2N SmartCom Manual de usuario
www.2n.czFirmware
Version
2N SmartCom
®
Wireless Device Management over IP
User Manual
1.8.0
1.8.x
The 2N TELEKOMUNIKACE joint-stock company is a Czech manufacturer and supplier of
telecommunications equipment.
The product family developed by 2N TELEKOMUNIKACE a.s. includes GSM gateways, private
branch exchanges (PBX), and door and lift communicators. 2N TELEKOMUNIKACE a.s. has
been ranked among the Czech top companies for years and represented a symbol of stability
and prosperity on the telecommunications market for almost two decades. At present, we
export our products into over 120 countries worldwide and have exclusive distributors on all
continents.
2N is a registered trademark of 2N TELEKOMUNIKACE a.s.. Any product and/or other
®
names mentioned herein are registered trademarks and/or trademarks or brands protected
by law.
2N TELEKOMUNIKACE administers the FAQ database to help you quickly find information and
to answer your questions about 2N products and services. On www.faq.2n.cz you can find
information regarding products adjustment and instructions for optimum use and procedures
„What to do if...“.
Declaration of Conformity
2N TELEKOMUNIKACE hereby declares that the 2N SmartCOM product complies with all
®
basic requirements and other relevant provisions of the 1999/5/EC directive. For the full
wording of the Declaration of Conformity see the CD-ROM enclosed and at www.2n.cz.
The 2N TELEKOMUNIKACE company is the holder of the ISO 9001:2009 certificate. All
development, production and distribution processes of the company are managed by this
standard and guarantee a high quality, technical level and professional aspect of all our
Content
Content
1. Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.2 Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.3 Terms and Symbols Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2. Description and Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.1 Basic Version Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.2 PRO Version Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.3 Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.4 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3. Function and Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.1 Putting in Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.2 GSM LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3.3 Input and Output Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3.4 Input Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4. Configuration by Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4.1 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
4.2 List of Supported AT Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5. Configuration by SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
6. Terminal Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
7. Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
7.1 SC Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
7.2 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
7.3 Control Panel Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
8. AT API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
8.1 AT API Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
8.2 Supported Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
9. User Defined Functions - UDF . . . . . . . . . . . . . . . . . . . . . . . . 110
9.1 UDF Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
9.2 UDF Condition Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
10. sc_config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
11. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
11.1 Firmware Upgrade (Update) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
11.2 Factory Default Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
11.3 Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
12. Technical Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
12.1 Technical Parameters for Basic Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
12.2 Technical Parameters for PRO Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
13. Supplementary Information . . . . . . . . . . . . . . . . . . . . . . . . . 136
13.1 List of Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
13.1 Regulations, Laws and Directives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
13.3 General Instructions and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
52N TELEKOMUNIKACE a.s., www.2n.cz
®
1. Product Overview
In this section, we introduce the product, outline its application2N SmartCOM
®
options and highlight the advantages following from its use. The section also includes
safety precautions.
Here is what you can find in this section:
1.1 Product Description
1.2 Upgrade
1.3 Terms and Symbols Used
62N TELEKOMUNIKACE a.s., www.2n.cz
®
1.1 Product Description
The GPRS communication unit is a new product developed and2N SmartCOM
®
manufactured to provide the maximum utility value, quality and reliability. We hope
you will be fully satisfied with the for a long time. Use 2N SmartCOM
®2N®
in accordance herewith for the purposes it was designed and SmartCOM
manufactured for.
is designed for Internet connection via the GPRS network and data2N SmartCOM
®
retransmission from peripherals connected to RS 232/485/M–Bus via the IP protocol
and GPRS network to a data requesting server or device. Two relay outputs can be
controlled and switched and parameters can be measured on two galvanically
connected inputs.
72N TELEKOMUNIKACE a.s., www.2n.cz
®
Safety Precautions
Do not switch on in the vicinity of medical apparatuses to2N SmartCOM
®
avoid interference. The minimum distance of the antenna and pacemakers should
be 0.5m at least.
Do not switch aboard a plane.2N SmartCOM
®
Do not switch near petrol stations, chemical facilities or2N SmartCOM
®
sites where explosives are used.
Any mobile telephone use prohibition based on RF energy radiation applies
to too.2N SmartCOM
®
may disturb the function of TV sets, radio sets and PCs.2N SmartCOM
®
Warning! contains components that can be swallowed by2N SmartCOM
®
small children (SIM card, antenna, etc.).
Never exceed the voltage value specified on the adapter. Check the
available voltage range before connecting to a different power2N SmartCOM
®
supply.
When comes to the end of its operational life, dispose of it2N SmartCOM
®
in accordance with applicable regulations.
is equipped with an external antenna connector. The2N SmartCOM
®
antenna has to be located indoors for safety reasons.
82N TELEKOMUNIKACE a.s., www.2n.cz
®
Warning
Do not place the unit near heat sources (such as space heaters, hot
air heaters, etc.).
2N SmartCOM
® only works reliably under the conditions specified in
this User Manual. Any unauthorised interventions and/or changes in
use and operation may result in malfunction or destruction of the
product.
92N TELEKOMUNIKACE a.s., www.2n.cz
®
1.2 Upgrade
The manufacturer reserves the right to modify in order to improve its2N SmartCOM
®
qualities.
Manual
Version Changes in Documentation
1.0.0 The User Manual corresponds to FW version 2N SmartCOM
®
.1.0.x
1.1.0 The User Manual corresponds to FW version 2N SmartCOM
®
.1.1.x
1.3.0 The User Manual corresponds to FW version 2N SmartCOM
®
.1.3.x
1.4.0 The User Manual corresponds to FW version 2N SmartCOM
®
.1.4.x
1.5.0 The User Manual corresponds to FW version 2N SmartCOM
®
.1.5.x
1.6.0 The User Manual corresponds to FW version 2N SmartCOM
®
.1.6.x
1.7.0 The User Manual corresponds to FW version 2N SmartCOM
®
.1.7.x
1.8.0
The User Manual corresponds to FW version 2N SmartCOM
®
.1.8.x
Caution
The manufacturer is committed to upgrading the firmware according
to the clients' requirements. Refer to the 2N web sites forwww.2n.cz
the current and GSM module firmware versions and2N SmartCOM
®
User Manual updates.
Refer to the Maintenance section for firmware2N SmartCOM
®
upgrade details.
102N TELEKOMUNIKACE a.s., www.2n.cz
®
1.3 Terms and Symbols Used
Symbols Used in Manual
The following symbols and pictograms are used in the manual:
Safety
abide by this information to prevent persons from injury.Always
Warning
abide by this information to prevent damage to the device.Always
Caution
Important information for system functionality.
Tip
Useful information for quick and efficient functionality.
Note
Routines or advice for efficient use of the device.
AT Command AT command stored in the hyper terminal.
Future Functions and Features
The in this document designates the functions and features that aregrey–marked text
under preparation or development at present.
Otros manuales para SmartCom
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
