A.u.S MINI PROGRAMMER Manual de usuario
1
MINI PROGRAMMER
Programmer for RM4-RM5 Electronic Coin Mechanism
G:/Formulare/Münzprüfer/Secci/RM5 Programmergb.doc
A.u.S. Spielgeräte GmbH
A-1210 Wien Scheydgasse 48
Tel. +43-1-271 66 00
Fax. +43-1-271 66 00 75
www.aus.at
2
MANUAL STRUCTURE
The manual is divided in four parts:
PART 1 A general description containing connection
details and warning signals which are valid for all
coin mechanism versions.
PART 3 Contains function, descriptions of all versions of the
coin mechanism.
PART 2 Contains the “MENU TABLES”.
The “MENU TABLES”, corresponding to version
required, is automatically proposed by
PROGRAMMER when the latter is connected to
coin mechanism. In the “MENU TABLES” and
for each function, it is mentioned the 3
rd
part that
allows to obtain explanations.
PART 4
Contains the procedures to adjust coin mechanisms.
3
PART 1
GENERAL CHARACTERISTICS:
The RM4-PROGRAMMER device is required to read and change
data contained in the coin mechanism i.e.:
• prices
• bonus
• times
• counters
• various options
• adjustment parameters
• duplication
It has 3 keys to select the different functions
•KEY “+” Increase
•KEY “-“ Decrease
•KEY “OK” Confirm
Each function can be entered, through key “+” and key “-“ setting
the corresponding number and pushing key “OK”.
Once the change has been made and following the instructions in
the manual, push key “OK” to confirm it and exit from the
function.
4
CONNECTIONS INSTRUCTIONS
The device is not a self fed. Therefore it is supplied by the coin
mechanism connected to machine on which it works. The device
can be also fed by a testing supplier.
The PROGRAMMER has to be connected to the serial connector
which is placed in the back part of coin mechanism.
Once connected it displays by steps of 2 seconds the following
writtens “COMESTERO GROUP”
“MINI PROGRAMMER”
“ V.1.3 dated 05/12/01 “
“ VALIDATOR –00 ”
“ RM5-3 ”
The 3
rd
line shows the software version of the programmer.
The last 2 writtens the configuration of the coin mechanism as well
as the model
The available configurations are:
"
VALIDATOR - 00"
"VENDING TOTALIZER - 10"
"IMPULSIVE TOTALIZER - 20"
"PROGRESSIVE TIME - 30"
"CREDIT STORAGE TOTALIZER WITH RELEASE UPON REQUEST –
40”
"TIME CREDIT STORAGE TOTALIZER WITH RELEASE UPON REQUEST –
60”
"TOTALIZER FOR PHOTOCOPING MACHINES - 70"
The models concerned by the programmer are:
RM4 – RM5-2 – RM5-3.
If the coinmech is not recognized it will show:
“WRONG VERSION”
After 2 seconds it will go on first option:
“READ COUNTER ”
The PROGRAMMER automatically indicates the menu functions
according to the version of coin mechanism to which the
programmer is connected.
(reference “MENU TABLE” – 2
nd
part of manual).
NOTE: inside the programmer there is a battery type 6LR61-
9V.When switching on the unit, if the battery is low, will be
displayed the message “Battery Low”.
Please proceed to the sostitution.
IMPORTANT: change the battery every 6 months also if NO
message is shown on the programmer.
5
WARNING SIGNALS
The warning signals during the process of different functions are:
“SERIAL ERROR” – “CLONING ERROR”
The first refers to a wrong writing in the coinmech, the second to
an error during cloning process.
In both cases try to switch off and on the coin mechanism.
If the message still remain check the connector of the programmer.
NOTE: In case programmer’s display shows anything check as
follows:
a) the coin mechanism is properly supplied
b) the connection between Programer and coin mechanism
Connection to RM3 coin mechanism
The PROGRAMMER can not be connected to RM3 coin
mechanism
6
PART 2
MENU FUNCTIONS FOR RMX00: Validator
RED COUNTER (Sec. 1.a)
SALE PRICE CHANGE (Sec. 2.a)
CREDIT PULSE LENGHT (Sec. 3.a)
DUCT OPTION (Sec. 5)
COUNTER RESET (Sec. 6.a)
COUNTER ENABLING (Sec. 7.a)
OUTPUT TYPE (Sec. 11 )
CHANNEL ENABLE (Sec. 18 )
LIMIT CORRECTION (Sec. 19 )
VALUES TABLES (Sec. 20 )
CHANNEL ADJUSTMENT (Sec. 21 )
SUBSTITUTIVE CHANNEL (Sec. 22)
CHANGER CONFIGURATION (Sec. 23 )
DUPLICATION (Sec. 24 )
OVERLAPPING (Sec. 25 )
MINIPROGRAMMER UPGRADE (Sec. 26 )
7
MENU FUNCTIONS FOR RMX10: 2 Prices totalizer for vending machines
READ COUNTER (Sec. 1.b)
SALE PRICE CHANGE (Sec. 2.b)
DUCT OPTIONS (Sec. 5 )
COUNTER RESET (Sec. 6.b)
COUNTER ENABLING (Sec. 7.b)
CREDIT COLLECTION (Sec. 8.a)
RESET TIME CHANGE (Sec. 9)
DISPLAY OPTION (Sec. 12 )
RESET TYPE OPTION (Sec. 14 )
RESET TYPE SET INTERNAL/EXTERNAL (Sec. 17 )
CHANNEL ENABLE (Sec. 18 )
LIMIT CORRECTION (Sec. 19 )
VALUES TABLE (Sec. 20 )
CHANNEL ADJUSTMENT (Sec. 21 )
SUBSTITUTIVE CHANNEL (Sec. 22 )
CHANGE CONFIGURATION (Sec. 23 )
DUPLICATION (Sec. 24 )
OVERLAPPING (Sec. 25 )
MINIPROGRAMMER UPGRADE (Sec. 26 )
8
MENU FUNCTIONS FOR RMX20: Impulsive totalizer
READ COUNTER (Sec. 1.a)
SALE PRICE CHANGE (Sec. 2.c)
CREDIT PULSE LENGHT (Sec. 3.a)
DUCT OPTION (Sec. 5)
COUNTER RESET (Sec. 6.a)
COUNTER ENABLING (Sec. 7.a)
CHANNEL ENABLE (Sec. 18 )
LIMIT CORRECTION (Sec. 19 )
VALUES TABLES (Sec. 20 )
CHANNEL ADJUSTMENT (Sec. 21 )
SUBSTITUTIVE CHANNEL (Sec. 22)
CHANGER CONFIGURATION (Sec. 23 )
DUPLICATION (Sec. 24 )
OVERLAPPING (Sec. 25 )
MINIPROGRAMMER UPGRADE (Sec. 26 )
MENU FUNCTIONS FOR RMX30: Progressive timer
READ COUNTER (Sec. 1.a)
SALES PRICE CHANGE (Sec. 2.d)
WARNING TIME (Sec. 4)
DUCT OPTION (Sec. 5)
COUNTER RESET (Sec. 6.a)
COUNTER ENABLING (Sec. 7.a)
EXTERNAL COUNTER – 3C (Sec.15a)
EXTERNAL BUTTON – 3R (Sec.15b)
ECONOMIZER (Sec. 16 )
CHANNEL ENABLE (Sec. 18 )
LIMIT CORRECTION (Sec. 19 )
VALUES TABLE (Sec. 20 )
CHANNEL ADJUSTMENT (Sec. 21 )
SUBSTITUTIVE CHANNEL (Sec. 22 )
CHANGE CONFIGURATION (Sec. 23 )
DUPLICATION (Sec. 24 )
OVERLAPPING (Sec. 25 )
MINIPROGRAMMER UPGRADE (Sec. 26 )
9
MENU FUNCTIONS FOR RMX40: Credit release totalizer upon request
READ COUNTER (Sec. 1.a)
SALE PRICE CHANGE (Sec. 2.c)
CREDIT PULSE LENGHT (Sec. 3.a)
DUCT OPTION (Sec. 5)
COUNTER RESET (Sec. 6.a)
COUNTER ENABLING (Sec. 7.a)
CREDIT COLLECTION (Sec. 8.b)
CHANNEL ENABLE (Sec. 18 )
LIMIT CORRECTION (Sec. 19 )
VALUES TABLES (Sec. 20 )
CHANNEL ADJUSTMENT (Sec. 21 )
SUBSTITUTIVE CHANNEL (Sec. 22)
CHANGE CONFIGURATION (Sec. 23 )
DUPLICATION (Sec. 24 )
OVERLAPPING (Sec. 25 )
MINIPROGRAMMER UPGRADE (Sec. 26 )
10
MENU FUNCTIONS FOR RMX60: Timed credit release totalizer upon request
READ COUNTER (Sec. 1.a)
SALE PRICE CHANGE (Sec. 2.c)
CREDIT PULSE LENGHT (Sec. 3.b)
DUCT OPTION (Sec. 5)
COUNTER RESET (Sec. 6.a)
COUNTER ENABLING (Sec. 7.a)
CREDIT COLLECTION (Sec. 8.b)
TIME DISPLAY OPTION (Sec. 13)
CHANNEL ENABLE (Sec. 18 )
LIMIT CORRECTION (Sec. 19 )
VALUES TABLES (Sec. 20 )
CHANNEL ADJUSTMENT (Sec. 21 )
SUBSTITUTIVE CHANNEL (Sec. 22)
CHANGER CONFIGURATION (Sec. 23 )
DUPLICATION (Sec. 24 )
OVERLAPPING (Sec. 25 )
MINIPROGRAMMER UPGRADE (Sec. 26 )
Tabla de contenidos
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
