247Security ZEUS TITAN Manual de usuario
USER MANUAL
Zeus Titan | Desktop App
247securityinc.com
1.866.693.7492
247securityinc.com
1.866.693.7492
INTRODUCTION
The Zeus Titan DVR captures your vehicle’s video from multiple cameras and organizes the
les allowing end-users to retrieve video with a few mouse clicks. Zeus Titan also makes it
easy for you to access cameras and saved video in real-time.
247securityinc.com | 1.866.693.7492 | 1455 Alderman Drive, Alpharetta GA 30005, USA Pg. 2 of 47
Introduction
Not just state-of-the-art, Zeus TITAN and the DVRViewer Pro software DEFINE the mobile
video surveillance industry.
Zeus TITAN feature:
A dynamic bit rate
Congurable frame rate up to 30 fps per camera
Image quality control
Real-time previewing on all channels
Alarm triggers
Sensor conguration
Easy retrieval and transfer of video les over Modem/WiFi/LAN
GPS tracking
In addition, ZEUS allows end-users to independently manipulate these parameters for each
camera if desired. Note that some parameters should only be adjusted if the user has specific
knowledge or under the direction of 247 Security Inc tech support.
247securityinc.com
1.866.693.7492
1
TABLE OF CONTENTS
247securityinc.com | 1.866.693.7492 | 1455 Alderman Drive, Alpharetta GA 30005, USA Pg. 3 of 47
Table of Contents
Introduction ...............................................................................................
Overview ...................................................................................................
Operation ...................................................................................................
Conguration Zeus Titan .............................................................................
Conguration Menus ...................................................................................
• System Conguration Menu ..................................................................
• Camera Conguration Menu ..................................................................
• Sensor Conguration Menu ...................................................................
• Network Menu ......................................................................................
• Status Menu .........................................................................................
• Tools Menu ...........................................................................................
Reference Appendix ....................................................................................
Connections ................................................................................................
Specications .............................................................................................
Page 2
Pages 4 - 5
Pages 6 - 7
Pages 8 - 11
Pages 12 - 36
Pages 13 - 19
Pages 20 - 26
Page 27
Page 28
Page 29
Pages 30 - 36
Page 37 - 41
Pages 42 - 44
Pages 45 - 47
247securityinc.com
1.866.693.7492
Back
RETROFIT NOTES
247securityinc.com | 1.866.693.7492 | 1455 Alderman Drive, Alpharetta GA 30005, USA Pg. 5 of 47
Retrofit Notes
If replacing a ZEUS PT with a ZEUS TITAN, there are a few important changes:
TITAN uses a dierent power cable than PT
SD Cards are not recommended as a storage media; use a DHD2
247securityinc.com
1.866.693.7492
VIEWING VIDEOS
REMOVING THE MEDIA STORAGE TRAY
247securityinc.com | 1.866.693.7492 | 1455 Alderman Drive, Alpharetta GA 30005, USA Pg. 6 of 47
OPERATION
Operation
Once your Zeus TITAN has been installed, it’s ready to start recording.
To view videos, retrieve the DHD media storage tray from the DVR, connect it to your computer,
and open DVRViewer Pro. Refer to the DVRViewer Pro User Guide for details.
Go to pro.247securityinc.com for more information.
If you have TouchDown, you can upload and view videos from your browser, you don’t need to
retrieve the media storage tray from the vehicle.
The media storage tray (DHD – see below) can be removed and inserted without turning the
vehicle ignition o, but the POWER and REC LEDs must be o. This process is necessary so
that the ZEUS can properly close all video/audio les and safely turn the HDD (hard disc drive)
power o. This process will take roughly 15 to 30 seconds to complete. The feature is helpful
when access to video is needed but vehicle is required to remain running.
For a full explanation of the Titan lights, refer to Status Indicators on page 38
Turn the key to the “Open” position.
Open the door and wait until all lights
are o.
Note: The ignition light will remain
illuminated if the vehicle ignition is on.
247securityinc.com
1.866.693.7492
WIRELESS VIDEO RETRIEVAL
247securityinc.com | 1.866.693.7492 | 1455 Alderman Drive, Alpharetta GA 30005, USA
Gently pull media storage straight out from
the bay until it is free from the rails.
If swapping the drive, insert new media storage,
and close the door.
Turn the key to the “Lock” position.
The ZEUS will now turn the HDD power on,
detect the new media and start recording again.
If viewing videos, connect the media tray to the
computer with the supplied cable.
Refer to the DVRViewer Pro User Manual
for more information.
You can retrieve video from the DVR wirelessly through a wireless network access point.
Refer to the TouchDown manual for more information or talk to your 247 Security Inc representative.
Pg. 7 of 47
OPERATION
247securityinc.com
1.866.693.7492
1. CONNECT TITAN TO PC/LAPTOP
247securityinc.com | 1.866.693.7492 | 1455 Alderman Drive, Alpharetta GA 30005, USA
Your 247 Security installer will congure your TITAN DVR as part of the installation process.
Changes to the initial conguration can be made by following these steps.
1. Connect TITAN to your PC or laptop, with the supplied Ethernet Crossover Cable
2. Set up your computer’s Ethernet port (temporarily) with a static IP
3. Use DVRViewer Pro or a browser to access conguration settings (You can also use DVRViewer)
4. After disconnecting from TITAN, return your laptop/PC to dynamic IP settings as necessary
An Ethernet Crossover Cable is included with the unit. This is how the installer views the cameras
for aiming purposes. A crossover Ethernet cable is slightly dierent than a normal Ethernet cable:
the connection is not between a PC and a network device per se, such as a router/switch/modem,
but between two terminal devices on a LAN.
Use the grey cross-over cable that
shipped with the DVR. Attach one
end to the LAN port on the laptop
or PC,
...and the other end to the DVR port labeled LAN.
Verify that one end of the cable has a “XOVER” label.
A standard Ethernet network cable will not work.
CONFIGURING ZEUS TITAN
Pg. 8 of 47
Configuring Zeus Titan
247securityinc.com
1.866.693.7492
2. STATIC IP SETUP
SETTING UP YOUR PC - WINDOWS 7
SETTING UP YOUR PC - WINDOWS 8
1
247securityinc.com | 1.866.693.7492 | 1455 Alderman Drive, Alpharetta GA 30005, USA
Both your PC/Laptop and the TITAN need to be set up with “static” IP addresses to connect to each
other. TITAN’s default IP address is 192.168.1.100
1. Click on the Start button in the lower left corner
2. Select Control Panel
3. Select and open Network and Sharing Center
4. Select “Change adapter settings”
5. Right click on Local Area Connection
6. Left click on Properties
7. Left click on “Internet Protocol Version 4 (TCP/IPv4)”
8. Left click on Properties
9. Record ANY numbers on this screen; you may need to return to these numbers when nished
conguring TITAN
10. Left click on the Use the following IP Address button
11. In the IP address window type 192.168.1.55
12. Left click on Subnet mask and 255.255.255.0 should display
13. There should be no other numbers in the TCP/IP properties window
14. Left click on OK
15. Left click on Close
1. Drag the mouse pointer to the top right or bottom right “hot corner” until the ve Charms appear
along the right edge of the screen. Drag the mouse pointer and click on Search
(you can also access the Search charm through the keyboard shortcut Windows logo + Q), the
search pane will open; type “Control Panel” and select it from the results to the left
2. Select and open Network and Internet
3. Select and open Network and Sharing Center
4. Select Change adapter settings
5. Right click on Ethernet
6. Select Properties
7. Left click on Internet Protocol Version 4 (TCP/IPv4)
8. Left click on Properties
9. Record ANY numbers on this screen; you may need to return to these numbers when nished
conguring TITAN
10. Left click on Use the following IP Address button
11. In the IP address window type “192.168.1.55”
12. Left click on Subnet mask “255.255.255.0” should populate automatically
13. There should be no other numbers in the TCP/IP properties window
14. Left click on OK
15. Left click on Close
Pg. 9 of 47
CONFIGURING ZEUS TITAN
247securityinc.com
1.866.693.7492
Pg.10 of 47
247securityinc.com | 1.866.693.7492 | 1455 Alderman Drive, Alpharetta GA 30005, USA
SETTING UP YOUR PC - WINDOWS 10
1. Right click on the Start button in the lower left corner
2. Select Network Connections
3. Select and open Network and Sharing Center
4. Select Change adapter settings
5. Right click on Local Area Connection
6. Select Properties
7. Left click on Internet Protocol Version 4 (TCP/IPv4)
8. Left click on Properties
9. Record ANY numbers on this screen; you may need to return to these numbers when nished
conguring TITAN
10. Left click on Use the following IP Address button
11. In the IP address window type “192.168.1.50”
12. Left click on Subnet mask and “255.255.255.0” should populate automatically
13. There should be no other numbers in the TCP/IP properties window
14. Left click on OK
15. Left click on Close
SETTING UP YOUR PC - WINDOWS 11
1. Click the Start button in the lower left corner
2. Type “network connections”, click on View Network Connections
3. Right click Local Area Connection and click Properties
4. Left click on Internet Protocol Version 4 (TCP/IPv4)
5. Click the Properties button
6. Make sure that “Use the following IP address:” is selected
7. In the IP address window type “192.168.1.50”
8. Left click on Subnet mask and “255.255.255.0” should populate automatically
9. Click the OK button
10. Click Close or OK
Note: If the steps in setting up your PC do not work, contact you IT department concerning your PC,
this is a one-time setup to congure the Zeus Titan DVR.
You may need to return your computer to dynamic settings by selecting “Obtain an IP address
automatically”. See Step 4 below.
CONFIGURING ZEUS TITAN
Tabla de contenidos
Otros manuales de DVR de 247Security
247Security
247Security mDVR400 Series Manual de usuario
247Security
247Security ZEUS Manual de usuario
247Security
247Security mDVR500 Series Manual de usuario
247Security
247Security mDVR 600 Series Manual de usuario
247Security
247Security Zeus Series Manual de usuario
247Security
247Security mDVR304 Manual de usuario
247Security
247Security ZEUS PRO Series Manual de usuario
247Security
247Security ZEUS Pt Manual de usuario
247Security
247Security mDVR 500 Series Manual de servicio
247Security
247Security mDVR303 Manual de usuario
