3Com 3C421600A Manual de programación
®
http://www.3com.com/
SuperStack®II
Remote Access System 1500
System Management Guide
Release 2.0
Part No. 1.024.1797 Rev 2.00
December, 1999
3Com Corporation
5400 Bayfront Plaza
Santa Clara, California
95052-8145
Copyright © 1999, 3Com Corporation. All rights reserved. No part of this documentation may be reproduced
in any form or by any means or used to make any derivative work (such as translation, transformation, or
adaptation) without written permission from 3Com Corporation.
3Com Corporation reserves the right to revise this documentation and to make changes in content from time
to time without obligation on the part of 3Com Corporation to provide notification of such revision or change.
3Com Corporation provides this documentation without warranty of any kind, either implied or expressed,
including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
3Com may make improvements or changes in the product(s) and/or the program(s) described in this
documentation at any time.
UNITED STATES GOVERNMENT LEGENDS:
If you are a United States government agency, then this documentation and the software described herein are
provided to you subject to the following:
United States Government Legend: All technical data and computer software is commercial in nature and
developed solely at private expense. Software is delivered as Commercial Computer Software as defined in
DFARS 252.227-7014 (June 1995) or as a commercial item as defined in FAR 2.101(a) and as such is provided
with only such rights as are provided in 3Com’s standard commercial license for the Software. Technical data is
provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14
(June 1987), whichever is applicable. You agree not to remove or deface any portion of any legend provided
on any licensed program or documentation contained in, or delivered to you in conjunction with, this
User Guide.
[Portions of this documentation are reproduced in whole or in part with permission from (as appropriate).]
Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may
not be registered in other countries.
3Com, the 3Com logo, and SuperStack are registered trademarks of 3Com Corporation.
Intel and Pentium are registered trademarks of Intel Corporation. AIX, AT, IBM, NetView, and OS/2 are
registered trademarks and Warp is a trademark of International Business Machines Corporation. Microsoft,
MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Novell and
NetWare are registered trademarks of Novell, Inc.
Other brand and product names may be registered trademarks or trademarks of their respective holders.
CONTENTS
ABOUT THIS GUIDE
Finding Specific Information in This Guide 13
Conventions 14
Related Documentation 15
Year 2000 Compliance 16
1OVERVIEW
Overview 18
Basic Configuration 18
Port Expansion Module Configuration 18
Primary Access Unit 18
Applications 18
Dial-In 18
Shared ISP 19
LAN-to-LAN 19
Individual Dial-Out 19
Comprehensive Security Options 20
Configuration Options 20
Web Configuration Interface 20
Command Line Interface 20
2USING THE COMMAND LINE INTERFACE
CLI Overview 22
Viewing Command Line Interface Help 22
Navigating the Command Line Interface 22
Obtaining Registered IP Addresses 23
Accessing the CLI 23
IBM Computer-compatible Computers 24
Macintosh Computers 24
UNIX-based Computers 24
Using CLI Quick Setup 24
Configuration with the CLI 25
Step One: Power On the RAS 1500 25
Step Two: Configure the RAS 1500 Basics 25
Step Three: Configure IP 26
Step Four: Configure IPX 27
Step Five: Configure DNS - Optional 30
Step Six: Configure SNMP - Optional 31
Step Seven: Save Your Work 31
64 Character Limit 32
Configuring a Manage User 32
Configuring Specific Modems 33
Configuring Modems in the Router Unit 33
Configuring Modems in the Port Expansion Unit 33
Configuring Modems in the Primary Access Unit 33
Configuring Expansion Units 34
Reconfiguring the Private IP Network 34
Replacing I/O Modules in the Port Expansion Unit 35
Disconnecting Expansion Units 35
Expansion Unit Configuration after Rebooting 35
Configuring the WAN Interface 36
Configuring Static Routes 36
IP Routes 36
IPX Routes 37
3WEB-BASED CONFIGURATION OF THE RAS 1500
Overview 39
Preparing the RAS 1500 for Web-based Management 41
Accessing the RAS 1500 for Web-based Management 43
Web-based Management of the RAS 1500 43
Basic Navigation 43
Setup Wizard 45
Configuration Pages 46
Accessing Help 48
Advanced Configuration 48
4CONFIGURING DIALOUT/IP
Overview 49
Dialout IP Verses Telnet 49
Before You Begin 50
Required Information 50
Optional Information 50
Configuring Your System For DialOut/IP Software 50
Configure the
RAS 1500 51
Configure Client Workstations 54
5CONFIGURING T
ELNET NETWORK DIAL-OUT
Overview 58
Using Telnet Network Dial-out 58
DialOut/IP Versus Telnet 59
Configuring and Using Telnet Network Dial-out 59
Before You Begin 59
Required Information 59
Optional Information 60
RAS 1500 Configuration 60
Computers on the Network 60
Configuring the RAS 1500 61
Step One: Add a System Name 61
Step Two: Add an IP Network 62
Step Three: Add a Modem Group (optional) 62
Step Four: Add the Dial-out Service 63
Step Five: Add Users 65
Step Six: Save Your Work 66
Configuring Network Computers 66
Dialing Out From a Network Computer 67
Case Study 67
6CONFIGURING NETWORK
DIAL-IN
Overview 70
Using Network Dial-In 70
Before You Begin 71
Required Information 71
Configuring the Remote Computer 71
Requirements 71
Communications Software 71
Communication Parameters 71
IP Addresses 72
Configuring RAS 1500 72
IP Address Pool Overview 72
Step One: Configure an IP Address Pool 73
Step Two: Configure IP Network Users 74
Step Three: Configure PPP Parameters 76
Step Four: Configure Additional Parameters 78
Using Callback and Roaming Callback 79
Overview 79
Configuring Callback Users 79
Calling Line Identification Callback 80
Overview 80
Call Handling 82
Configuring CLID Callback 84
Step One:
Add a CLID User 84
Step Two:
Configure the User CLID-callback Settings 84
Step Three:
Configure
CLID Security 86
Troubleshooting CLID Callback 87
Case Study 88
Network Callback User Case Study 88
Assumptions 88
How to Configure this User 88
How it Works 89
Network User Case Study 89
Assumptions 89
How to Configure this User 90
How it Works 90
7LAN-TO-LAN ROUTING
Overview 92
The Difference Between Bridging and Routing 92
Routing Overview 93
IP Routing Overview 94
Dynamic, Static, and Default Routes 95
How the RAS 1500 Routes Packets 95
Establishing Connections to Remote Gateways 96
Spoofing 96
Authentication 96
Before you Begin 97
Required Information 97
Configuring LAN-to-LAN Routing 98
Step One: Add the LAN-to-LAN User 98
Step Two: Configure the User Network Parameters 99
Step Three: Configure the User Dial-out Parameters 100
Step Four: Configure the User Routing Parameters 102
Step Five: Configure the User PPP Parameters 103
Step Six: Configure Phone Numbers 104
Step Seven: Configure Authentication 105
Step Eight: Save Your Work. 105
LAN-to-LAN Routing Case Study 105
Goals 105
Assumptions 105
Strategies 106
Configuring IP on Demand 110
8BRIDGING WITH THE RAS 1500
Overview 112
How the RAS 1500 Acts as a Bridge 112
When to Use Bridging 112
113
Bridging Tips 113
Enabling Bridging Over the LAN 113
Using FCP to Bridge with OfficeConnect Routers 114
Using Fast Connect Protocol 114
9CONFIGURING AN IP T
ERMINAL SERVER
Overview 119
Before You Begin 119
Configuring Remote Computers 119
Setting Communication Parameters 120
Configuring the RAS 1500 Login Hosts 120
Host Name 120
Address 120
Preference 120
Rlogin, Telnet and ClearTCP Ports 121
Configuring Login Users 121
Case Studies 124
Case Study A 124
Case Study B 126
10 ADVANCED MODEM CONFIGURATION WITH CLI/AT
COMMANDS
Overview 130
Before You Begin 130
Connecting to the RAS 1500 130
Accessing the Console Interface 130
AT Commands 130
Sending AT Command 130
Obtaining AT Command Help 131
Commonly Used AT Commands 131
Disconnecting with AT Commands 133
Configuring Data Compression Settings 134
Configuring Error Control Options 136
Using Error Control 137
Configuring Carrier Delay Times 138
Modifying Carrier Receive Delay 139
Configuring Link Option Settings 140
Link Speed Index 140
Obtaining Modem Call Information 144
Modem Query Commands 144
Working with Modem Memory 147
Viewing Settings 147
Saving a Phone Number to Flash Memory 148
Working with the Flash Memory Template 148
Configuring Modem Call Control Settings 149
Configuring 56 Kbps Technology 151
Factory-enabled Protocol 151
Controlling Server x2 151
Disabling V.34 Connections 152
Configuring ISDN 152
Enabling X.75 152
Frame Size 152
Window Size 152
Selecting Frame and Window Size 152
Relationships Between Frames and Windows 153
Viewing Current Frame and Window Size Settings 153
Best Possible Connection 153
Universal Connect Call Flow 154
Answering and Originating Calls 154
Setting the Originate Call Type 154
11 CONFIGURING THE RAS 1500 ROUTER
Reconfiguring Your System 157
Customizing CLI Parameters 157
Discarding and Renaming Files 161
Communicating with Remote and Local Sites 161
Dial, Disconnect, and Hangup Commands 161
Exiting the CLI 162
Network Services 163
Troubleshooting Commands 168
Viewing Facility Errors 168
Terminating an Active Process 168
Resolving Addresses 169
Resolving Host Names 169
Using Ping 169
Viewing RAS 1500 System Information 172
Viewing Interface Status, Settings 172
Monitor PPP Activity 172
Displaying System Information 173
List Commands 173
Show Commands 173
12 USING SECURITY AND ACCOUNTING
Authentication Overview 177
Local Authentication 178
RADIUS Authentication 178
Overview 178
RADIUS Authentication Process 179
Configuring RADIUS Authentication on the RAS 1500 180
NOS Authentication 182
Overview 182
NOS Authentication Process 183
Installation Overview 183
Installing and Configuring NOS Authentication Software
(Novell NetWare) 183
Installing and Configuring NOS Authentication Software
(Windows NT) 189
Changing Encryption Key 191
Configuring NOS Authentication on the RAS 1500 192
Troubleshooting NOS Authentication 195
RADIUS Accounting 195
Configuring RADIUS Accounting 196
Enabling and Disabling RADIUS Accounting 198
13 USING FRAME RELAY
Overview 202
What is Frame Relay? 202
Permanent and Switched Virtual Circuits 202
Data Link Connection Identifier 202
Committed Information Rate 203
Forward and Backward Explicit Congestion Notifications 203
Local Management Interface 203
Supporting Frame Relay 203
Congestion Control 203
Before You Begin 206
Basic Frame Relay Configuration Using the Command Line Interface 206
Frame Relay User Configuration 206
Frame Relay Data Link Configuration 208
Frame Relay PVC Configuration 209
Otros manuales para 3C421600A
4
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Hardware de red de 3Com
3Com
3Com 3C421600A Manual de usuario
3Com
3Com SWITCH 4050 Manual de usuario
3Com
3Com SuperStack 3 4900 Manual de usuario
3Com
3Com AirProtect Enterprise Engine 6100 Manual de usuario
3Com
3Com 486 Manual de usuario
3Com
3Com 3CRWE920G73 Manual de usuario
3Com
3Com 3C17203 - SuperStack 3 Switch 4400 Manual de usuario
3Com
3Com OfficeConnect Remote 510 Manual de usuario
3Com
3Com AccessBuilder 4000 Manual de usuario
3Com
3Com 3CRWEASY96A Manual de usuario
3Com
3Com AirConnect Manual de usuario
3Com
3Com Dual DSX-1 Manual de usuario
3Com
3Com IntelliJack NJ200 Manual de usuario
3Com
3Com DUAL SPEED HUB/PS HUB CASCADE CONVERTER Manual de usuario
3Com
3Com WL-560 Manual de usuario
3Com
3Com 3CR870-95-US - OfficeConnect VPN Firewall Manual de usuario
3Com
3Com 3CRWE725075 Manual de usuario
3Com
3Com WL-560 Manual de usuario
3Com
3Com 4200G Series Manual de usuario
3Com
3Com SuperStack II 3C16971 Manual de usuario
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
