4. Using the system
4.1 Camera adjustments (available only at SCALEREO-Desk)
•Short press (< 0,5s) on button ”Z+”or “Z-“will perform an auto focus adjustment
•Long press (> 0,5s) on button ”Z+”or “Z-“to zoom in or out
•Long press (> 0,5s) on button “F+”to set the focus plane upwards
•Long press (> 0,5s) on button “F-“to set the focus plane downwards
4.2 Photo / video documentation
4.2.1 freeze image
•Press “Freeze Image” to temporarily freeze the current image on the screen (“PAUSE”)
•Press “Freeze Image” again, to go back to “LIVE” image visualization
4.2.2 record photo / video
•Short press (< 0,5s) “Photo/Video” to save the current image as a screenshot
oImage is stored with timestamp locally on SPU & a short confirmation is displayed
•Long press (~ 1s) “Photo/Video” to start the video recording
•Short press (< 0,5s) “Photo/Video” to stop the current video recording
oVideo is stored with timestamp locally on SPU & a short confirmation is displayed
4.2.3 transfer records to USB stick
•insert a USB stick to one of the front USB interfaces of the SPU
•enter the settings menu (center button)
•use the rocker switches (left / right / up / down) to navigate within
the settings menu and the center button to confirm your selection
•Choose “Data”
•Select you USB stick
•Press “Copy” to copy your locally stored records from the SPU to the USB stick
•Wait until transfer is finished (may take several minutes, depending on amount of data)
•Choose, if the copied images & videos should be deleted from
local space on the SPU (e.g. for data privacy reasons)
