ABB Relion 615 series Manual de usuario
—
RELION® PROTECTION AND CONTROL
615 series
IEC 60870-5-103 Communication
Protocol Manual
Document ID: 1MRS759001
Issued: 2019-04-30
Revision: A
Product version: 5.0 FP1
© Copyright 2019 ABB. All rights reserved
Copyright
This document and parts thereof must not be reproduced or copied without written
permission from ABB, and the contents thereof must not be imparted to a third party,
nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license and
may be used, copied, or disclosed only in accordance with the terms of such license.
Trademarks
ABB and Relion are registered trademarks of the ABB Group. All other brand or
product names mentioned in this document may be trademarks or registered
trademarks of their respective holders.
Warranty
Please inquire about the terms of warranty from your nearest ABB representative.
www.abb.com/relion
Disclaimer
The data, examples and diagrams in this manual are included solely for the concept or
product description and are not to be deemed as a statement of guaranteed properties.
All persons responsible for applying the equipment addressed in this manual must
satisfy themselves that each intended application is suitable and acceptable, including
that any applicable safety or other operational requirements are complied with. In
particular, any risks in applications where a system failure and/or product failure
would create a risk for harm to property or persons (including but not limited to
personal injuries or death) shall be the sole responsibility of the person or entity
applying the equipment, and those so responsible are hereby requested to ensure that
all measures are taken to exclude or mitigate such risks.
This product has been designed to be connected and communicate data and
information via a network interface which should be connected to a secure network.
It is the sole responsibility of the person or entity responsible for network
administration to ensure a secure connection to the network and to take the necessary
measures (such as, but not limited to, installation of firewalls, application of
authentication measures, encryption of data, installation of anti virus programs, etc.)
to protect the product and the network, its system and interface included, against any
kind of security breaches, unauthorized access, interference, intrusion, leakage and/or
theft of data or information. ABB is not liable for any such damages and/or losses.
This document has been carefully checked by ABB but deviations cannot be
completely ruled out. In case any errors are detected, the reader is kindly requested to
notify the manufacturer. Other than under explicit contractual commitments, in no
event shall ABB be responsible or liable for any loss or damage resulting from the use
of this manual or the application of the equipment.
Conformity
This product complies with the directive of the Council of the European Communities
on the approximation of the laws of the Member States relating to electromagnetic
compatibility (EMC Directive 2014/30/EU) and concerning electrical equipment for
use within specified voltage limits (Low-voltage directive 2014/35/EU). This
conformity is the result of tests conducted by the third party testing laboratory Intertek
in accordance with the product standard EN 60255-26 for the EMC directive, and with
the product standards EN 60255-1 and EN 60255-27 for the low voltage directive. The
product is designed in accordance with the international standards of the IEC 60255
series.
Table of contents
Section 1 Introduction.......................................................................3
This manual........................................................................................ 3
Intended audience.............................................................................. 3
Product documentation.......................................................................4
Product documentation set............................................................4
Document revision history............................................................. 4
Related documentation..................................................................5
Symbols and conventions...................................................................5
Symbols.........................................................................................5
Document conventions.................................................................. 5
Section 2 IEC 60870-5-103 overview...............................................7
IEC 60870-5-103 standard................................................................. 7
Documentation................................................................................... 8
Section 3 Vendor-specific implementation....................................... 9
Product series implementation........................................................... 9
Communication link............................................................................ 9
Communication link setup........................................................... 10
Diagnostic counters..................................................................... 11
IEC 60870-5-103 process data.........................................................12
IEC 60870-5-103 data objects.....................................................12
Indications................................................................................... 12
ASDU 2 type fault number and relative time data.................. 13
Configuring of IEC 60870-5-103 indications...........................13
Class 1 event overflow........................................................... 14
Chronology of Class 1 events................................................ 14
Class 1 data message priorities............................................. 15
LED objects............................................................................ 15
Analog events..............................................................................16
Configuring of analog events..................................................16
Value interpretation................................................................ 17
Controls....................................................................................... 17
Circuit breaker control model................................................. 17
Local, Remote, Station, All and Off states..............................17
Control operation rejections................................................... 18
Measurands.................................................................................18
Class 2 measurands...............................................................18
Other Class 2 measurand frames.......................................... 19
Selection of Class 2 frame..................................................... 20
Table of contents
615 series 1
Communication Protocol Manual
Scaling of Class 2 measurands .............................................20
Unsupported analog values....................................................20
Measurand events and registration objects............................20
Energy counters.......................................................................... 21
Operation principle................................................................. 22
Interpretation of the counter values........................................23
Accessing of non-protocol-mapped data..................................... 23
Other IEC 60870-5-103 data............................................................ 24
Changing of parameter setting group.......................................... 24
Device identification.....................................................................25
Device function type............................................................... 25
Device identification code.......................................................25
Time synchronization...................................................................26
Block monitoring.......................................................................... 26
Disturbance recorder file transfer..................................................... 26
Disturbance recorder file directory (ASDU 23)............................ 26
Disturbance recorder channel identification................................ 27
Disturbance recorder tags identification...................................... 28
Disturbance recorder transfer......................................................29
Non-standard features......................................................................29
GI optimization.............................................................................30
Troubleshooting................................................................................31
Section 4 IEC 60870-5-103 parameters and diagnostics...............33
Parameter list................................................................................... 33
Monitored data..................................................................................35
Section 5 Glossary......................................................................... 37
Table of contents
2615 series
Communication Protocol Manual
Section 1 Introduction
1.1 This manual
The communication protocol manual describes a communication protocol supported
by the protection relay. The manual concentrates on vendor-specific
implementations.
1.2 Intended audience
This manual addresses the communication system engineer or system integrator
responsible for pre-engineering and engineering the communication setup in a
substation from a protection relay's perspective.
The system engineer or system integrator must have a basic knowledge of
communication in protection and control systems and thorough knowledge of the
specific communication protocol.
1MRS759001 A Section 1
Introduction
615 series 3
Communication Protocol Manual
1.3 Product documentation
1.3.1 Product documentation set
Planning &
purchase
Engineering
Installation
Commissioning
Operation
Maintenance
Decommissioning,
deinstallation & disposal
Quick start guide
Quick installation guide
Brochure
Product guide
Operation manual
Installation manual
Connection diagram
Engineering manual
Technical manual
Application manual
Communication protocol manual
IEC 61850 engineering guide
Point list manual
Cyber security deployment guideline
GUID-12DC16B2-2DC1-48DF-8734-0C8B7116124C V2 EN
Figure 1: The intended use of documents during the product life cycle
Product series- and product-specific manuals can be downloaded
from the ABB Web site http://www.abb.com/relion.
1.3.2 Document revision history
Document revision/date Product version History
A/2019-04-30 5.0 FP1 First release
Download the latest documents from the ABB Web site
http://www.abb.com/substationautomation.
Section 1 1MRS759001 A
Introduction
4615 series
Communication Protocol Manual
Otros manuales para Relion 615 series
41
Tabla de contenidos
Otros manuales de Relé de ABB
ABB
ABB Relion REC670 Guía de inicio rápido
ABB
ABB SPAD 330 C Manual de usuario
ABB
ABB PMA Manual
ABB
ABB CM Series Manual de usuario
ABB
ABB REJ 523 Manual del producto
ABB
ABB Relion 611 Series Manual de usuario
ABB
ABB C6701 Manual de usuario
ABB
ABB CL-LSR Series Manual
ABB
ABB REL650 series Instrucciones de uso
ABB
ABB SGR-51 Manual de usuario
