3M 1711 Guía de configuración
3M Visual Systems Department OHP Service Documentation Resource
6801 River Place Boulevard Copyright © 2005. All Rights Reserved
Austin, Texas 78726-9000 78-6970-7536-0
www.3m.com/meetings
1700 Overhead Projector
Illustrated Parts Breakdown
Beige colored machines:
1706, 1707, 1710, 1715
Gray colored machines:
1711, 1720, 1730, 1740, 1745, 1760,
1765, 1780
(4/10/2005)
3M™Overhead Projector 1700 Series Illustrated Parts Breakdown
© 3M 2005. All Rights Reserved. ii
Revision History
Original Issue date: 1998
The release date, revision level, pages changed and a description of the modifications are listed below.
Revision Date Page(s) Changed Description
Rev A 1998 All pages First edition released.
Rev B 4/2001 All pages Added Gray machine references
Rev C 10/2001 Figure 5, Pages 13-14 Top Cover individual parts combined.
Rev D 5/2002 All pages Updated part nbrs and assembly nbrs. Added
rev history page.
Rev E 9/2002
Quick Ref Parts Index
and Figure 1,
Pages 5 and 6
Figure 11, Page 25
Added new Head Assemblies for Gray
machines.
Removed Head Assembly part nbrs for Beige
machines.
Added new Roll Film Kit.
Rev F 4/2003 Figure 3,
Page 10 Updated part numbers for items 3 and 10.
Rev G 3/2005 All pages Added new Arm/ Focus, Top Cover
Assemblies. Updated kits, part nbrs, and
Appendix information.
All rights reserved. No part of this book covered by the copyrights hereon may be reproduced or copied in any
form or by any means-graphic, electronic, or mechanical, including photocopying, taping or information storage
and retrieval systems-without written permission of 3M Visual Systems Department.
3M™Overhead Projector 1700 Series Illustrated Parts Breakdown
© 3M 2005. All Rights Reserved. iii
Table of Contents
INTRODUCTION ...................................................................................................................................................1
QUICK REFERENCE PARTS INDEX .............................................................................................................................2
SECTION 0. MACHINE OVERVIEW.............................................................................................................................3
SECTION 1. HEAD ASSEMBLY ..................................................................................................................................4
SECTION 2. ARM AND FOCUS ASSEMBLY (BEIGE COLOR).........................................................................................6
SECTION 3. ARM AND FOCUS ASSEMBLY (GRAY COLOR)(SERIAL NUMBER 170006497 AND BELOW) .........................8
SECTION 4. ARM/FOCUS/POST ASSEMBLY (GRAY COLOR)(SERIAL NUMBER 170006498 AND ABOVE) .....................10
SECTION 5. POST ASSEMBLY ................................................................................................................................11
SECTION 6. TOP COVER ASSEMBLY (SERIAL NUMBER 170000988 AND BELOW)......................................................13
SECTION 7. TOP COVER ASSEMBLY (SERIAL NUMBER 170000989 AND ABOVE)......................................................15
SECTION 8. BASE ENCLOSURE ..............................................................................................................................16
SECTION 9. CONTROL MODULE .............................................................................................................................18
SECTION 10. LAMP HOUSING (SINGLE)..................................................................................................................20
SECTION 11. LAMP HOUSING (DUAL).....................................................................................................................22
SECTION 12. COOLING FAN...................................................................................................................................24
SECTION 13. ACCESSORIES ..................................................................................................................................26
SECTION 14. WIRE JUMPERS ................................................................................................................................27
SECTION 15. HARDWARE KIT (NO PICTURE)..........................................................................................................29
APPENDIX A–1700 SPECIFICATIONS.............................................................................................................30
3M™Overhead Projector 1700 Series Illustrated Parts Breakdown
© 3M 2005. All Rights Reserved. iv
This page is intentionally blank
3M™Overhead Projector 1700 Series Illustrated Parts Breakdown
© 3M 2005. All Rights Reserved. 1
MFG Code
Lette
r
Di
g
it
E 1997 1 Jan-Ma
r
F 1998 2
Apr
-Jun
H 1999 3 Jul-Se
p
J 2000 4 Oct-Dec
K 2001 1 Jan-Ma
r
A
2004 2
Apr
-Jun
C 2005 3 Jul-Se
p
INTRODUCTION
This Illustrated Parts Breakdown (IPB) Manual contains the information necessary to locate and identify
assemblies, sub-assemblies, and specific parts of the 1700 Overhead Projector.
Part Numbers
All components available on a replacement basis are listed with their 3M identification number. The parts
identification list opposite each illustration provides the description adequate to identify components. If the
component is available only as part of the next higher assembly, the description column provides the next
higher assembly description or identification number.
Locating and Identifying a Part
If physical appearance and general location of an item are known:
1. Use the IPB Section Titles to help determine which assembly or sub-assembly includes the item.
2. Refer to the view for the assembly or sub-assembly and locate the item on the exploded view. Match the
part callout number to the corresponding number in the parts list.
3. Parts shown inside a dashed box can only be ordered as an assembly. Any part or mounting hardware
shown outside the box is not included with the assembly.
Machine Identification Plate
The serial number plate for the 1700 is located on the
inside wall of the projector. The Machine Identification
Plate is divided into the following components:
1. Product Name: The specific version number of the
projector.
2. Model Number/Alpha Code: The series number of the
projector followed by a three or four character alpha
code identifier. The Alpha Code indicates the design
level, specific product characteristics, power cord or
distribution specific to a country.
3. Lamp: The electrical rating of the lamp.
4. MFG Code: The MFG Code indicates the year and
quarter the projector was built. (See the example to
the right):
5. S/N: The serial number assigned to this projector.
Ordering Parts
When ordering parts, include the following
information:
1. Machine model number and serial number.
2. Parts identification number.
3. Part description.
4. Quantity required.
For U.S. retail customers: Call 1-800-650-8429, or fax 1-800-650-9268. Dealers: Refer to Dealers Guide.
3M Subsidiaries: Contact Export Operations.
1
5 4 3
2
3M™Overhead Projector 1700 Series Illustrated Parts Breakdown
© 3M 2005. All Rights Reserved. 2
Quick Reference Parts Index
Description Part
Number Section
No. Item
No.
Blade, Fan 78-8054-1823-9 12 1
Diode Kit, Inline 78-8054-1836-1 12 8A
Fresnel Lens, Dual-Element XO-0038-0820-1 7 3
Fuse, 5 Amp, 5x20mm (Brazil only) 26-1005-9599-5 12 3
Singlet Head Assembly (1720, 1760, 1765 Gray color) 78-8120-8554-2 1 8A
Doublet Head Assembly (1730, 1780 Gray color) 78-8120-8555-9 1 8B
Open Head Assembly (1711, 1740, 1745 Gray color) 78-8120-8556-7 1 9
Lamp, Projection, ENX, 82V (Single) 78-8011-1186-1 10 3
Lamp, Projection, ENX, 82V (Dual) 78-8011-1186-1 11 4A
Lamp, Projection, FXL, 82V (1745 and 1765) 78-8073-7100-6 11 4B
Motor, Fan, 120V 78-8120-2914-4 12 7
Power Cord, 10 ft., 120V 78-8079-8822-1 8 4A
Resistor, 1.2 Ohm, 0.25 tab 78-8073-7127-9 9, 10 5A, 13
Socket, Single Lamp, ENX 78-8079-8820-5 10 2
Socket, Dual Lamp, Black 78-8073-3017-6 11 3
Thermostat, Safety (ENX) 78-8079-8872-6 10 7
Top Cover Assembly, Single (Beige color) 78-8114-9027-1 6 1A
Top Cover Assembly, Dual (Beige color) 78-8114-9021-4 6 1B
Top Cover Assembly, Basic (Gray color) 78-8120-8572-4 7 1A
Top Cover Assembly, Lamp Changer (Gray color) 78-8120-8573-2 7 1B
IMPORTANT NOTICE
3M reserves the right to sell or furnish NEW OR RECONDITIONED PARTS.
New and reconditioned parts are covered by the same 3M new parts limited warranty.
3M™Overhead Projector 1700 Series Illustrated Parts Breakdown
© 3M 2005. All Rights Reserved. 3
Section 0. Machine Overview
Head Assembly
(See Section 1)
Top Cover Assembly
(See Sections 6 and 7)
Arm and Focus Assembly
(See Sections 2, 3 and 4)
Control Module
(See Section 9)
Post
Assembly
(See
Section 5)
Base Enclosure
(See Section 8)
Lamp Housing (Single)
(See Section 10)
Lamp Housing (Dual)
(See Section 11)
Cooling Fan
(See Section 12)
Accessories
(See Section 13)
Wire Jumpers
(See Section 14)
Hardware Kit
(See Section 15)
3M™Overhead Projector 1700 Series Illustrated Parts Breakdown
© 3M 2005. All Rights Reserved. 4
Section 1. Head Assembly
6
1 2
4
7
Closed Head
1, 3
Open Head
3
11
10
NOTE:
Screws, nuts, bolts, clips, and other small
hardware are contained in the Hardware Kit:
78-8114-9023-0 (See Section 15).
5
8
9
3M™Overhead Projector 1700 Series Illustrated Parts Breakdown
© 3M 2005. All Rights Reserved. 5
Head Assembly Parts List
Item
No. 3M
Part Number Description Qty.
1 78-8114-8795-4 Lens, Doublet Element 2
2A 78-8120-2934-2 Head Halves, Singlet (Beige color) 1
2B 78-8120-2935-9 Head Halves, Doublet (Beige color) 1
2C 78-8120-8451-1 Head Halves, Singlet (Gray color) 1
2D 78-8120-8464-4 Head Halves, Doublet (Gray color) 1
3 78-8014-8951-5 Lens, Wide Angle, 293mm (Singlet Head only) 1
4 78-8114-8812-7 Mirror 1
5 78-8120-3192-6 Label, Head 1
6 78-8120-2927-6 Lens, Head 1
7 78-8120-3072-0 Bracket, Head Mount, Closed Singlet (Gray color only) 1
8A 78-8120-8554-2 Singlet Head Assembly (1720, 1760, 1765 Gray color) 1
8B 78-8120-8555-9 Doublet Head Assembly (1730, 1780 Gray color) 1
9 78-8120-8556-7 Open Head Assembly (1711, 1740, 1745 Gray color) 1
10 78-8120-8501-3 Open Singlet Mirror Assembly 1
11 (Not available) Housing, Lens, Split, Open Singlet 1
3M™Overhead Projector 1700 Series Illustrated Parts Breakdown
© 3M 2005. All Rights Reserved. 6
Section 2. Arm and Focus Assembly (Beige color)
1
7, 8
6
5
4
910
3
2
See Section 5
12
11
NOTE:
Screws, nuts, bolts, clips, and other small
hardware are contained in the Hardware Kit:
78-8114-9023-0 (See Section 15).
Este manual sirve para los siguientes modelos
11
Tabla de contenidos
Otros manuales de Proyector de 3M
3M
3M Digital Projector X20 Manual
3M
3M X66 - Digital Projector XGA LCD Manual de usuario
3M
3M SCP716W Manual
3M
3M MP220 Manual de instalación y funcionamiento
3M
3M MobiShow Manual de usuario
3M
3M Multimedia Projector X68 Manual
3M
3M Multimedia Projector S15 Manual de usuario
3M
3M DX70 - Digital Projector XGA DLP Hoja de especificaciones
3M
3M Overhead Projector 1800 Series Manual
3M
3M Digital Projector X30N Manual
3M
3M Multimedia Projector MP8745 Manual
3M
3M Multimedia Projector S55i Manual
3M
3M Multimedia Projector S40 Manual de usuario
3M
3M X21 Manual
3M
3M Multimedia Projector MP8725 Manual
3M
3M X36 Manual
3M
3M X95 - Digital Projector XGA LCD Instrucciones de instalación y mantenimiento
3M
3M 1608 Manual de usuario
3M
3M Multimedia Projector MP7630 Manual
3M
3M Multimedia Projector MP8765 Manual
