E-PGM Serial)
• Support Gang programming mode via four or six device sockets
• Support in-system programming (ISP) as an on-board programmer
• Capacity of internal flash memory for target binary or hexa format data:
–E-PGM+/E-GANG4/6: 1 Mbytes
–E-PGM Serial: 8 Mbytes
• Support programming of both the main code and option areas
Version 1.0.0 Page 5 / 33 E-PGM+ E-GANG4/E-GANG6 E-PGM Serial
Hardware
Chapter 2. Hardware
2.1 Specicaons
• Product name: E-PGM+, E-GANG4/6, E-PGM Serial
• Standalone type universal programmer
• External 15 VDC Power supply
• Dimensions (W x D x H)
–E-PGM+: 8.3 cm x 14.5 cm x 3.3 cm
–E-GANG4: 33.5 cm x 22.5 cm x 3.5 cm
–E-GANG6: 48.2 cm x 22.5 cm x 3.5 cm
–E-PGM Serial: 8.3 cm x 13.3 cm x 3.3 cm
• Weight
–E-PGM+: 0.35 kg
–E-GANG: 2.0 kg
–E-GANG: 2.8 kg
–E-PGM Serial: 0.33 kg
• Input voltage
–E-PGM+: DC adaptor 15V/1A
–E-GANG4/6: DC adaptor 15V/2A
–E-PGM Serial: DC adaptor 15V/1A
• Power consumption: 15W, 30W (E-GANG4, E-GANG6)
• Operating temperature: -10°C to 40°C
• Storage temperature: -30°C to 80°C
2.2 Funconal comparison
E-PGM+ and E-GANG4/GANG6 have similar features, while E-PGM Serial is different from them as it
is designed only for on-board programming purposes and to be noise-robust for use in mass production
environments.
E-PGM+ E-GANG4/E-GANG6 E-PGM Serial Page 6 / 33 Version 1.0.0
Functions
Table 1: Comparison between E-PGM+, E-GANG4/6, and E-PGM Serial
E-PGM+ E-GANG4/6 E-PGM Serial
40-pin DIP socket ○ ○ ×
ISP port ○ ○ ○
ISP port surge
reinforcement ○ ○ ◎
Supported devices All devices All devices
94/95/96/97XXXX series (except
for 97F1104S/1204S/1316S)
All 32-bit MCUs
Buffer size 1MB 1MB 8MB
Read button Joystick button Joystick button Push button
Support barcode
reader (RS-232C) ○× ×
Handler interface ○ ○ ○
Operating software E-PGM+.exe E-PGM+.exe E-PGM+.exe
E-PGM+ E-GANG4/6 E-PGM Serial
40-pin DIP socket ○ ○ ×
ISP port ○ ○ ○
ISP port surge
reinforcement ○ ○ ◎
Supported devices All devices All devices
94/95/96/97XXXX series (except
for 97F1104S/1204S/1316S)
All 32-bit MCUs
Buffer size 1MB 1MB 8MB
Read button Joystick button Joystick button Push button
Support barcode
reader (RS-232C) ○× ×
Handler interface ○ ○ ○
Operating software E-PGM+.exe E-PGM+.exe E-PGM+.exe
2.3 Funcons
E-PGM+, E-GANG4/6 and E-PGM Serial are designed as a compact system suitable for every
workspace, and are easy to use with simple and convenient features. Consumable parts such as the
40-pin DIP socket, Enter button, and joystick buttons are individually replaceable, ensuring a long service
life. The functions of E-PGM+, E-GANG4/6 and E-PGM Serial are described below:
2.3.1 E‐PGM+
E-PGM+ is a standalone-type universal programmer capable of programming ABOV’s all microcontroller
series. It consist of a main programmer unit and target device socket, and socket adaptor parts.
Version 1.0.0 Page 7 / 33 E-PGM+ E-GANG4/E-GANG6 E-PGM Serial
Functions
Figure 1: E-PGM+ with target socket module
Exterior features of E‐PGM+
Figure 2: E-PGM+ top and side views for function description
1 10-pin IDC connector for in-system programming (ISP)
2 RS-232C serial communication port (external bar code reader interface port)
3SWD port for firmware update and development purposes (not for use)
4Button for programming the target device
5 Button for reading the target device
E-PGM+ E-GANG4/E-GANG6 E-PGM Serial Page 8 / 33 Version 1.0.0
Functions
6 LCD screen for information display—device name, checksum data, and options. PASS/FAIL is
shown as a result of programming, accompanied by an error description in case of failure
7 40-pin DIP TEXTOOL socket for single chip programming mode
8 LED indicator showing the current status when writing is complete (Red: FAIL / Green: PASS)
9 5-pin Molex 5264 connector for the interface with handler equipment
10 USB mini-B connector to a PC
11 Power adaptor connector for the 15V/1A external power
12 System power switch
2.3.2 E‐GANG4/E‐GANG6
E-GANG4 and E-GANG6 are standalone-type universal gang programmers capable of programming
ABOV’s all microcontroller series in gang mode, which enables programming multiple devices at once.
E-GANG4 and E-GANG6 consist of a main programmer unit, target device socket, and socket adaptor
parts. When in on-board programming mode, they can be used in connection with an external handler
or manufacturing equipment without using the socket and the socket adaptor.
Figure 3: E-GANG4 exterior view
Figure 4: E-GANG6 exterior view
Version 1.0.0 Page 9 / 33 E-PGM+ E-GANG4/E-GANG6 E-PGM Serial
Functions
Exterior features of E‐GANG6
Figure 5: E-GANG6 exterior view for function description
1 10-pin IDC connector for in-system programming (ISP)
2SWD port for firmware update and development purposes (not for use)
3 Button for programming the target device “G1” only
4 Button for reading the target device
5 LCD screen for information display—device name, checksum data, and options. PASS/FAIL is
shown as a result of programming, accompanied by an error description in case of failure
640-pin DIP TEXTOOL socket for gang programming mode—Gang4 has four separate sockets
and Gang6 has six separate sockets
7 LED indicator showing the current status when writing is complete (Red: FAIL / Green: PASS)
E-PGM+ E-GANG4/E-GANG6 E-PGM Serial Page 10 / 33 Version 1.0.0
Otros manuales para E-PGM+
1
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Placa madre de Abov
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
