
6. Maintenance advice
Monitor the filter condition regularly.
Maintenance inspections are especially useful in spring and autumn,
and after long dry periods!
When testing the sieve, examine the filter by holding up against the light
and inspect for any blocked holes in the filter mesh.
As necessary clean the filter with a brush, using a little washing up liquid
to help dissolve any fatty deposits or hydrocarbon build up.
You may also put the filter insert into a dishwasher.
The filter insert is made of stainless steel.
With slightly inclined filters, like the Patronen Filter, a streak of dirt may build
up which dries out after a while. The dirt then peals away or breaks off and
with the next rain shower it is rinsed away.
Use of the Optional Backwashing Device (see page 3)!
The filter is simply and easily cleaned
with the backwashing device.
A small jet nozzle is installed below the filter sieve.
In the 3P Patronen Filter the filter cartridge rotates rapidly
during rinsing.
The strong jet of water rinses the mesh effectively
and dislodges the dirt and also the filter cartridge
is typically left in an alternate position.
7. Guarantee
3P Technik Filtersysteme GmbH offers this product
the guarantee required by law (from date of purchase).
04
3P Patronen Filter PF
Rainwaterfilter >for installation within rainwater tanks
3P Backwashing Device
SF + PF
Innovative Rainwater Harvesting
w w w.3PTechnik.com
w w w.3PTechnik.com
3P Patronen Gebrauch GB 04.09.2007 12:42 Uhr Seite 1