3One data USB485 Series Manual de usuario

USB232×

USB485×

USB to RS-232/485/422

Operation Instructions for Industrial Control Intelligent

Converter

Shenzhen 3onedata Technology Co.,Ltd

Tel: +86-755-26702688 Fax: +86-755-26703485

www.3onedata.com

USB232/485× Operation Instructions

I. Preparation for Use

II. Product Description

III. Range of Application

IV. Functional Characteristics

V. Definition of Serial Port Pin

VI. Installation of Driver Program

Method I (Recommended)

Method II

VII. Deletion of Driver Program

Method I

Method II

VIII. Modification of Serial Port Number

I. Preparation for Use

Before using USB232/485×, please make sure your computer is IBM PC compatible and

meets minimum system requirements below:

(1) Intel compatible 486DX4-100 MHz CPU or higher

(2) A standard USB interface (4-pin), marked with

(3) Windows 98/Me or Windows 2000/XP/Vista operating system, etc.

Notices:

(1) Before using the product, please read carefully the operation instructions thereof.

(2) Before using USB232/485×, it is suggested that you shut down computer and make

equipment ground point connected with ground reliably to minimize damage to your

system from electrostatic and surge signals on communication line (if used for general

purpose, it may not be connected with ground).

(3) The USB port of USB232/485× must be connected with computer and can not be

connected with any other device with USB interface, such as digital camera, scanner,

printer, etc.

II. Product Description

1：Description of USB232 product

USB232 is an industrial control intelligent converter of USB to RS232.

After the driver program of USB232 is installed, a virtual serial COM port will be formed

automatically in your computer system. For example, your computer has both COM1 and COM2

serial ports originally, and after UC driver program is installed, a virtual COM3 port will be

formed automatically (generally speaking, it is like this; concrete COM port number is allocated

automatically by virtual driver program). If your computer has no RS-232 interface (e.g. relatively

new notebook computer), a virtual COM1 port will be formed automatically after the driver

program is installed.

The virtual COM port from USB232 driver program and the original COM port from

computer are the same for application software. As long as your application software can map (or

select) to the virtual COM port, the communication with RS232 device will be realized, i.e. the

conversion process from virtual COM port driver program to calling USB driver program is

completely transparent for users, and users need not pay attention to realization details of the

process and nothing remains but to consider the serial port communication.

2：Description of USB485× product

USB485× is an industrial control intelligent converter of USB to RS-485/422 and it is the

best solution for you to realize communication with RS-485/422 device by means of USB.

Compared with ordinary RS-232 RS-485/422 converter, USB485× converter has the

advantages below:

Generally, the method of controlling RS-485/422 device by means of computer is to connect

a converter of RS-232 to RS-485/422 by means of RS-232 serial interface of computer for data

communication. In this mode, application program realizes communication with RS-485/422

device by visiting COM port of computer, but this mode now has some problems below:

(1) RS-232 is a relatively out-of-date communication protocol and many new computers, e.g.

notebook computers, have had no the interface;

(2) The speed rate of RS-232 is not high enough (high-speed RS-485 can realize 10Mbps

communication rate, and generally, the baud rate of RS-232 port of computer can

reach115kbps only, so it fails to meet the requirement of conversion rate);

(3) The passive (without external power supply) converter of RS-232 to RS-485/422 is

required to be used in many places, and here the converter must be powered from RS-232

port for normal working, it probably suffers from a power shortage.

While USBRS-485/422 converter covers the above shortage.

(1) USB (universal serial bus) is current prevailing computer interface standard. Many new

computers all have USB interfaces;

(2) Compared with RS-232, USB interface has higher communication rate. USB1.1 can reach

12Mbps and USB2.0 can reach 480Mbps, and moreover, multiple rates and

communication modes are available, so the requirement of conversion to high speed 485

can be met fully.

(3) USB interface itself has relatively strong power supply ability. Therefore,

USBRS-485/422 converter has no need of external power supply (i.e. it is free from

power shortage). In addition, USB has such advantages as hot plug, convenient

connection, connecting with multiple devices, etc.

How does USB485× converter realize the application software communication with

RS-485/422 device? It is necessary for users to understand the realization process. The detailed

principle is described as follows:

After the driver program of USB485× is installed, a virtual serial COM port will be formed

automatically in your computer system. For example, your computer has both COM1 and COM2

serial ports originally, and after USB485× driver program is installed, a virtual COM3 port will be

formed automatically (generally speaking, it is like this; concrete COM port number is allocated

automatically by virtual driver program). If your computer has no RS-232 interface (e.g. relatively

new notebook computer), a virtual COM1 port will be formed automatically after the driver

program is installed.

The virtual COM port from USB485× driver program and the original COM port from

computer are the same for application software. As long as your application software can map (or

select) to the virtual COM port, the communication with RS-485/422 device will be realized, i.e.

the conversion process from virtual COM port driver program to calling USB driver program, and

then to RS-485/422 is completely transparent for users, and users need not pay attention to

realization details of the process and nothing remains but to consider the serial port

communication.

The following diagram may help you understand the conversion process:

Illustrated Diagram for USB232 Virtual Serial Port

Illustrated Diagram for USB485X Virtual Serial Port

Note: It is transparent transmission process inside dashed line. It is unnecessary for users to pay attention to

realization details.

III. Range of Application

The product is applicable to industrial control automatic system, bar code scanner, Palm,

PLC and PLD, PDA (WinCE system), label printer, POS system, data acquisition control system

and security access system, etc.

IV. Functional Characteristics

◎Single chip (ASIC) USB port to serial port communication

◎Support Windows98/ME and Windows2000/XP, Windows Server 2003/2008, Windows

7/Vista

◎Support MAC Apple and Linux v5.0

◎Completely compatible USB v2.0 specification

◎USB full speed connection

◎USB direct power supply, without external power supply

◎Support automatic handshake protocol

◎Reach 57.6kbps transmission rate within 1200m (230kbps at short distance); customize

short-distance rate 500K bps

◎Conform to TIA/EIA RS-485/RS-422 standard

◎Support remote wakeup and power supply management

◎Support point-to-multi-point (RS-485 port at most can be connected with 32 standard 485

devices)

Notices:

(1) RS-485 communication rate of USB485× is affected by communication distance.

Generally, the longer the distance is, the lower the communication rate is. The brief corresponding

table is as follows:

Communication distance

0~10m

300m

1200m

3000m

Rate (maximum)

230kbps

115kbps

57.6kbps

9600bps

(Numerical values in the above table are ideal. Concrete communication rate will be affected by

actual environment and may not reach the above numerical values)

(2) In theory, RS-485 bus of USB485× at most can be connected with 32 standard 485

devices, but affected by load and communication distance, actual number of at most connecting

with devices may not reach the numerical value (generally more than 20).

V. Definition of Serial Port Pin

USB232:USB to RS-232 converter

USB485B:USB to RS-485 converter

USB485C: USB to RS-485/422 converter

RS-232：

1 :DCD 2: RXD 3:TXD 4:DTR 5: GND

6 :DSR 7:RTS 8: CTS 9:RI

RS-485：

1:D-(B) 2:D+(A) 5: GND

RS-422：

1: T- 2: T+ 3:R+ 4: R- 5: GND DB9M (male connector, needle type)

VI. Installation of Driver Program

Method I: (Recommended)

Enter CD catalog-Setup file folder and execute USB_drv.exe automatic installation wizard

program, and click Next.

USB485× driver program will be installed automatically in your system.

After installed successfully, the USB485× product can be put into normal service.

Note: after successful installation, the corresponding USB virtual serial port (virtual serial

port device (COM3)) can be viewed in device manager.

Method II:

Please install USB to RS485 device driver program in steps below:

(1) Switch on power supply of the computer connecting with USB to RS485 device, and

make sure the USB port to be connected has been started and put into normal service.

(2) Insert USB connecting line into USB interface, and Windows will detect the device and

execute the wizard for adding new hardware to help you set new device. Install twice in

total; install USB <-> Serial for the first time and click Next to continue.

(3) Open USB to serial port line driver CD -CDM 2.04.16 WHQL Certified catalog, and

select searching up-to-date driver program for hardware, and then click Next; select

installation from CD and then click OK. Or click Browse to manually select driving

catalog (CDM 2.04.16 WHQL Certified catalog), and click OK, then click Next to wait

for finishing installation.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Convertidor de medios de 3One data

3One data

3One data SW485GI Manual de usuario

3One data

3One data CAN485 Manual de usuario

3One data

3One data IPMC101 Series Manual de usuario

3One data

3One data 1200 Series Manual de usuario

3One data

3One data E232 Manual de usuario

3One data

3One data USB8232I Manual de usuario

3One data

3One data TTL-485-5P Manual de usuario

3One data

3One data E485 Manual de usuario

3One data

3One data TLC422 Manual de usuario

3One data

3One data IMC101B Series Manual de usuario

3One data

3One data PD101G Series Manual de usuario

3One data

3One data USB4485 Manual de usuario

3One data

3One data 3012SS Manual de usuario

3One data

3One data Model277 Manual de usuario

3One data

3One data 1100SS Manual de usuario

3One data

3One data IMC102B-F Manual de usuario

3One data

3One data IPMC100 Series Instrucciones de funcionamiento y mantenimiento

3One data

3One data IMC100-2T1F-1D Manual de usuario

3One data

3One data 3011 Manual de usuario

3One data

3One data CAN232 Manual de usuario

3One data

3One data 7210 Series Manual de usuario

3One data

3One data 1200 Manual de usuario

3One data

3One data 277/B Manual de usuario

3One data

3One data 3012 Series Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario