3nStar 2054K Series Manual de usuario
1
XP-DT325B
2054K Series
Thermal Barcode Printer
User’s Manual
Direct Thermal Printer
Please keep the user’s manual properly for reference
Contents
Copyright statement.............................................................................................................1
Cautions............................................................................................................................... 1
I. Product............................................................................................................................. 2
II. Receiving........................................................................................................................ 3
2.1 Unpacking and checking accessories.................................................................. 4
2.2 Printer components.............................................................................................. 5
2.2.1 Front view.....................................................................................................5
2.2.2 Rear view......................................................................................................5
III. Installation..................................................................................................................... 6
3.1 Install the printer.....................................................................................................6
3.2 Install the label........................................................................................................7
3.3 Install the stripping module – optional................................................................... 8
3.4 Stripping mode – optional...................................................................................... 9
3.5 Install the cutter – optional................................................................................... 10
IV. LED indicator and button functions.............................................................................10
4.1 LED indicator....................................................................................................... 11
4.2 General button functions.......................................................................................11
4.3 Boot function........................................................................................................ 11
V. Diagnostic Tool............................................................................................................. 16
5.1 Enable the Diagnostic Tool program.................................................................... 17
5.2 Printer settings...................................................................................................... 17
5.3 Calibrate the paper sensor with the Diagnostic Tool............................................ 18
5.4
Set the Ethernet with the Diagnostic Tool (optional)............................................19
VI. Troubleshooting...........................................................................................................21
6.1 Common problems............................................................................................... 21
VII. Simple maintenance procedures of the printer...........................................................25
Update history............................................................................................................26
1
Copyright statement
The manual is provided to the purchaser for reference in use and operation of the
purchased equipment, and shall not be used or copied for other purposes without express
written permission. All other brand names, product names, or trademarks are the property
of other individual owners. Due to continuous product improvement, the machine
specifications, accessories, parts, designs and software contents described in the manual
are for reference only, and subject to the product purchased. Changes may be made
without prior notice.XP does its best to ensure that the contents of the manual are correct,
but errors are still likely to occur. XP reserves the right to correct any such errors and
declares that it shall not be liable for any consequences caused thereby.
Cautions
1. When opening the cover of the printer, keep fingers and other parts of
2
your body away from the paper exit to avoid crushing injury.
2. If the button battery RTC contained in the main board is not replaced
correctly, the main board cannot be used normally.
3. Please dispose of the used batteries according to the manufacturer’s
operation instructions.
I. Product
Thank you for purchasing our 2054K series thermal barcode printer. This desktop printer
will provide you with safe, reliable and efficient printing at a reasonable price. By using it,
3
the volume labels can be printed in a wide range of texts or graphic formats. Meanwhile, its
superior function and easy operation make it your best choice among the thermal barcode
printers of the same level.
The 2054K series printer provides thermal printing. The printing speed is adjustable
from 2.0, 3.0, 4.0, 5.0 to 6.0 inches per second. It applies to a variety of printing materials,
including paper rolls, paper slices and fan-fold labels. In addition, the printer has the
built-in 1D and 2D barcodes that are commonly used, a TTF font and eight sets of English
numeric fonts in different sizes, and supports printing in 4 different directions. And through
the zoom function, the fonts can be enlarged. All these will enable you to improve the label
printing efficiency significantly.
II. Receiving
This printer is specially packaged to protect against possible damage in transit.
However, since the printer may still be subjected to unexpected damage during
4
transportation, you are kindly required to check the packaging and all units carefully when
receiving the printer. In case of obvious damage, please contact the sales dealer directly and
indicate the severity of the damage. If necessary, you should keep the packaging materials
for returning the printer.
2.1 Unpacking and checking accessories
Once you have received your barcode printer, place it on a clean, steady table and
carefully remove the packaging materials. Check if the following items are included:
One printer
One disk
Paper supply kit (1" core)
One USB cable
One power supply
One power cord
One copy of quick installation guide
Dealer's options:
Peel-off module (factory optional)
Ethernet interface (factory optional)
WIFI interface(factory optional)
Bluetooth interface(factory optional)
RTC battery (factory optional)
Cutter module (factory optional)
User’s options:
External paper roll holder (O.D. 214 mm with 1" or 3" core)
Bushing of paper roll shaft: 1.5", two
5
2.2 Printer components
2.2.1 Front view
2.2.2 Rear view
1.
Power switch
2.
Power socket
3. USB interface
4. Ethernet interface
5. SD card slot
Note: The transmission interfaces of the printer in the picture will vary depending on the
model of machine you purchase. For the actual transmission interface, please refer to the
catalog specifications.
Cover hook
Feed button
Front panel
Paper exit
Power indicator
Transparent window
Printer cover
1 2 3 4 5
6
III. Installation
3.1 Install the printer
1. Place the printer on a smooth and steady surface and
make sure the power is off.
2. Plug one end of the parallel port cable, serial port
cable or USB cable into the slot on the back of the
printer, and connect the other end of the cable to the
appropriate slot of your computer.
3. Plug the power cord into the power slot on the back
of the printer and plug the other end into an AC socket.
Note: Make sure the printer power is switched off when
you plug the power cord into the power slot on the back
of the printer.
7
3.2 Install the label
1. Install the label into the paper supply kit. (Fixing plate & Paper roll shaft )
*1.5"纸卷轴榇套
纸卷
打印面朝上
纸卷轴
固定片
2. Push the printer cover hook forward with both hands to open the printer cover.
3. Place the label roll on the label roll holder. (Print side up)
4. Pass the label through the paper guide and pull the label over the rubber roller.
Fixing plate
Print side up
1" Paper roll shaft
Paper roll
Fixing plate
Print head
Label holder
Paper guide
Printer cover hook
Rubber roller
8
5. Close the printer cover.
Note: To avoid poor printing quality, make sure the printer cover is closed tightly.
3.3 Install the peel-off module – optional
1. Push the cover hook forward with both hands to open the upper cover of the printer.
2. Dismantle the front panel, insert the peel off cable into the corresponding socket hole.
3. Install the peel-off module into the lower inner cover groove.
4. Gently push the stripping panel to lock the lower inner cover.
5. Reinstall the upper cover on the printer.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Lector de código de barras de 3nStar
3nStar
3nStar SC440 Guía del usuario
3nStar
3nStar SC430 Guía del usuario
3nStar
3nStar SC050 Manual del propietario
3nStar
3nStar SC430 Manual de usuario
3nStar
3nStar SC365 Manual de usuario
3nStar
3nStar SCI150 Manual de usuario
3nStar
3nStar SC050 Manual de usuario
3nStar
3nStar SC505 Manual de usuario
3nStar
3nStar PTE0905-MSR Manual de usuario
3nStar
3nStar SC400 Manual del propietario
