Honeywell Home Pro Series Manual de usuario

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Termostato de Honeywell

Honeywell

Honeywell CM921 Manual de usuario

Honeywell

Honeywell SUITEPRO TB6575 Manual de usuario

Honeywell

Honeywell TheraPro HR90 Manual de usuario

Honeywell

Honeywell RTH7400 series Manual de usuario

Honeywell

Honeywell T8624D Manual de usuario

Honeywell

Honeywell T410A Manual de usuario

Honeywell

Honeywell DELUXEHEATPUMP T8511G Manual de usuario

Honeywell

Honeywell DG115EZIAQ - TrueIAQ Digital IAQ Control Manual de usuario

Honeywell

Honeywell T4398 Series Manual de usuario

Honeywell

Honeywell TH1100DH Manual de usuario

Honeywell

Honeywell Q682B Manual de usuario

Honeywell

Honeywell FocusPRO 6000 Series Manual de usuario

Honeywell

Honeywell FocusPRO 6000 Series Manual de usuario

Honeywell

Honeywell CT8611 Manual de usuario

Honeywell

Honeywell CT8602 Manual de usuario

Honeywell

Honeywell CT3400 Manual de usuario

Honeywell

Honeywell pro Series Manual de usuario

Honeywell

Honeywell T8090A/191108A Manual de usuario

Honeywell

Honeywell RTH2300B Manual de usuario

Honeywell

Honeywell T822 Manual de usuario

Honeywell

Honeywell T8611M7065 Manual de usuario

Honeywell

Honeywell RTH8500WF Manual de usuario

Honeywell

Honeywell T7200D Manual de operación

Honeywell

Honeywell T8000C Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Aube Technologies

Aube Technologies TH305 Manual de usuario

Powtier Controls

Powtier Controls 505MST Manual de usuario

Kanmor

Kanmor Zone Control 369e Manual de usuario

T6 Pro USER MANUAL/USER GUIDE Honeywell Home Pro Series

Contents hide

1 Optional Cover Plate installation

2 UWP Mounting System installation

3 Power options

4 Setting Slider Tabs

5 Thermostat mounting

6 System operation settings

7 Fan operation settings

8 Installer setup (ISU)

9 Installer system test

10 Documents / Resources

T6 Pro Programmable Thermostat Installation Instructions.

Package Includes:

• T6 Pro Thermostat

• UWP Mounting System

• Honeywell Standard Installation Adapter (J-box adapter)

• Honeywell Decorative Cover Plate – Small; size 4-49/64 in x 4-49/64 in x 11/32 in (121 mm

x121 mm x 9 mm)

• Screws and anchors

• 2 AA Batteries

Optional Cover Plate installation

NOTE: If Optional Cover Plate is not required, see “UWP Mounting System installation” on

next page.

Use the Optional Cover Plate when:

• Mounting the thermostat to an electrical junction box

• Or when you need to cover paint gap from old thermostat.

1. Separate the Junction Box Adapter from the Cover Plate. See Figure 1.

2. Mount the Junction Box Adapter to the wall or an electrical box using any of the eight

screw holes. Insert and tighten mounting screws supplied with Cover Plate Kit. Do not

overtighten. See Figure 2. Make sure the Adapter Plate is level.

3. Attach the UWP by hanging it on the top hook of the Junction Box Adapter and then

snapping the bottom of the UWP in place. See Figure 3.

4. Snap the Cover Plate onto the Junction Box Adapter. See Figure 4.

UWP Mounting System installation

Before starting, turn the power off at the breaker box or switch. Open package to find the5.

UWP. See Figure 5.

Position the UWP on wall. Level and mark hole positions. See Figure 6.6.

Drill holes at marked positions, and then lightly tap supplied wall anchors into the wall

using a hammer. ‒ Drill 7/32” holes for drywall.

Pull the door open and insert the wires through wiring hole of the UWP. See Figure 7.7.

8Place the UWP over the wall anchors.Insert and tighten mounting screws supplied with the8.

UWP. Do not overtighten. Tighten until the UWP no longer moves. Close the door. See

Figure8.

Power options

Setting Slider Tabs

Set R Slider Tab.

• Use built-in jumper (R Slider Tab) to differentiate between one or two transformer

systems.

• If there is only one R wire, and it is connected to the R, Rc, or RH terminal, set the slider

to the up position (1 wire).

• If there is one wire connected to the R terminal and one wire connected to the Rc

terminal, set the slider to the down position (2 wires).

NOTE: Slider Tabs for U terminals should be left in place for T6 Pro models.

Wiring terminal designations

Thermostat mounting

1.Push excess wire back into the wall opening.

2. Close the UWP door. It should remain closed without bulging.

3. Align the UWP with the thermostat, and push gently until the thermostat snaps in place.

4. Turn the power on at the breaker box or switch.

System operation settings

1 Press the Mode button to cycle to the next available System mode.

2 Cycle through the modes until the required System mode is displayed and leave it to