OVERVIEW:
This blend of thermal soarer and hotliner is bound to turn some heads at the local flying field.
Designed for quick and easy construction printed in PLA. Designed to suit the 2836 1500kv
outrunner on an 8x4 folding propeller. Utilising ailerons and a V-tail rudder/elevator, this
model flies like it is on rails. With an extremely thin wing profile and sleek fuselage, the
Tracer 2000 has a fantastic glide ratio and penetrates strong wings easily. Links to
components used can be found on the last page of the user guide.
This model has taken many hours of hard work and testing in order to provide a nice flying
aircraft. Please do not share it. Please show your appreciation by directing interested parties
to the link below.
https://cults3d.com/en/3d-model/various/tracer-2000-thermal-glider-3d_aeroworks
GENERAL SPECIFICATIONS
WINGSPAN: 2000mm
PRINT TIME: 80 hrs
PRINT COST: $10 USD
PRINT WEIGHT: 630g
FLYING WEIGHT: 1030g
ELECTRICS
MOTOR: 2836 1500KV
ESC: 40 amp
SERVOS: x2 9g
x2 slim 10g
BATTERY: 2200mah 3s (or similar)
INCLUDED:
STL FILES OF ALL COMPONENTS (scale to 1000% if not using S3D)
FACTORY FILES FOR (S3D) SIMPLIFY 3D FOR PRINTERS: 200x200200
