3M e-Reader Manual de usuario
3
3M™ e-Reader quick start
Use this document to get started with the 3M e-Reader. For information on advanced features, see the online
manual, which is located in the Library folder of the e-Reader.
---------------------------------------------------------------------------------------------------------------------------------------
© 3M, 2012. ll rights reserved.
3M e-Reader Quick Start, 78-8129-4873-8 .
3M is a trademark of 3M Company.
--------------------------------------------------------------------------------------------------------------------------------------
Controls and menu
•Power button.
Press the power button to power on the
device.
Press and hold the power button for several
seconds to power it off.
Notes:
The e-Reader goes into sleep mode after ten
minutes of inactivity. Press the power
button quickly to wake the device up.
When the device is powered on and awake,
pressing the power button quickly calls up
the Task list menu, from which you can
choose a task.
•Paging controls. These are active only when a
book is open.
•Home. Used to return to the main menu.
•Table of Contents. Used to open a book's table
of contents.
•Navigation and Selection button. Used to navigate to an option and select it.
•Directional control used to navigate to an option.
•Selection button used to select an option.
•Back used to return to a previous view.
78-8129-4837-6 Copyright 3M, 2012. ll rights reserved. 1
3M™ Cloud Library
e-Reader controls
Power
Paging
Controls
Home
Table of
Contents
Navigation
and
Selections
Back
Selection
button
Directional
Control
3M e-Reader quick start
Opening an e-Book
When the e-Reader is first powered on, it will open to the place in the last book you were reading. If this is the
first time you've powered on or you prefer reading a different book than the one automatically opened, do the
following:
1. Press the Home key.
2. Choose the Library icon using the Navigation and Selection button.
3. Select a book from the Library:/Digital Editions list.
Locating the online user manual
To locate the e-Reader's online manual, use the Navigation and
Selection button to navigate to the Library folder.
Charging the battery
Note:
The first time you charge the e-Reader battery, keep it
charging for 8–12 hours without switching it on.
Procedure
1. Make sure the device is off.
2. Connect the cable to the charger and the charger to power.
When the device is fully charged, the LED at the bottom
stops blinking and turns a steady yellow.
78-8129-4837-6 Copyright 2012, 3M. ll rights reserved. 2
3M™ Cloud Library
Charging Batter
LED blinks ellow
while charging and
turns a stead
ellow when
charged
Tabla de contenidos
Otros manuales de Lector de libros electrónicos de 3M
